Natec Kangaroo Dual Bedienungsanleitung

Natec Ladestation/Dockingstation Kangaroo Dual

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Natec Kangaroo Dual (12 Seiten) in der Kategorie Ladestation/Dockingstation. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/12
KANGAROO DUAL
User Manual
PRODUCT FEATURES:
• Supports USB 3.0 with UASP up to 6Gbps
• Supports 2.5’’&3.5’’SATA I/II/III HDD or SSD
• Supports capacity 2x4TB or above
• Supports One Touch Backup or Duplicate
(OTB need software to support with PC connected,
Clone no need software to support without PC.)
• LED indicates power and data access and progress
• Supports plug & play
• Powered AC 100~240V 50~60Hz 0.8A,
DC 12V2.5A
PACKAGE CONTENTS:
• HDD Docking Station
• USB 3.0 cable
• User’s manual
• Power adapter(12V/2.5A)
HARDWARE SETUP:
Note: Images are for example only. Actual positions of switches or connectors and pieces may vary
depending on the model.
SYSTEM REQUIREMENTS:
• USB 3.0 port or USB 2.0 port (if the device is
connected to an USB 2.0 port, the transfer speed will
down to 480Mbps)
• Windows 2000 / XP / Vista / Win7 / Win8 / Win10 /
Mac OS 10.X or above (No driver installation needed)
•
OTB function does not work under Windows 98 and Mac.
Thank you for purchasing our Natec Kangaroo Dual USB 3.0 HDD Docking Station.
For your safety and the satisfaction of using this product, please read this manual carefully before
installation.
USER MANUAL
Natec Kangaroo Dual USB 3.0
HDD Docking Station
HDD-A (Source)
HDD-B (Target)
CLONE button
EN PL
EN PL
Duplicator (CLONE) Mode
This section will introduce how to clone a hard disk without the need of a PC.
Note! The Duplicator Mode only works when the docking station is NOT connected to a PC via the USB
cable.
For clone function, you need two hard drives:
Source Disk: drive with the data you want to duplicate (clone).
Destination Disk: in which you want to store the data of the source disk.
Attention: The capacity of the destination disk should be equal or larger than the source disk.
Begin to duplicate
1. Make sure that those hard drives have no bad sectors. Bad sectors will cause unpredictable problems.
2. Put the Source Disk into the A bay, then put the Destination Disk into the B bay.
Please make sure that those hard drives are correctly and firmly connected to SATA connectors of the
docking station.
3. Connect the power adapter to the docking station and power outlet.
4. Press the power button to power up the docking station.
5. Wait at least 10s till the docking station is prepared.
Caution! All data on your Destination HD will be lost. If you have important data on the HD, please back up
the data before beginning the Clone operation.
6. Keep pressing the Clone button for 3 seconds to begin duplication.
During the Clone process, those LED indicators will flash to show the percentage of the progress.
Begin Clone process: four LED flash one by one.
One LED stays solid: 25%
Two LED stays solid: 50%
Three LED stays solid: 75%
Four LED stays solid: 100%
When the four LED all stay solid, the process of the Clone had been finished.
7. When the process of the Clone is finished, please press the power button on turn off the docking station.
Please take out those hard drives carefully because they may be very hot.
Note!
• Those hard drives may become hot during the Clone process.
• The Clone process may take various hours to finish.

Produktspezifikationen

Marke: Natec
Kategorie: Ladestation/Dockingstation
Modell: Kangaroo Dual

Brauchst du Hilfe?

Wenn Sie Hilfe mit Natec Kangaroo Dual benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Ladestation/Dockingstation Natec

Natec

Natec Kangaroo Dual Bedienungsanleitung

17 August 2024

Bedienungsanleitung Ladestation/Dockingstation

Neueste Bedienungsanleitung für -Kategorien-

Polk

Polk BOOM Bit Bedienungsanleitung

16 Oktober 2024
Vorago

Vorago KSP-600 Bedienungsanleitung

8 Oktober 2024
IDance

IDance Mini Blaster 2L Bedienungsanleitung

7 Oktober 2024
Jam

Jam Splash Bedienungsanleitung

5 Oktober 2024
Jam

Jam Thrill HX-P320 Bedienungsanleitung

4 Oktober 2024
Aukey

Aukey SK-S1 Bedienungsanleitung

3 Oktober 2024
Rapoo

Rapoo A500 Bedienungsanleitung

2 Oktober 2024
Gembird

Gembird DD-U3M2 Bedienungsanleitung

1 Oktober 2024
Urban Factory

Urban Factory HCS02UF Bedienungsanleitung

1 Oktober 2024
Urban Factory

Urban Factory HCS01UF Bedienungsanleitung

1 Oktober 2024