Numark WS100 Bedienungsanleitung

Numark Mikrofon WS100

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Numark WS100 (24 Seiten) in der Kategorie Mikrofon. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/24
User Guide
English ( 2 – 5 )
Guía del usuario
Español ( 6 – 9 )
Guide d'utilisation
Français ( 10 – 13 )
Guida per l'uso
Italiano ( 14 – 17 )
Benutzerhandbuch
Deutsch ( 18 – 21 )
Appendix
English ( 22 – 23 )
2
S
p
eakers
Powe
r
User Guide (English)
Introduction
Box Contents
WS100 Microphone Transmitter
WS100 Receiver
Carrying Case
1/4” (6.35 mm) cable
Power Adapter
User Guide
Safety & Warranty Manual
Support
For the latest information about this product (system requirements, compatibility information,
etc.) and product registration, visit numark.com.
For additional product support, visit numark.com/support.
Setup
Connection
Here is just an example of how to use your WS100 in your setup. Items not listed in
Introduction > Box Contents are sold separately.
Mixe
r
WS1
WS1
WS1
WS1WS1
00
00
00
00
00
3
Setting Up the Microphone Transmitter
1. Remove the micropho cover and insert 2 AA ne transmitter’s battery compartment
batteries into compartment. Make sure the polarities of the batteries (+ and –) are correct.
2. Reattach the battery compartment cover.
3. Slide the power switch into the on position. The power indicator will flash briefly to
indicate the microphone transmitter is on.
Setting Up the Receiver
1. For best results, place the receiver at least 3 feet (1 meter) above the ground and place
the antennae in a vertical position.
2. Use the included power adapter to connect the receiver’s power input to a power outlet.
3. Use a standard 1/4” (6.35 mm) cable to connect one of the receiver’s audio outputs to
your mixer or PA system. Do not use both audio outputs at the same time; this can result
in signal loss or increased noise.
4. Press the power button to turn the receiver on.
5. If the microphone transmitter is on, the receiver’s RF indicator will light to show that the
two devices are connected and within range. The receiver and microphone transmitter
are pre-programmed to operate on a regional fixed frequency.
6. Adjust the volume knob to set the audio signal level sent from the audio output to your
mixer or PA system.
Features
Microphone Transmitter
1. Grille: This cover protects the microphone capsule and reduces
noise from air and breath.
2. Power Switch: This three-position switch turns the transmitter on
or off.
i. The transmitter is off.
ii. The transmitter is on, but the audio signal is muted.
iii. The transmitter is on and sending audio to the receiver.
3. Power Indicator: This LED will flash briefly when the power
switch is moved into the on position.
4. Battery Compartment: Insert 2 AA batteries into the
compartment. Make sure the polarities of the batteries (+ and –)
are correct.
W
W
W
W
WS1
S1
S1
S1S100
00
00
00
00
4
3
2
1

Produktspezifikationen

Marke: Numark
Kategorie: Mikrofon
Modell: WS100

Brauchst du Hilfe?

Wenn Sie Hilfe mit Numark WS100 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Mikrofon Numark

Numark

Numark WS100 Bedienungsanleitung

30 Juli 2024

Bedienungsanleitung Mikrofon

Neueste Bedienungsanleitung für -Kategorien-

Power Dynamics

Power Dynamics PD524 Bedienungsanleitung

15 Oktober 2024
AKG

AKG WMS420 Bedienungsanleitung

13 Oktober 2024
Sennheiser

Sennheiser ew 100 G4-845-S Bedienungsanleitung

13 Oktober 2024
Audio-Technica

Audio-Technica BP892xCH Bedienungsanleitung

12 Oktober 2024
Sennheiser

Sennheiser SKM 300-835 G3-G Bedienungsanleitung

9 Oktober 2024
Sennheiser

Sennheiser SKM 500 G4 Bedienungsanleitung

9 Oktober 2024
Audio-Technica

Audio-Technica ATM610a Bedienungsanleitung

8 Oktober 2024
Omnitronic

Omnitronic AAB-10 Bedienungsanleitung

8 Oktober 2024
AKG

AKG CBL201B Bedienungsanleitung

8 Oktober 2024
Audio-Technica

Audio-Technica BP894x Bedienungsanleitung

7 Oktober 2024