Necchi Type A 420 Bedienungsanleitung

Necchi Nähmaschine Type A 420

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Necchi Type A 420 (64 Seiten) in der Kategorie Nähmaschine. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/64
INSTRUCTION MANUAL
Type A 420
Type B 422
Type C 424
INSTRUCTION MANUAL
This sewing machine is intended for household use.
IMPORTANT SAFETY INSTRUCTIONS
When using a sewing machine, basic safety precautions should always be followed,
including the following.
Read all instructions before using.
DANGER - To reduce the risk of electric shock:
Never leave unattended when plugged in. Always unplug this machine from the electric
outlet immediately after using and before cleaning.
WARNING-
To reduce the risk of burns, fire, electric shock, or injury to persons:
1.Do not allow to be used as a toy. Close attention is necessary when this sewing machine
is used by or near children.
2.Use this sewing machine only for its intended use as described in this manual. Use only
attachments recommended by the manufacturer as contained in this manual.
3.Never operate this sewing machine if it has a damaged cord or plug, if it is not working
properly, if it has been dropped or damaged, or dropped into water. Return the sewing
machine to the nearest authorized dealer or service center for examination, repair,
electrical or mechanical adjustment.
4.Never operate the sewing machine with any air openings blocked. Keep ventilation
openings of the sewing machine and foot controller free from the accumulation of lint,
dust, and loose cloth.
5.Never drop or insert any object into any opening.
6.Do not use out doors.
7.Do not operate where aerosol (spray) products are being used or where oxygen is being
administered.
8.To disconnect, turn the power switch to the off position (symbol ), then remove plugO
from outlet.
9.Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
10.Keep fingers away from all moving parts. Special care is required around the sewing
machine needle.
11.Always use the proper needle plate. The wrong plate can cause the needle to break.
12.Do not use bent needles.
13.Do not pull or push fabric while stitching. It may deflect the needle causing it to break.
14.Switch the sewing machine off (symbol ) when making any adjustments in the needleO
area, such as threading needle, changing needle, threading bobbin, or changing presser
foot.
15.Always unplug sewing machine from the electrical outlet when removing covers,
lubricating, or when making any other user servicing adjustments mentioned in the
instruction manual.
16.Handle the foot controller with care and avoid dropping it on the floor. Be sure not to
place anything on top of it.
17.Use only the handle to lift and move the machine.
18.Do not expose the machine or machine plastic case to sunlight directly. Also, do not
keep it in a very warm or damp place.
SAVE THESE INSTRUCTIONS
Servcing should be performed by an authorized service representative.
1
CONTENTS
MAIN PARTS ............................................. 2
CONTROL PANEL ..................................... 3
CONNECTING THE MACHINE ................. 4
FOOT CONTROLLER................................ 4
ACCESSORIES ......................................... 5
DUST COVER............................................ 5
EXTENSION TABLE .................................. 6
CHANGING THE PRESSER FOOT .......... 6
INSERTING THE NEEDLE ........................ 7
FABRIC, THREAD AND NEEDLE TABLE . 7
-TYPE A- FUNCTION OF EACH PART ..... 8
-TYPE B, C- FUNCTION OF EACH PART10
-TYPE A-
TO SELECT A UTILITY PATTERN.......... 12
-TYPE B-
TO SELECT A UTILITY PATTERN.......... 14
-TYPE C-
TO SELECT A PATTERN ........................ 16
BOBBIN SETTING ................................... 20
THREADING THE MACHINE .................. 22
STARTING TO SEW ................................ 24
-TYPE A- THREAD TENSION ................. 27
-TYPE B, C-
ADJUSTING THE THREAD TENSIONS . 28
STRAIGHT STITCH SEWING ................. 29
ZIGZAG STITCH SEWING ...................... 30
MULTI-STITCH ZIGZAG .......................... 30
FREE ARM SEWING ............................... 30
OVERCASTING-OVERLOCKING ........... 31
BLIND HEM STITCHING ......................... 32
ELASTIC STITCH SEWING..................... 33
SCALLOP STITCH................................... 33
INSERTING ZIPPERS
CENTERED INSERTION ......................... 34
LAPPED INSERTION .............................. 35
BUTTONHOLE SEWING ......................... 36
-TYPE A ONLY- BOUND BUTTONHOLE 38
SEWING ON BUTTONS .......................... 40
QUILTING ................................................ 42
HAND LOOK QUILTING STITCH ............ 43
UTILITY DECORATIVE STITCHES......... 43
-TYPE A-
DECORATIVE AND LETTER STITCH
SEWING ................................................... 44
-TYPE B-
DECORATIVE AND LETTER STITCH
SEWING ................................................... 47
APPLIQUE ............................................... 50
PATCH WORK ......................................... 50
TWIN NEEDLE SEWING ......................... 51
AUTOMATIC BAR-TACK / DARNING ..... 52
-TYPE A ONLY- NARROW HEMMING ... 53
-TYPE A ONLY- CORDING ..................... 53
-TYPE A ONLY- DARNING/FREE-HAND
EMBROIDERY ......................................... 54
-TYPE A, C ONLY- EYELET .................... 55
ADJUSTING THE FORWARD AND
REVERSE STITCHES ............................. 55
MAINTENANCE ....................................... 56
HELPFUL HINT........................................ 57
-TYPE A, B - PATTERN CHART ............. 58


Produktspezifikationen

Marke: Necchi
Kategorie: Nähmaschine
Modell: Type A 420

Brauchst du Hilfe?

Wenn Sie Hilfe mit Necchi Type A 420 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nähmaschine Necchi

Bedienungsanleitung Nähmaschine

Neueste Bedienungsanleitung für -Kategorien-