NEC WT610 Bedienungsanleitung

NEC Der Projektor WT610

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für NEC WT610 (7 Seiten) in der Kategorie Der Projektor. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/7

NEC Solutions (America), Inc.

Visual Systems

WT610™ Installation Guide

Desktop and Ceiling Mount v1.7

www.necvisualsystems.com WT610 Page 1 of 7

Contents

Product Description, Lens Specs, Notes and Formulas Page 1

Diagrams and Distance Charts

Ceiling Mounted Installation Page 2

Desktop Setup Page 3

Cabinet Dimensions

Top, Front and Right Side Page 4

Bottom, Back and Left Side Page 5

Optional Ceiling Mount Dimensions Page 6

Control Codes Page 7

Product Description

Type: 1 chip DMDTM Lens-less projector Dimensions: 15.0”(W) x 12.3”(H) x 12.3”(D) w/final mirror up

4 mirror bounce optical system Weight: 14.1 lbs

Native Resolution: 1024 x 768 (1024x768 for 16:9 screens Screen Range: 40” – 100” Diagonal (4:3)

Brightness: 2000 lumens (1500 ANSI)

Screen/Aspect Ratio_

Both 4:3 and 16:9 screens are fully supported with proper aspect ratio control for both type sources using NEC developed

scaling technology. By selecting the screen type in the menus, Aspect Ratio control is reconfigured for that screen type.

• For a 4:3 screen; select “4:3” in the “Screen” menu for proper aspect ratio control of 4:3 and 16:9 sources.

• For a 16:9 screen; select “16:9” in the “Screen” menu for proper aspect ratio control of 4:3 and 16:9 sources.

Factory default “Screen” setting is “4:3”.

Notes

 For screen sizes not indicated on the projection charts, use the formulas below.

 The ceiling must be strong enough to support the projector and the installation must be in accordance with any local

building codes.

• Distances are in inches, for millimeters multiply by 25.4.

• ± Distances may vary 5%.

Formulas

The Projection Formulas use the image width for calculation. Image width is the same for all aspect ratios, only vertical image size

varies. For proper projector placement, determine the image width for a desired screen size. Use the Screen Formulas below to

calculate all screen dimensions. Plug the screen width in for “W” in the Projection Formulas.

Refer to the diagrams and charts for popular screen sizes on page 2 and 3.

Definitions: 4:3 Screen Formulas:

W = Screen width W = H x 4/3

H = Screen height H = W x 3/4

B = Vertical distance between projector foot and screen center Screen Diagonal = W x 5/4

C = Throw distance

D = Vertical distance between projector foot and screen bottom

(screen top for ceiling mounted application) 16:9 Screen Formulas:

= H x 16/9 W

= W x 9/16 H

Projection Formulas: Screen Diagonal = W x 18.358/16

B = 0.6882W + 3.935

C = 0.4874W - 13.056

D(4:3) = 0.3132W + 3.935

D(16:9) = 0.407W + 3.935

Vertical Position for a 16:9 screen: The Vertical Position adjustment moves the 16:9 image up and down in the unused portion of

the 4:3 DLP panel. This adjustment is only available when the projector is set for 16:9 in the “Screen” menu. The range of Vertical

Position is dependent on aspect ratio and 3D Reform used. If 3D Reform is not used, the approximate range of vertical position is

+/-0.167H (H=Screen Height) when using a 16:9 screen. (See “Screen Type” and “Position” in user manual)

Ceiling Mounted Installation

The following diagram shows the relationship between projector position and the screen. Refer to the charts below for data.

Distances are in inches. For millimeters multiply by 25.4.

www.necvisualsystems.com WT610 Page 2 of 7

Distance chart for popular 4:3 screen sizes

Distance chart for popular 16:9 screen sizes

55°

5.1"

4.1"

Diagonal Width(W) Height(H)

inches inches inches inches inches inches

40 32 24 26.0 2.5 14.0

60 48 36 37.0 10.3 19.0

67 53.6 40.2 40.8 13.1 20.7

72 57.6 43.2 43.6 15.0 22.0

84 67.2 50.4 50.2 19.7 25.0

90 72 54 53.5 22.0 26.5

100 80 60 59.0 25.9 29.0

Image Size (4:3) B C D(4:3)

Diagonal Width(W) Height(H)

inches inches inches inches inches inches

37 32 18 26.0 2.5 17.0

40 35 19.7 28.0 4.0 18.2

83 72 40.5 53.5 22.0 33.2

92 80 45 59.0 25.9 36.5

D(16:9)

Image Size (16:9) B C

Vertical Position for a 16:9 screen: The Vertical Position adjustment moves the 16:9 image

up and down in the unused portion of the 4:3 DLP panel. This adjustment is only available when

the projector is set for 16:9 in the “Screen” menu. The range of Vertical Position is dependent

on aspect ratio and 3D Reform used. If 3D Reform is not used, the approximate range of

vertical position is +/-0.167H (H=Screen Height) when using a 16:9 screen. (See “Screen Type”

and “Position” in user manual)

Note: For screen sizes not indicated in the distance charts, use the formulas on page 1.

Desktop Setup

The following diagram shows the relationship between projector position and the screen. Refer to the charts below for data.

Distances are in inches. For millimeters multiply by 25.4.

www.necvisualsystems.com WT610 Page 3 of 7

Distance chart for popular 4:3 screen sizes

Distance chart for popular 16:9 screen sizes

55°

Diagonal Width(W) Height(H)

inches inches inches inches inches inches

40 32 24 26.0 2.5 14.0

60 48 36 37.0 10.3 19.0

67 53.6 40.2 40.8 13.1 20.7

72 57.6 43.2 43.6 15.0 22.0

84 67.2 50.4 50.2 19.7 25.0

90 72 54 53.5 22.0 26.5

100 80 60 59.0 25.9 29.0

Image Size (4:3) B C D(4:3)

Diagonal Width(W) Height(H)

inches inches inches inches inches inches

37 32 18 26.0 2.5 17.0

40 35 19.7 28.0 4.0 18.2

83 72 40.5 53.5 22.0 33.2

92 80 45 59.0 25.9 36.5

D(16:9)

Image Size (16:9) B C

Vertical Position for a 16:9 screen: The Vertical Position adjustment moves the 16:9 image

up and down in the unused portion of the 4:3 DLP panel. This adjustment is only available when

the projector is set for 16:9 in the “Screen” menu. The range of Vertical Position is dependent

on aspect ratio and 3D Reform used. If 3D Reform is not used, the approximate range of

vertical position is +/-0.167H (H=Screen Height) when using a 16:9 screen. (See “Screen Type”

and “Position” in user manual)

Note: For screen sizes not indicated in the distance charts, use the formulas on page 1.

Produktspezifikationen

Marke:	NEC
Kategorie:	Der Projektor
Modell:	WT610
Gewicht:	6400 g
RMS-Leistung:	1 W
Anzahl USB 2.0 Anschlüsse:	1
Fernbedienung enthalten:	Ja
Zertifizierung:	CE; TÜV GS; RoHS
Stromverbrauch (Standardbetrieb):	370 W
Plug & Play:	Ja
Kontrastverhältnis:	3500:1
Bildwinkel, horizontal:	55 °
Stromverbrauch (Standby):	12 W
Energiebedarf:	100-120 V/220-240 V AC; 50 - 60 Hz
Audioeingang (L, R):	1
Audio (L,R) Out:	1
Composite Video-Eingang:	1
PC Audio-Eingang:	Ja
Komponenteneingang Video (YPbPr/YCbCr):	1
DVI Anschluss:	Ja
Abmessungen (BxTxH):	380 x 313 x 318 mm
Projektorhelligkeit:	2000 ANSI Lumen
Projektionstechnologie:	DLP
native Auflösung des Projektors:	XGA (1024x768)
Anzahl VGA (D-Sub) Anschlüsse:	1
Weiteres Zubehör:	IR Remote Control (RD-407E)
Lampenleistung:	275 W
Typ der Lichtquelle:	Lampe
Brennweitenbereich:	3.5 - 14.9 mm
Anzahl S-Video-Eingänge:	1
Vertikaler Scanbereich:	48 - 120 Hz
Horizontaler Scanbereich:	15 - 100 kHz
Lebensdauer der Lichtquelle (ökonomischer Modus):	4000 h
Netzwerkfunktionen:	W-LAN (IEEE 802.11b/g), LAN PC Card
Schallldruckpegel:	32 dB
Fokusbereich der Linse:	F= 3.5