Naim NAT05 XS Bedienungsanleitung

Naim Tuner NAT05 XS

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Naim NAT05 XS (34 Seiten) in der Kategorie Tuner. Dieser Bedienungsanleitung war für 28 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/34

R E F E R E N C E M A N U A L

N A T 0 5 X S F M T U N E R

E N G L I S H , D E U T S C H , F R A N Ç A I S , I T A L I A N O

Page Section

E1 1 Connections

E1 2 Mains Power

E2 3 General Installation

E3 4 NAT05 XS Installation

E4 5 NAT05 XS Operation

E5 6 NARCOM 4 Remote Handset

E6 7 NAT05 XS Connections

E6 8 NAT05 XS Specification

E6 9 Declaration of Conformity

Contents

SAFETY INSTRUCTIONS

In order to comply with current European safety regulations

it is essential that the Naim loudspeaker connectors

supplied with amplifiers and loudspeakers are used.

Do not under any circumstances allow anyone to modify

your Naim equipment without first checking with the

factory, your retailer, or your distributor. Unauthorised

modifications will invalidate your guarantee.

Equipment must not be exposed to dripping or splashing

and no objects filled with liquid, such as vases, should be

placed on the equipment.

Batteries (battery pack or batteries installed) shall not be

exposed to excessive heat such as sunshine, fire or the like.

For your own safety do not under any circumstances open

Naim equipment without first disconnecting it from the

mains.

Warning: an apparatus with CLASS I construction shall be

connected to a mains socket outlet with a protective

earthing connection.

Where the mains plug or an appliance coupler is used as

the disconnect device, the disconnect device shall remain

readily operable. To disconnect the equipment from the

mains remove the mains plug from the mains outlet.

The following label is attached to all mains powered

equipment:

W A R N I N G

THIS APPARATUS

MUST BE EARTHED

Products that display the crossed-out wheeled bin logo

cannot be disposed of as domestic waste. These products

must be disposed of at facilities capable of re-cycling them

and appropriately handling any waste byproducts. Contact

your local authority for details of the nearest such

facility. Appropriate recycling and waste disposal

helps conserve resources and protects the

environment from contamination.

Naim products are conceived with performance as the top priority. Careful

installation will help ensure that their full potential is achieved. This manual covers the

NAT05 XS FM tuner. It begins with some general installation notes and statutory safety

warnings. Product specific information begins in Section 4.

Introduction

1 Connections

It is important for both safety and performance that

any standard cables supplied are not modified.

1.1 Analogue Audio Interconnect Cables

If options are available with your equipment and

installation, DIN interconnect sockets should be used in

preference to phono sockets. One end of each Naim

audio interconnect cable is marked with a band to

establish its correct orientation. The band denotes the

end that connects to the signal source. Naim Hi-Line

interconnect cables will provide the best results.

Audio interconnect plugs and sockets should be kept

clean and free from corrosion. The easiest way to clean

them is to switch off the equipment, pull the plugs out

of their sockets, and push them back in again. Contact

cleaners and “enhancers” should not be used as the film

they deposit may degrade the sound.

2 Mains Power

Where fused plugs are used 13 amp fuses should be

fitted. Fuses of a lower rating will fail after a period

of use. Do not wire voltage dependent resistors or

noise suppressors into mains plugs. They degrade the

mains supply and the sound.

2.1 Mains Plug Wiring

In some territories a mains plug may need to be fitted

to the supplied mains lead. As the colours of the wires in

the mains lead may not correspond with the coloured

markings identifying the terminals in the plug proceed as

follows:

The wire coloured must be GREEN-AND-YELLOW

connected to the terminal in the plug marked by the

letter or by the safety earth symbol or coloured or E GREEN

GREEN YELLOWand .

The wire coloured must be connected to the terminal BLUE

in the plug marked with the letter or coloured .N BLACK

The wire coloured must be connected to the BROWN

terminal in the plug marked with the letter or coloured L

RED.

2.2 Equipment Fuses

Mains powered Naim equipment is fitted with a mains

fuse on the rear panel adjacent to the mains input socket.

Replace it if necessary only with the spare fuse supplied or

with an identical fuse. Repeated failure of the fuse points

to a fault that should be investigated by your retailer or

Naim itself.

2.3 Non- rewirable M a ins Plugs

If a non-rewirable plug is cut from a mains lead (for

whatever purpose) the plug MUST be disposed of in a way

to render it totally useless. Considerable shock hazard exists

if the cut-off plug is inserted into a mains outlet.

2.4 Mains Circuits and Cables

A hi-fi system usually shares a mains circuit with other

household equipment, some of which can cause distortion

of the mains waveform. This distortion can in turn lead to

mechanical hum from mains transformers. Some Naim

transformers are large in size, making them relatively

sensitive to such distortion, and it may be necessary

to take account of transformer hum when siting your

equipment.

Transformer hum is not transmitted through the speakers

and has no effect on the performance of the system;

however, a separate mains circuit may reduce it. Such

a circuit (ideally with a 30 or 45 Amp rating) will also

generally improve system performance. Advice on the

installation of a separate mains circuit should be sought

from a qualified electrician.

Only use either the mains cable and plugs supplied or a

Naim Power-Line mains cable.

Produktspezifikationen

Marke:	Naim
Kategorie:	Tuner
Modell:	NAT05 XS
Breite:	432 mm
Tiefe:	301 mm
Gewicht:	5500 g
Produktfarbe:	Schwarz
Höhe:	70 mm
Unterstützte Bänder:	FM
Digitales UKW-Radio:	87.5 - 108 MHz
Rauschverhältnis (SNR):	67 dB
Frequenzbereich:	12 - 15000 Hz
Fernedienungs-Eingang:	1