NEC LT75z Bedienungsanleitung

NEC Videostrahl LT75z

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für NEC LT75z (40 Seiten) in der Kategorie Videostrahl. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/40

Micro-Portable Projector

LT75Z

User’s Manual

English

Deutsch

Français

Italiano

Español

Svenska

E-2

IMPORTANT INFORMATION

• IBM is a registered trademark of International Business Machines Corporation.

• Macintosh and PowerBook are registered trademarks of Apple Computer, Inc.

• Other product and company names mentioned in this user's manual may be the trademarks of their respective holders.

Precautions

Please read this manual carefully before using your NEC LT75Z

Projector and keep the manual handy for future reference.

Your serial number is located on the bottom of your LT75Z.

Record it here:

CAUTION

To turn off main power, be sure to remove the

plug from power outlet.

The power outlet socket should be installed

as near to the equipment as possible, and

should be easily accessible.

CAUTION

TO PREVENT SHOCK, DO NOT OPEN THE

CABINET.

NO USER-SERVICEABLE PARTS INSIDE. RE-

FER SERVICING TO QUALIFIED NEC SER-

VICE PERSONNEL.

This symbol warns the user that uninsulated volt-

age within the unit may be sucient to cause

electrical shock. Therefore, it is dangerous to

make any kind of contact with any part inside of

the unit.

This symbol alerts the user that important infor-

mation concerning the operation and mainte-

nance of this unit has been provided. The infor-

mation should be read carefully to avoid prob-

lems.

WARNING

TO PREVENT FIRE OR SHOCK, DO NOT EXPOSE THIS

UNIT TO RAIN OR MOISTURE.

DO NOT USE THIS UNIT’S GROUNDED PLUG WITH AN

EXTENSION CORD OR IN AN OUTLET UNLESS ALL

THREE PRONGS CAN BE FULLY INSERTED.

DO NOT OPEN THE CABINET. THERE ARE HIGH-VOLT-

AGE COMPONENTS INSIDE. ALL SERVICING MUST BE

DONE BY QUALIFIED NEC SERVICE PERSONNEL.

DOC Compliance Notice

This Class B digital apparatus meets all requirements of the

Canadian Interference-Causing Equipment Regulations.

3. GSGV Acoustic Noise Information Ordinance:

The sound pressure level is less than 70 dB (A) according to

ISO 3744 or ISO 7779.

RF Interference

WARNING

The Federal Communications Commission does not al-

low any modifications or changes to the unit EXCEPT

those specied by NEC Technologies in this manual.

Failure to comply with this government regulation could

void your right to operate this equipment.

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interfer-

ence in a residential installation. This equipment gen-

erates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation. If

this equipment does cause harmful interference to ra-

dio or television reception, which can be determined

by turning the equipment o and on, the user is en-

couraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit dif-

ferent from that to which the receiver is connected.

• Consult the dealer or an experienced radio / TV tech-

nician for help.

In UK, a BS approved power cable with moulded plug has a

Black (ve Amps) fuse installed for use with this equipment. If

a power cable is not supplied with this equipment please con-

tact your supplier.

E-3

Important Safeguards

These safety instructions are to ensure the long life of your

projector and to prevent fire and shock. Please read them care-

fully and heed all warnings.

Installation

1. For best results, use your projector in a darkened room.

2. Place the projector on a flat, level surface in a dry area away

from dust and moisture.

3. Do not place your projector in direct sunlight, near heaters

or heat radiating appliances.

4. Exposure to direct sunlight, smoke or steam can harm inter-

nal components.

5. Handle your projector carefully. Dropping or jarring can dam-

age internal components.

6. Do not place heavy objects on top of the projector.

7. If you wish to have the projector installed on the ceiling:

a. Do not attempt to install the projector yourself.

b. The projector must be installed by qualied technicians in order

to ensure proper operation and reduce the risk of bodily injury.

c. In addition, the ceiling must be strong enough to support the

projector and the installation must be in accordance with any

local building codes.

d. Please consult your dealer for more information.

Power Supply

1. The projector is designed to operate on a power supply of

100-120 or 200-240 V 50/60 Hz AC. Ensure that your power

supply ts this requirement before attempting to use your

projector.

2. Handle the power cable carefully and avoid excessive bend-

ing. A damaged cord can cause electric shock or re.

3. If the projector is not to be used for an extended period of

time, disconnect the plug from the power outlet.

Cleaning

1. Unplug the projector before cleaning.

2. Clean the cabinet periodically with a damp cloth. If heavily

soiled, use a mild detergent. Never use strong detergents or

solvents such as alcohol or thinner.

3. Use a blower or lens paper to clean the lens, and be careful

not to scratch or mar the lens.

CAUTION

Do not turn o the main power or unplug the power

cable from the wall outlet under any one of the follow-

ing circumstances. Doing so can cause damage to the

projector:

• Immediately after the power cable is plugged into the

wall outlet (when the POWER indicator has not

changed to a steady orange glow).

• Immediately after the cooling fan stops working (The

cooling fan continues to work for 90 seconds after

the projector is turned o with the POWER button).

Produktspezifikationen

Marke:	NEC
Kategorie:	Videostrahl
Modell:	LT75z
Lampentyp:	NSH
Lampenlebensdauer:	1000 h
Blitzeistung:	135 W
Kompatibilität:	LT75/150Z/LT51
Markenkompatibilität:	NEC