Netgear AGM732F Bedienungsanleitung

Netgear Nicht kategorisiert AGM732F

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Netgear AGM732F (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

ProSafe® GBIC SFP Modules AGM731F and AGM732F

Package Contents

• ProSafe® GBIC SFP Modules AGM731F and AGM732F

• Installation Guide

Install Your Optical Module

The 1000Base-X SFP Module provides full-duplex 1000 M bps Ethernet operation in

each direction for NETGEAR managed switches.

The switch automatically detects the module, so you can simply plug it into an

available module slot. Plugging in an SFP module disables the associated RJ-45

port.

Because invisible laser radiation might be emitted

from the aperture of the port when no fiber cable is

connected, avoid exposure to laser radiation and do

not stare into open apertures.

The module can be inserted or removed while the switch is operational.

AGM731F or AGM732F

Install a Module

Insert the module firmly into the slot that supports the SFP interface. You should

hear a click when the module is firmly seated.

Remove a Module

Release the module latch by pulling down the handle bar across the module, and

pull the module out of the module slot.

Table 1. Technical Specifications

Statement of Conditions

In the interest of improving internal design, operational function, and reliability,

NETGEAR reserves the right to change the product described in this document

without notice. NETGEAR does not assume any liability that may accrue due to the

use or application of the product(s) or circuit layout(s) described herein.

Standards IEEE 802.3z

AGM731F 1000Base -SX

AGM732F 1000Base-LX

Connectors AGM731F: SC for 62.5 um or 50 um cable

AGM732F: LC for 9 um cable

Operating temperature 32 to104º F (0 to 40ºC)

Storage temperature 14 to158 ºF (–10 to 70ºC)

Operating relative humidity 10 to 90% non-condensing

Operating altitude AGM731F: up to 3 Km (10 K ft)

AGM732F: up to 10 Km (32.8 K ft)

Operating distance AGM731F: 550 m

AGM732F: 10Km

Power consumption 500 mW

MTBF AGM731F: >10 years

AGM732F: >10 years

Safety certification UL 1950, CSA 22.2 No.60 950

Environmental compliance RoHS

AGM731F-AGM732F IG 17Oct11.fm Page 1 Monday, October 17, 2011 11:54 AM

September 2011

Regulatory Compliance

Certificate of Manufacture/Importer

Note:

EN 55 024 Declaration of Conformance

FCC Compliance Notice: Radio Frequency Interference

•

Operation of this equipment in a residential area is likely to cause

harmful interference, in which case users will be required to take whatever

measures may be necessary to correct the interference at their own expense.

FCC Caution

•

Class 1 LED product.

Because invisible laser radiation may be emitted

from the aperture of the port when no fiber cable is

connected, avoid exposure to laser radiation and do

not stare into open apertures.

Class 1 laser product.

Technical Support

http://www.NETGEAR.com/register.

http://support.netgear.com.

http://support.netgear.com/app/answers/detail/a_id/11621.

http://support.netgear.com/app/answers/detail/a_id/2649.

WARNING!! Do not

AGM731F-AGM732F IG 17Oct11.fm Page 2 Monday, October 17, 2011 11:54 AM

Produktspezifikationen

Marke:	Netgear
Kategorie:	Nicht kategorisiert
Modell:	AGM732F
Warentarifnummer (HS):	85177900
Verkabelungstechnologie:	1000Base-LX
Datenübertragungsrate:	1 Gbit/s
Data Link Protokolle:	Gigabit Ethernet