NEC ST-EX2023 Bedienungsanleitung
NEC
Flachbildschirmunterstützung
ST-EX2023
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für NEC ST-EX2023 (2 Seiten) in der Kategorie Flachbildschirmunterstützung. Dieser Bedienungsanleitung war für 19 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/2
ST-EX2023 Installation Instructions / Instructions d'installation / Montageanweisung /Instrucciones de instalación /
Istruzioni di installazione / 取扱説明書 / 安装说明书
English
Materials included in package
1. ST-EX2023 with attachment foot for EX201W x 1
2. Attachment foot for EX231W or EX231Wp x 1
3. Rubber feet x 2
4. Quick Start Guide x 1
Français
Materials included in package
1. ST-EX2023 with attachment foot for EX201W x 1
2. Attachment foot for EX231W or EX231Wp x 1
3. Rubber feet x 2
4. Quick Start Guide x 1
Deutsch
Materials included in package
1. ST-EX2023 with attachment foot for EX201W x 1
2. Attachment foot for EX231W or EX231Wp x 1
3. Rubber feet x 2
4. Quick Start Guide x 1
Español
Materials included in package
1. ST-EX2023 with attachment foot for EX201W x 1
2. Attachment foot for EX231W or EX231Wp x 1
3. Rubber feet x 2
4. Quick Start Guide x 1
Italiano
Materials included in package
1. ST-EX2023 with attachment foot for EX201W x 1
2. Attachment foot for EX231W or EX231Wp x 1
3. Rubber feet x 2
4. Quick Start Guide x 1
日本語
Materials included in package
1. ST-EX2023 with attachment foot for EX201W x 1
2. Attachment foot for EX231W or EX231Wp x 1
3. Rubber feet x 2
4. Quick Start Guide x 1
简体中文
Materials included in package
1. ST-EX2023 with attachment foot for EX201W x 1
2. Attachment foot for EX231W or EX231Wp x 1
3. Rubber feet x 2
4. Quick Start Guide x 1
1234
AB
English
1
2 3
Français Deutsch
Installing stand:
You use this stand for both size 20" (EX201W) and 23" (EX231W/EX231Wp)
by change attachment foot.
CAUTION: Do not use this stand for EX201W with attachment foot for
EX231W/EX231Wp. It may cause monitor fall down and make serious
damage to the monitor.
For EX201W user: Proceed to step 3.
For EX231W or EX231Wp user: Change attachment foot following the below
instruction.
1 Press Quick Release Button and pull out the attachment foot.A
2 Attach the attachment foot with "23 only".
3 1) Turn off the power to the monitor.
2) Paste two rubber feet on the bottom of the monitor.B
3) Place monitor face down on a non-abrasive surface.
NOTE: Handle with care when placing monitor face down to avoid
damaging the front control keys.Put the upper hooks of the stand in the
slot of the monitor then push stand into monitor in direction of the arrow
as shown and conrm that the stand is locked. Open the stand with
widely extended until feeling a "click" feeling.
To reattach the stand, please refer to monitor's user's manual.
Before using:
Use this stand with widely extended until feeling a "click" feeling.
CAUTION: Improper setting may cause the monitor fall down and make serious damage to the monitor.
Human Sensor position is below as normal stand. Please make sure there is no object in front of Human Sensor.
Be sure to observe the cautions described in the monitor's operating manual when handling the monitor.
For EX201W
For EX231W / EX231Wp
Unit: mm
Weight: ??
Weight: ??
Installing stand:
You use this stand for both size 20" (EX201W) and 23" (EX231W/EX231Wp)
by change attachment foot.
CAUTION: Do not use this stand for EX201W with attachment foot for
EX231W/EX231Wp. It may cause monitor fall down and make serious
damage to the monitor.
For EX201W user: Proceed to step 3.
For EX231W or EX231Wp user: Change attachment foot following the below
instruction.
1 Press Quick Release Button and pull out the attachment foot.A
2 Attach the attachment foot with "23 only".
3 1) Turn off the power to the monitor.
2) Paste two rubber feet on the bottom of the monitor.B
3) Place monitor face down on a non-abrasive surface.
NOTE: Handle with care when placing monitor face down to avoid
damaging the front control keys.Put the upper hooks of the stand in the
slot of the monitor then push stand into monitor in direction of the arrow
as shown and conrm that the stand is locked. Open the stand with
widely extended until feeling a "click" feeling.
To reattach the stand, please refer to monitor's user's manual.
Before using:
Use this stand with widely extended until feeling a "click" feeling.
CAUTION: Improper setting may cause the monitor fall down and make serious damage to the monitor.
Human Sensor position is below as normal stand. Please make sure there is no object in front of Human Sensor.
Be sure to observe the cautions described in the monitor's operating manual when handling the monitor.
For EX201W
For EX231W / EX231Wp
Unité: mm
Poids: ??
Poids: ??
Installing stand:
You use this stand for both size 20" (EX201W) and 23" (EX231W/EX231Wp)
by change attachment foot.
CAUTION: Do not use this stand for EX201W with attachment foot for
EX231W/EX231Wp. It may cause monitor fall down and make serious
damage to the monitor.
For EX201W user: Proceed to step 3.
For EX231W or EX231Wp user: Change attachment foot following the below
instruction.
1 Press Quick Release Button and pull out the attachment foot.A
2 Attach the attachment foot with "23 only".
3 1) Turn off the power to the monitor.
2) Paste two rubber feet on the bottom of the monitor.B
3) Place monitor face down on a non-abrasive surface.
NOTE: Handle with care when placing monitor face down to avoid
damaging the front control keys.Put the upper hooks of the stand in the
slot of the monitor then push stand into monitor in direction of the arrow
as shown and conrm that the stand is locked. Open the stand with
widely extended until feeling a "click" feeling.
To reattach the stand, please refer to monitor's user's manual.
Before using:
Use this stand with widely extended until feeling a "click" feeling.
CAUTION: Improper setting may cause the monitor fall down and make serious damage to the monitor.
Human Sensor position is below as normal stand. Please make sure there is no object in front of Human Sensor.
Be sure to observe the cautions described in the monitor's operating manual when handling the monitor.
For EX201W
For EX231W / EX231Wp
Einheit: mm
Gewicht: ??
Gewicht: ??
Español
日本語
Italiano
简体中文
Installing stand:
You use this stand for both size 20" (EX201W) and 23" (EX231W/EX231Wp)
by change attachment foot.
CAUTION: Do not use this stand for EX201W with attachment foot for
EX231W/EX231Wp. It may cause monitor fall down and make serious
damage to the monitor.
For EX201W user: Proceed to step 3.
For EX231W or EX231Wp user: Change attachment foot following the below
instruction.
1 Press Quick Release Button and pull out the attachment foot.A
2 Attach the attachment foot with "23 only".
3 1) Turn off the power to the monitor.
2) Paste two rubber feet on the bottom of the monitor.B
3) Place monitor face down on a non-abrasive surface.
NOTE: Handle with care when placing monitor face down to avoid
damaging the front control keys.Put the upper hooks of the stand in the
slot of the monitor then push stand into monitor in direction of the arrow
as shown and conrm that the stand is locked. Open the stand with
widely extended until feeling a "click" feeling.
To reattach the stand, please refer to monitor's user's manual.
Before using:
Use this stand with widely extended until feeling a "click" feeling.
CAUTION: Improper setting may cause the monitor fall down and make serious damage to the monitor.
Human Sensor position is below as normal stand. Please make sure there is no object in front of Human Sensor.
Be sure to observe the cautions described in the monitor's operating manual when handling the monitor.
For EX201W
For EX231W / EX231Wp
Unidad: mm
Peso: ??
Peso: ??
For EX201W For EX231W / EX231Wp
Installing stand:
You use this stand for both size 20" (EX201W) and 23" (EX231W/EX231Wp)
by change attachment foot.
CAUTION: Do not use this stand for EX201W with attachment foot for
EX231W/EX231Wp. It may cause monitor fall down and make serious
damage to the monitor.
For EX201W user: Proceed to step 3.
For EX231W or EX231Wp user: Change attachment foot following the below
instruction.
1 Press Quick Release Button and pull out the attachment foot.A
2 Attach the attachment foot with "23 only".
3 1) Turn off the power to the monitor.
2) Paste two rubber feet on the bottom of the monitor.B
3) Place monitor face down on a non-abrasive surface.
NOTE: Handle with care when placing monitor face down to avoid
damaging the front control keys.Put the upper hooks of the stand in the
slot of the monitor then push stand into monitor in direction of the arrow
as shown and conrm that the stand is locked. Open the stand with
widely extended until feeling a "click" feeling.
To reattach the stand, please refer to monitor's user's manual.
Before using:
Use this stand with widely extended until feeling a "click" feeling.
CAUTION: Improper setting may cause the monitor fall down and make serious damage to the monitor.
Human Sensor position is below as normal stand. Please make sure there is no object in front of Human Sensor.
Be sure to observe the cautions described in the monitor's operating manual when handling the monitor.
For EX201W
For EX231W / EX231Wp
Unità: mm
Peso: ??
Peso: ??
Installing stand:
You use this stand for both size 20" (EX201W) and 23" (EX231W/EX231Wp)
by change attachment foot.
CAUTION: Do not use this stand for EX201W with attachment foot for
EX231W/EX231Wp. It may cause monitor fall down and make serious
damage to the monitor.
For EX201W user: Proceed to step 3.
For EX231W or EX231Wp user: Change attachment foot following the below
instruction.
1 Press Quick Release Button and pull out the attachment foot.A
2 Attach the attachment foot with "23 only".
3 1) Turn off the power to the monitor.
2) Paste two rubber feet on the bottom of the monitor.B
3) Place monitor face down on a non-abrasive surface.
NOTE: Handle with care when placing monitor face down to avoid
damaging the front control keys.Put the upper hooks of the stand in the
slot of the monitor then push stand into monitor in direction of the arrow
as shown and conrm that the stand is locked. Open the stand with
widely extended until feeling a "click" feeling.
To reattach the stand, please refer to monitor's user's manual.
Before using:
Use this stand with widely extended until feeling a "click" feeling.
CAUTION: Improper setting may cause the monitor fall down and make serious damage to the monitor.
Human Sensor position is below as normal stand. Please make sure there is no object in front of Human Sensor.
Be sure to observe the cautions described in the monitor's operating manual when handling the monitor.
For EX201W
For EX231W / EX231Wp
单位 : mm
重量 : ??
重量 : ??
Weight: ?? Weight: ??
単位 : mm
Produktspezifikationen
| Marke: | NEC |
| Kategorie: | Flachbildschirmunterstützung |
| Modell: | ST-EX2023 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit NEC ST-EX2023 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Flachbildschirmunterstützung NEC
4 März 2024
17 Februar 2024
10 Januar 2024
18 Oktober 2022
Bedienungsanleitung Flachbildschirmunterstützung
- Flachbildschirmunterstützung BenQ
- Flachbildschirmunterstützung HP
- Flachbildschirmunterstützung Manhattan
- Flachbildschirmunterstützung Yamaha
- Flachbildschirmunterstützung Hitachi
- Flachbildschirmunterstützung Icy Box
- Flachbildschirmunterstützung Techly
- Flachbildschirmunterstützung Vogel's
- Flachbildschirmunterstützung Monoprice
- Flachbildschirmunterstützung Sanus
- Flachbildschirmunterstützung B-Tech
- Flachbildschirmunterstützung Barkan
- Flachbildschirmunterstützung Ergotron
- Flachbildschirmunterstützung NewStar
- Flachbildschirmunterstützung Reflecta
- Flachbildschirmunterstützung Peerless
- Flachbildschirmunterstützung Chief
- Flachbildschirmunterstützung StarTech.com
- Flachbildschirmunterstützung Atdec
- Flachbildschirmunterstützung Premier Mounts
- Flachbildschirmunterstützung Acme United
- Flachbildschirmunterstützung Unicol
- Flachbildschirmunterstützung Bell'O
- Flachbildschirmunterstützung Dataflex
Neueste Bedienungsanleitung für -Kategorien-
20 August 2024
18 August 2024
11 August 2024
17 April 2024
17 April 2024
14 April 2024
13 April 2024
13 April 2024
10 April 2024
8 April 2024