Mutable Instruments Rings Bedienungsanleitung

Mutable Instruments Nicht kategorisiert Rings

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Mutable Instruments Rings (3 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 28 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/3
Rings
Resonator
Front panel
Controls
A. Polyphony setting. Selects between monophonic,
duophonic or quadriphonic operation.
B. Modal, sympathetic strings or Resonator type.
non-linear/inharmonic string.
C. Coarse frequency. Quantized in semitones when a
cable is patched in the input.V/OCT (3)
D. Harmonic structure. Frequency ratio between the
partials of the modal resonator, detuning of the sym-
pathetic strings, or non-linearity/inharmonicity of the
string.
E. . Adjusts the level of higher harmonics in Brightness
the signal, by the simultaneous action of a low-pass fil-
ter on the exciter signal (closed at 8 o’clock, fully open at
12 o’clock), and of the damping filter (or Q factor of the
higher modes) on the rest of the course of the potenti-
ometer.
F. . Controls the decay time of the sound.Damping
G. . Controls on which point of the Excitation position
string/surface the excitation is applied. This setting will
remind you of the PWM control of a square oscillator –
or of the comb-filtering effect of a phaser.
H. for the CV inputs.Attenuverters
Inputs and outputs
1. Resonator parameters CV inputs. Note that the
FREQUENCY CV input is normalized to a small constant
voltage, allowing its attenuverter to be used as a fine
frequency control when no patch cable is inserted.
2. , for polyphonic operation. Strumming trigger input
Whenever a trigger is received on this input, the module
freezes the currently playing voice, lets it decay, and
starts a note on the next voice. This input is normalized
to a step detector on the input and a transient V/OCT
detector on the input.IN
3. . Controls the main frequency of the V/Octave CV input
resonator.
4. for the excitation signal. Modular levels Audio input
are expected! This input is normalized to a pulse/burst
generator that reacts to note changes on the V/OCT CV
input or triggers on the input.STRUM
5, 6. In monophonic mode, Odd and even audio outputs.
these two outputs carry two complementary compo-
nents of the sound (odd and even numbered partials
with the modal resonator, dephased components due to
picking position and pickup placement with the string
resonators).
In polyphonic mode, they split the signal into odd and
even numbered strings/plates.
Note that you need to plug a cable in the output EVEN (6)
to actually split the two signals – otherwise they will be
mixed together and sent to .ODD (5)
1
A B
C D
2 3 4 5 6
GE
H
F
About Rings
Rings is a resonator, the essential ingredient at the heart
of several physical modeling synthesis techniques. The
resonator transforms an external, unpitched excitation
audio signal into a full-bodied pitched sound. is Rings
the bar, the tube or the bunch of strings you cause to
vibrate with a bursty external signal.
Installation
Rings requires a power supply (2x5 pin -12V / +12V
connector). The red stripe of the ribbon cable (-12V side)
must be oriented on the same side as the “Red stripe”
marking on the board. The module draws from the 5mA
-12V 120mA rail and from the rail.+12V
Online manual and help
The full manual can be found online at
mutable-instruments.net/modules/rings/manual
For help and discussions, head to
mutable-instruments.net/forum
Resonator types
Modal resonator
The principle of modal synthesis is to simulate the
phenomena of resonance at play in vibrating structures
(such as bars, plates or strings) which are described by
a set of modes.
Each mode corresponds to a harmonic or partial in the
spectrum of the sound, and is modeled by a band-pass
filter. The Q factor of the filter determines how sustained
the oscillations of the corresponding partial are.
Various materials or structures are characterized by
different relationships between the frequencies of their
modes, which recreates.Rings
Sympathetic strings
String instruments such as the sitar or sarod make use
of strings that are not directly struck or plucked by the
musician, but that simply respond to the vibration of the
other strings, and add extra overtones or undertones to
their sound.
Rings simulates this phenomenon with a bunch of
virtual strings (synthesized with comb filters), allowing
the addition of extra tones to an audio signal. The tuning
ratio between these strings can be altered.
Non-linear/inharmonic strings
This is an extended version of the Karplus-Strong recipe
with potatoes and onions (tuned comb filter, absorption
filter), but also chili powder and coriander (non-lineari-
ties and dispersion all-pass filter).
Polyphony and “strumming”
Rings’ polyphony can be set to one, two, or four notes.
Enabling four-note polyphony doesn’t mean that four
CV input jacks will magically appear on the module, but
simply that four notes played in sequence will nicely
overlap without cutting each other’s tails.
To play chords, you will need to “strum” the module by
playing a rapid sequence of notes.
Making the right connections
Ideally, would need three input signals:Rings
• A trigger signal in the input, to indicate STRUM
when the currently playing note should fade away,
and when a new note is starting.
• A CV signal in the V/OCT input, to control the note
frequency.
• An audio signal in the input, which will hit, strike IN
or caress the resonator.
Because it might not always be possible to get these
three signals from your system, makes the follow-Rings
ing assumptions:
(1) If no patch cable is inserted in the audio input, the IN
module will synthesize its own excitation signal whenev-
er a note is strummed. This excitation signal is either a
low-pass filtered pulse, or a burst of noise depending on
the resonator type.
(2) If no patch cable is inserted in the audio in-STRUM
put, the module will determine that a new string should
be strummed either by:
• Detecting note changes on the V/OCT input. Or:
• Detecting sharp transients of the audio signal IN
when nothing is patched in the V/OCT input.
As a result…
You can play with just the note CV signal taken Rings
from a sequencer or stepped random module. The
module will produce a suitable excitation signal inter-
nally, and will switch strings for every new note.
trigger audioCV

Produktspezifikationen

Marke: Mutable Instruments
Kategorie: Nicht kategorisiert
Modell: Rings

Brauchst du Hilfe?

Wenn Sie Hilfe mit Mutable Instruments Rings benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Nicht kategorisiert Mutable Instruments

Mutable Instruments

Mutable Instruments Rings Bedienungsanleitung

28 April 2023

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-

DAS Audio

DAS Audio AX-112-5 Bedienungsanleitung

16 Oktober 2024
Ferplast

Ferplast Ergocomfort Freetime Bedienungsanleitung

16 Oktober 2024
AEG

AEG MECK52 Bedienungsanleitung

16 Oktober 2024
Makita

Makita UR012G Bedienungsanleitung

16 Oktober 2024
Stihl

Stihl HT 70 Bedienungsanleitung

16 Oktober 2024
Ernesto

Ernesto H14270 Bedienungsanleitung

16 Oktober 2024
IFM

IFM AC901S Bedienungsanleitung

16 Oktober 2024
Nedis

Nedis RFPOM120FBK Bedienungsanleitung

16 Oktober 2024
AEG

AEG E9KLCS01 Bedienungsanleitung

16 Oktober 2024
ART

ART ProChannel II Bedienungsanleitung

16 Oktober 2024