Naxa NAS3041 Bedienungsanleitung

Naxa KFZ-Halterung NAS3041

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Naxa NAS3041 (1 Seiten) in der Kategorie KFZ-Halterung. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/1

NAS-3041

- To skip to the next track, press the right "+/>>" buon once.

- To return to the previous, press the le  "<</-" bu on once.

- To pause playback, press the "Play/Pause" buon found on the top of the

speaker once.

- If you receive a call during music playback, you may press the "Play/Pause"

buon to answer/end the call. Music playback will pause when you receive

a call, and will resume automa cally when the call ends.

PORTABLE SPEAKER & SPEAKERPHONE WITH WIRELESS

BLUETOOTH® TECHNOLOGY

- Do not play music at excessive volume levels as this may damage your hearing

and/or equipment.

- Do not use outdoors in wet or damp environments. Do not use this product

near water (e.g., near a bath tub, washbowl, kitchen sink, laundry tub, in

wet basements, or near a swimming pool and the like).

If you have problems with your speaker, please consult the instruc ons in 

this manual, as well as the latest news, alerts, and documentaon which can

be found by vising us on the web at www.naxa.com. If you need further

assistance, please contact Naxa Technical Support.

NAXA Technical Support

2320 East 49th St.

Vernon, CA 90058

hp://www.naxa.com/naxa_support/

Remove product from packaging. Read instrucons carefully before using

the product and retain them for future reference. Retain the packaging to

store the product, or dispose of (or recycle it) safely and properly.

Set the power switch on the boom of the speaker to the "ON" posion.

Wait 2-3 seconds un l the LED light ashes red and blue. The speaker is ﬂ

now ready to be paired with another device.

Note: The speaker will remain in pairing mode for 1 minute. To place the

unit in pairing mode again, simply turn the speaker o and then on again ﬀ

using the switch on the boom of the unit.

Your wireless speaker can stream audio from any Bluetooth-enabled device

within 10m (33 feet). Simply follow the steps below:

- Turn the speaker on to place it in Pairing mode (see secon above).

- Set your phone, tablet or other device to search for Bluetooth devices (i.e.,

the speaker).

- When the speaker is found (NAS-3041), select it from the list.

- When the pairing process is complete, the LED will light a steady blue.

- To answer a call on the speaker, press the "Play/Pause" buon on the top

of the speaker. During the call, speak normally; your voice will be picked up

through the built-in microphone.

- To end a call on the speaker, press the "Play/Pause" bu on found on the 

top of the speaker.

- You may also answer/end calls by using your phone as you would normally.

- To increase the volume, press and hold the right "+/>>" bu on found on 

the front of the speaker.

- To decrease the volume, press and hold the le "<</-" bu on found on the

front of the speaker.

Place speaker in Bluetooth Pairing mode -

Pairing a Bluetooth device with your speaker -

Taking calls on your speaker (when connected to a phone) -

Controlling music playback when connected via Bluetooth -

Portable speaker unit

USB charging cable

Stream audio wirelessly from Bluetooth devices (or connect via a 3.5mm

audio jack)

Answer and make calls with the built-in microphone (requires connecon

with a cellular phone)

Delivers deep, rich sound from a portable and compact design

Built-in baery can be recharged over USB

For your safety

Speci onsﬁcaƟ

Produktspezifikationen

Marke:	Naxa
Kategorie:	KFZ-Halterung
Modell:	NAS3041
Unterstützte Audioformate:	MP3
WLAN:	Nein
Bluetooth:	Ja
Akku-/Batteriekapazität:	500 mAh
Breite:	76.4 mm
Tiefe:	76.4 mm
Gewicht:	204.11 g
Mitgelieferte Kabel:	AUX, USB
Produkttyp:	Tragbarer Stereo-Lautsprecher
Empfohlene Nutzung:	Universal
Produktfarbe:	Schwarz
3,5-mm-Anschluss:	Ja
Übertragungstechnik:	Verkabelt & Kabellos
Akkuladezeit:	2 h
Höhe:	95.5 mm
Energiequelle:	Akku
RMS-Leistung:	3 W
AUX-Eingang:	Ja
Lautstärkeregler:	Digital
Betriebsanleitung:	Ja
Anzahl der Lautsprecher:	1
Audio Kanäle:	- Kanäle
Anzahl unterstützter Akkus/Batterien:	1
Frequenzbereich:	100 - 20000 Hz
USB-Ladeport:	Ja
Produktdesign:	Zylinder
Ein-/Ausschalter:	Ja
Akku-/Batteriespannung:	5 V
Mikrofon-Eingang:	Ja
Kompatible Speicherkarten:	MicroSD (TransFlash)
Integrierter Kartenleser:	Ja
Bluethooth-Reichweite:	9.1 m