Nieaf-Smitt VoltSafe Bedienungsanleitung


Lesen Sie kostenlos die đŸ“– deutsche Bedienungsanleitung fĂ¼r Nieaf-Smitt VoltSafe (20 Seiten) in der Kategorie Messgeräte. Dieser Bedienungsanleitung war fĂ¼r 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/20
VoltSafe
VoltPointer
2
Approaching a voltage leading
part, the voltage detectors will
indicate this in several ways.
The VoltSpotter will give an
optic signal, the VoltBeeper an
optic as well as an acoustic
signal. The VoltSafe and the
VoltPointer are not only instru-
ments for voltage detection but
also for non-voltage detection,
only if earthed properly.
Auto / Manual Voltage Detection Non-Voltage Detection(M)
LED (red) Sound LED (green) Flashlight
VoltSpotter A U
VoltPointer A/M U U U U
VoltBeeper A U U
VoltSafe A/M U U U
3
Symbols on the instrument
and in the instruction
manual.
 Warns of potential danger,
consult instruction manual.
 Equipment protected by
double or reinforced insulation.
 Symbol of conformity,
confirms conformity with
relevant EUDirectives.
The instrument complies with
the EMC Directive (89/336/
EEC) specifically standards EN
50081-1 and EN 50082-1, as
well as the low Voltage
Directive (73/23/EEC)
described in the standard
EN 61010-1.
Instruction :
The contact-free voltage
detector has been developed
for voltage detecting on
(insulated) cables and conduc-
tors.
The voltage detectors do not
require maintenance. Power is
supplied by two micro batteries
AAA, 1.5 Volt IEC LR 03
(included).
Cleaning :
Use a damp cloth with house-
hold cleaner and wipe the
surface by applying light
pressure. Do not use the tester
till it is completely dry.


Produktspezifikationen

Marke: Nieaf-Smitt
Kategorie: Messgeräte
Modell: VoltSafe

Brauchst du Hilfe?

Wenn Sie Hilfe mit Nieaf-Smitt VoltSafe benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Messgeräte Nieaf-Smitt

Bedienungsanleitung Messgeräte

Neueste Bedienungsanleitung fĂ¼r -Kategorien-