Musical Fidelity V90-AMP Bedienungsanleitung

Musical Fidelity Empfänger V90-AMP

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Musical Fidelity V90-AMP (2 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

V90-AMP Digital Powe

V90-AMP Digital PoweV90-AMP Digital Power Am

r Am

r Amr Amplifier with 24 bit/48kHz

plifier with 24 bit/48kHz

plifier with 24 bit/48kHz plifier with 24 bit/48kHz

Asynchrono

AsynchronoAsynchronous USB DAC

us USB DAC

us USB DACus USB DAC

Instr

InstrInstructions

uctions

uctionsuctions

Introduction

Introduction Introduction

Thank you for purchasing the V90-AMP power amplifier.

It is designed to add power and drive, for example, to

multimedia listening with computers, tablets and other

similar arrangements.

We sincerely hope that it will bring you many years of

outstanding listening pleasure.

Installation Precautions

Installation Precautions Installation Precautions

Your new V90-AMP is designed and built to provide

trouble-free performance, but as with all electronic devices,

it is necessary to observe a few precautions:

Do not use the V90-AMP near water. The unit must not be

exposed to dripping or splashing liquids.

Keep the V90-AMP away from heat such as radiators. No

naked flame sources should be placed on the unit.

Product Note:

Product Note: Product Note:

This Hi-fi product has been tested to ensure that its

operation is not adversely affected by normal background

levels of Radio Frequency Interference (R.F.I.), and that it

does not itself generate excessive amounts of interference.

However, if a problem persists, please contact your Musical

Fidelity agent.

The V90-AMP will operate in accordance with its

specifications within the following environmental range:

Temperature 5 to 45 degrees Celsius

Humidity 10 to 90% non condensing

WARNING: NEVER open the case of the V90-AMP. There

WARNING: NEVER open the case of the V90-AMP. There WARNING: NEVER open the case of the V90-AMP. There

are POTENTIALLY LETHAL HIGH VOLTAGES

are POTENTIALLY LETHAL HIGH VOLTAGES are POTENTIALLY LETHAL HIGH VOLTAGES

CONTAINED within this unit even on standby or switched

CONTAINED within this unit even on standby or switched CONTAINED within this unit even on standby or switched

off. There are no user adjustments inside. Please refer all

off. There are no user adjustments inside. Please refer all off. There are no user adjustments inside. Please refer all

service work to an authorised Musical Fidelity agent.

service work to an authorised Musical Fidelity agent.service work to an authorised Musical Fidelity agent.

Unauthorized acces

Unauthorized accesUnauthorized access also invalidates all

s also invalidates all

s also invalidates alls also invalidates all guarantees.

guarantees.

guarantees. guarantees.

Connections

Connections Connections

All connections must be made before the unit is plugged in.

Always switch off the equipment attached to the V90-AMP

before connecting or disconnecting power, changing leads

or inputs.

Inputs

Inputs Inputs

Choose which inputs the unit will be using. It will switch

automatically dependant on which input is currently

“playing”.

USB

USB USB - Using a good quality USB (1.1 or 2.0) “A” to “B” lead

(not supplied), connect the USB input to a spare USB port

on computer/host device. This unit is automatically detected

in all Microsoft, Apple and Linux based computers and

similar which support “USB audio class 1.0 or later”.

Digit

DigitDigital

alal – Use a normal TOSLINK cable (not supplied) with

TOSLINK to 3.5mm adaptor (supplied) for best quality

connection from other digital audio devices.

Analogue

AnalogueAnalogue – Use standard 3.5mm Jack cable (or RCA cables

in conjunction with supplied adaptor) to connect analogue

signals from other sources.

Outputs

Outputs Outputs

Two pairs of sprung speaker terminals are provided for

connection to a pair of speakers. Use normal stranded

speaker cable and make absolutely sure there are no stray

strands that could short circuit and cause the amp to shut

down prematurely.

DC output

DC output DC output

A DC output socket is provided for future MF product only.

Power

Power Power

Plug the mains connector lead from the unit into a

convenient wall mains outlet. The blue LED will light to

confirm the unit is now on and ready for use. To turn unit off

or on again, press the volume knob.

Power LED Status LED

Power on/standby switch (press) and volume control (turn)

Async. USB input 3.5mm Analogue/Digital optical input DC output

Operation

Operation Operation

Volume function

Volume function Volume function

The unit can be used as a volume controlled amplifier or a

straight power amplifier.

To enable

enable

enableenable the front panel volume control, slide the volume

control switch (back panel) to the on

onon position. The knob on

the front panel now controls volume to speakers.

To disable

disable

disabledisable the front panel volume control, slide the volume

control switch (back panel) to the off

off

offoff position. The knob on

the front panel is now defeated and volume control will need

to be applied from within the source, for example by a

computer’s multimedia mixer settings.

Input select

Input select Input select

This unit will switch inputs automatically dependant on

signal presence or absence.

When playing (i.e. signal is present) through the USB input

takes precedence over anything plugged into the 3.5mm

Jack plug. So the unit will automatically select the USB

input.

To switch to the OPTICAL/ANALOGUE input STOP the

USB music player on the computer and/or remove the USB

input lead.

The unit will then switch to OPTICAL/ANALOGUE input

accordingly.

Selecting between analogue and optical input is simply a

matter of plugging the required lead into the

OPTICAL/ANALOGUE input and the V90-AMP is internally

configured automatically.

Status LED summary

Status LED summary Status LED summary

RED

REDRED – (temporary) mains switched off or lead disconnected.

(permanent) Internal failure – switch off and check

wiring for short circuits before switching on again.

GREEN

GREENGREEN (analogue input) analogue connection made but

not necessarily playing.

GREEN

GREENGREEN (digital/USB inputs) digital audio signal present and

playing

AMBER

AMBERAMBER (analogue) displayed briefly when plugging in

analogue cable as unit switches to analogue

input.

AMBER

AMBERAMBER (digital/USB inputs) digital connection made but no

signal being played.

Off – No sources connected or unit is switched off.

Use

Use Use

Switch unit on and adjust the volume control for a

comfortable listening level, sit back and enjoy the music.

Volume control off/on Right and left speaker output terminals Mains power input socket

Units 24-26 Fulton Road

Wembley HA9 0TF

England

(+) 44 208 8900 2866

http://www.musicalfidelity.com/

For warranty, please register product on

http://www.musicalfidelity.com/register

USB input

USB input USB input

A good quality USB A to B cable is required to connect the

unit to the computer.

Plug the B (square) end into the socket in the back of the

V90-AMP. Plug the A (rectangle) end into a free USB

socket on your computer.

Additional USB informati

Additional USB informatiAdditional USB information

onon

On the host computer, a new device will be available,

whenever the V90-AMP is plugged in. Use this device to

listen to music stored or played from this host computer.

CD, MP3, WAV files played on any software should now

play through the internal USB DAC.

This device works any device that supports USB audio

Class 1.0 or later. USB Class 1.0 “drivers” are supplied with

operating systems such as Windows XP, VISTA, 7, 8 and

later, Apple OS-X and later and Linux kernel 2.6.33 or later.

The computer drivers for the USB input of the V90-AMP

should install automatically. If they do not, please consult

computer system adminis

computer system adminiscomputer system administrator/technical support

trator/technical support

trator/technical supporttrator/technical support.

Musical Fidelity does not supply or support any third party

or update drivers for this device.

To check correct installation follow these steps:

PC /Windows user

PC /Windows userPC /Windows users

s s

Check the computer has detected the device and is

currently using it by clicking: (most Windows versions)

- Start

- Settings

- Control panel

- Sounds and Multimedia

- Audio

Check “Musical Fidelity V90-AMP” appears under

PREFERRED AUDIO DEVICE tab.

Mac users

Mac users Mac users

Check the computer has picked up the device and is

currently using it by clicking: (MAC OS X)

- System preferences

- Hardware

- Sound

Check that “Musical Fidelity V90-AMP” is selected under

the OUTPUT tab. If the computer’s warning sounds/chimes

are to played through the internal DAC, make sure it is

selected under the SOUND EFFECTS tab too.

This device is a high speed serial data processor, and by

its nature, requires a very high volume of USB bandwidth. It

will benefit greatly from being the only device connected on

its USB ‘port’. Sharing the same port with other devices may

cause unwanted artefacts such as dropouts. This especially

includes the use of the unit on a USB hub/splitter alongside

other USB components.

With the USB cable plugged in, the internal USB DAC is

automatically recognised no matter what input is currently

selected. When INPUTS selector switch is set to USB, the

green LOCK LED will light to show that the USB DAC is

correctly setup. The green LOCK LED goes out when the

INPUTS switch is set to LINE position but the internal USB

DAC is still connected and ready to use whenever required.

Item disposal inf

Item disposal infItem disposal information for Europe

ormation for Europe

ormation for Europeormation for Europe

DISPOSAL

The crossed out wheeled bin label that appears on the back panel of

the product indicates that the product must not be disposed of as normal household

waste. To prevent possible harm to the environment please separate the product from

other waste to ensure that it can be recycled in an environmentally safe manner.

Please contact your local government office or your retailer for available collection

facilities.

DISPOSITION

La poubelle sur roulettes barrées X, qui apparaît en logo sur le panneau

arrière du produit, indique que celui-ci ne doit pas être traité comme un déchet

domestique commun. Afin de protéger l'environnement, ce produit électronique devra

être géré séparément et donc recyclé selon les nouvelles normes Européennes Rohs

concernant les déchets d'appareils électroniques. Prière de contacter les services

concernés gouvernementaux ou votre point de vente pour l'élimination et l'enlèvement

de déchets électroniques équipés de composants électroniques.

DISPOSAL

La etiqueta cruzada hacia fuera del compartimiento que aparece en el

panel trasero del producto indica que el producto no se debe reciclarse como basura

normal de la casa. Para prevenir daños posible al ambiente separe por favor el

producto de otras basura para asegurarse de que puede ser reciclada de una manera

ambientalmente segura. Entre en contacto por favor a su oficina gubernamental local

o a su minorista para las instalaciones disponibles de la colección.

RIFIUTI

L'etichetta del cassonetto barrato riportato sul retro dell'apparecchio

indica che il prodotto non deve essere smaltito tramite la procedura normale di

smaltimento dei rifiuti domestici. Per evitare eventuali danni all'ambiente, separare

questo prodotto da altri rifiuti domestici in modo che possa venire riciclato in base alle

procedure di rispetto ambientale. Per maggiori dettagli sulle aree di raccolta

disponibili, contattate l'ufficio govenativo locale od il rivenditore del prodotto.

FACHGERECHTE ENTSORGUNG:

Das auf der Geräterückseite angebrachte Label deutet darauf hin, dass

das Produkt nicht mit konventionellem Hauskehricht entsorgt werden darf. Um

Schäden und Verschmutzungen an Umwelt und Mensch zu vermeiden, muss das

Produkt fachgerecht entsorgt und von anderem Abfall getrennt werden. Wenden Sie

sich bei Fragen hierzu an Ihren Fachhändler oder an eine öffentliche

Informationsstelle.

AFVAL

Het label op de achterzijde van dit apparaat, een afvalbak op wielen met

een kruis doorgehaald, geeft aan dat dit apparaat niet samen met gewoon

huishoudafval mag worden weggegooid. Om mogelijke schade aan onze

leefomgeving te voorkomen dient dit apparaat, gescheiden van gewoon huishoudelijk

afval, te worden afgevoerd zodat het op een milieuvriendelijke manier kan worden

gerecycled. Neem voor beschikbare inzamelplaatsen contact op met uw gemeentelijke

reinigingsdienst of met uw elektronica leverancier.

HÄVITTÄMINEN

Yliruksattua jäteastiaa kuvaava tarra tuotteen takalevyssä kertoo, että

tuotetta ei saa käsitellä normaalina talousjätteenä. Ympäristön suojelemiseksi on tuote

pidettävä erillään muusta jätteestä ja se on kierrätettävä ekologisesti kestävällä

tavalla. Ota yhteyttä laitteen myyjään tai Pirkanmaan Ympäristökeskukseen lähimmän

kierrätyskeskuksen löytämiseksi.

AFSKAFNING

Logoet med en skraldespand med kryds over på bagsiden af apparatet

indikerer at dette produkt ikke må kasseres som normal husholdningsaffald. For at

forebygge mulig skade på miljøet, bedes De separere dette produkt fra andet affald, og

sikre at det bliver genbrugt på en miljørigtig måde. Kontakt venligst de lokale

myndigheder eller din forhandler for oplysning om nærmeste tilgængelige

opsamlingssted for elektronikaffald.

ΔΙΑΔΙΚΑΣΙΑ ΑΠΟΡΡΙΨΗΣ

ΤΟ ΣΗΜΑ ΜΕ ΤΟΝ ΔΙΑΓΕΓΡΑΜΜΕΝΟ ΤΡΟΧΗΛΑΤΟ ΚΑΔΟ

ΑΠΟΡΡΙΜΑΤΩΝ ΣΤΗΝ ΠΙΣΩ ΟΨΗ ΟΤΙ ΤΟΥ ΜΗΧΑΝΗΜΑΤΟΣ ΔΗΛΩΝΕΙ ΤΟ

ΠΡΟΙΟΝ ΑΥΤΟ ΔΕΝ ΠΡΕΠΕΙ ΝΑ ΔΙΑΧΕΙΡΙΣΘΕΙ ΣΑΝ ΣΥΝΗΘΙΣΜΕΝΟ ΟΙΚΙΑΚΟ

ΑΠΟΒΛΗΤΟ. ΠΡΟΣ ΑΠΟΦΥΓΗ ΕΝΔΕΧΟΜΕΝΗΣ ΕΠΙΒΑΡΥΝΣΗΣ ΤΟΥ

ΠΕΡΙΒΑΛΛΟΝΤΟΣ, ΞΕΧΩΡΙΣΤΕ ΑΠΟΡΡΙΜΑΤΑ ΤΟ ΤΑ ΠΡΟΙΟΝ ΑΠΟ ΑΛΛΑ ΩΣΤΕ

ΝΑ ΕΞΑΣΦΑΛΙΣΘΕΙ Η ΑΝΑΚΥΚΛΩΣΗ ΤΟΥ ΤΟΝ ΜΕ ΠΡΕΠΟΝΤΑ ΤΡΟΠΟ.

ΠΑΡΑΚΑΛΟΥΜΕ ΝΑ ΕΠΙΚΟΙΝΩΝΗΣΕΤΕ ΜΕ ΤΗΝ ΤΟΠΙΚΗ ΥΠΗΡΕΣΙΑ

ΑΝΑΚΥΚΛΩΣΗΣ ΚΑΤΑΣΤΗΜΑ Η ΜΕ ΤΟ ΑΓΟΡΑΣ ΓΙΑ ΠΕΡΙΣΣΟΤΕΡΕΣ

ΛΕΠΤΟΜΕΡΕΙΕΣ.

Specifications: Power 20W /channel into 8 Ohms (Suitable for

speakers 6 ohms minimum).

THD <0.1% typical ‘A’ weighted

Signal/noise ratio >85dB ‘A’ weighted

Input impedance 47KΩ

Frequency response +0, -3dB 10Hz to 20 kHz

Power requirement: 90-250Vac universal mains

Connections: Line level input: 1 stereo 3.5mm “jack” connector

Optical input 1 optical 3.5mm “jack” combined with line level input above

USB input 1 Type “B” asynchronous, 16-24 bits, up to 48kHz sample rate

Speaker outputs 2 pairs spring loaded speaker terminals

DC output For future MF product only.

Power input 3-way “cloverleaf” mains power socket

Dimensions: Length 117mm 4⅔” including terminals and volume

Width 170mm 6⅔”

Height 47mm 1⅔” including “feet”

Weight: Unit alone 710g 1⅔lbs

Total packed carton 1.38Kg 3lbs

Accessories

(supplied) Optical adaptor

Analogue adaptor

Mains lead

Leaflet

Toslink

2xRCA

3 way

V90-AMP

to 3.5mm jack

“cloverleaf”

Instructions

1 off

Musical Fidelity reserves the right to make improvements which may

result in specification or feature changes without notice. E&OE.

Manual issue 2 – 27/9/13

Basic problem-solving with an amplifier is similar to troubleshooting other electrical or electronic equipment.

Problem Probable Cause Remed

No power Mains supply not switched on.

Power plug is not fully inserted

Check mains supply is plugged in

and unit switched on (blue LED lit)

Plug into rear socket securely

No sound – analogue

No sound - USB

Wrong connections between input

source and the V90-AMP

Volume turned right down

USB device not working

Check speaker leads are

connected and secure

Check other source is not playing

and lead connections.

Check volume is adjusted

accordingly. Take care not to turn

up too high!

Check USB input lead is securely

connected.

Green LOCK LED will light when

an active digital/USB stream is

detected.

See “Additional USB Information

section” to check computer has

recognised and is using “V90-AMP

24/96” for playback.

Hum Audio connector not secure Insert plug so full contact is made.

If none of these actions affect a cure, please contact the dealer, or an authorised Musical Fidelity service agent.

Remember; never open the case of the V90-AMP, as this will invalidate the guarantee.

Produktspezifikationen

Marke:	Musical Fidelity
Kategorie:	Empfänger
Modell:	V90-AMP

Brauchst du Hilfe?

Wenn Sie Hilfe mit Musical Fidelity V90-AMP benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Empfänger Musical Fidelity

Musical Fidelity M6s PRE Bedienungsanleitung

5 September 2024

Musical Fidelity MX-HPA Bedienungsanleitung

5 September 2024

Musical Fidelity M6x 250.4/2 Bedienungsanleitung

5 September 2024

Musical Fidelity Nu-Vista 800.2 Bedienungsanleitung

5 September 2024

Musical Fidelity M6si500 Bedienungsanleitung

5 September 2024

Musical Fidelity M2si Bedienungsanleitung

5 September 2024

Musical Fidelity M6x 250.5 Bedienungsanleitung

5 September 2024

Musical Fidelity M6x 250.11 Bedienungsanleitung

5 September 2024

Musical Fidelity Nu-Vista 600 Bedienungsanleitung

4 September 2024

Musical Fidelity Nu-Vista 800 Bedienungsanleitung

3 September 2024

Bedienungsanleitung Empfänger

Neueste Bedienungsanleitung für -Kategorien-

Rotel RA‑1592MKII Bedienungsanleitung

16 Oktober 2024

Denon AVR-S900W Bedienungsanleitung

16 Oktober 2024

Pro-Ject Amp Box DS2 Bedienungsanleitung

15 Oktober 2024

AKG HP12U Bedienungsanleitung

15 Oktober 2024

Sennheiser EM 9046 SU Bedienungsanleitung

14 Oktober 2024

Yamaha MusicCast RX-V481 Bedienungsanleitung

14 Oktober 2024

JL Audio VX600/6i Bedienungsanleitung

12 Oktober 2024

Pioneer SX-303RDS Bedienungsanleitung

10 Oktober 2024

Technics SA-160L Bedienungsanleitung

8 Oktober 2024

Avantree Audiplex Bedienungsanleitung

7 Oktober 2024