NovoPro CDJ Dual Table Stand Bedienungsanleitung
NovoPro
fahrradständer
CDJ Dual Table Stand
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für NovoPro CDJ Dual Table Stand (2 Seiten) in der Kategorie fahrradständer. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/2
Step 7
Final and IMPORTANT adjustments:
Please ensure that you have selected
your preferred tray working angle, you
have the support mounts in the correct
place and have the foam EVA pads pro-
tecting your equipment.
Tighten all nuts, bolts and screws as
required.
Your Novopro CDJ dual stand is now
ready to be used.
Please remove your equipment from
the stand before making any adjustments
to the position of the trays.
d 2015.E&OE.
Please carefully unpack the
contents.
You will find the fixings and screws
inside the rectangular box, we
suggest you lay out the parts on a
suitable area so you have these
ready for the following steps.
Please locate one of the main
trays as shown.
Connecting the tray to the arm:
Whilst holding a nut inside the tray
arm, slide the bolt through the
hole and then tighten with the
supplied allen key.
Do this for the top and bottom
parts of the arm as shown.
Then push in the plastic end cap
onto the tray arm.
Adding the support mounts:
There are four L shaped metal brackets to hold your player in place.
You can select the most suitable position from the 8 available holes.
(larger CDJ style units use the outer hole positions)
These are attached using the smaller nuts and bolts within the package.
Please tighten these into position.
Attach the rectangular foam EVA protective pads to these brackets once
you have ensured they are in the correct position – this is important
so that you do not damage your equipment.
Attaching the main support pole:
Insert the OPEN END of the main
pole into the base – the plastic
capped end should be visible,
facing upwards.
Tighten the pole using a chrome
butterfly bolt.
Attach the round foam EVA protec-
tive pads to the underside of the
base plate.
Now attach the metal collar to the
main pole as shown and tighten to
the pole using a chrome butterfly
bolt.
Attaching the tray arm to the
metal collar:
You will find that inserting the
retaining pin bolt (that adjusts the
tray angle) will make this step
easier….
Position the tray arm and use the
nuts and bolts to secure to the me-
tal collar and then add the plastic
end cap – in the same way as STEP 2.
PLEASE REPEAT STEPS 1-6 FOR THE
SECOND TRAY.
Step 4
Step 6
Step 1
Step 2
Step 3
Step 5
Produktspezifikationen
| Marke: | NovoPro |
| Kategorie: | fahrradständer |
| Modell: | CDJ Dual Table Stand |
Brauchst du Hilfe?
Wenn Sie Hilfe mit NovoPro CDJ Dual Table Stand benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung fahrradständer NovoPro
24 Juli 2024
29 Mai 2024
Bedienungsanleitung fahrradständer
Neueste Bedienungsanleitung fĂĽr -Kategorien-
5 September 2024
5 September 2024
26 Dezember 2023