Muse M-36 CM Bedienungsanleitung

Muse Hi-Fi-Anlage M-36 CM

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Muse M-36 CM (1 Seiten) in der Kategorie Hi-Fi-Anlage. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/1

M-36 CM

User Manual

MICRO SYSTEM CD/MP3 WITH USB

Please read the instruction carefully before operating the unit.

English

Auto preset

In mode, press on remote control to start automatic preset programming. FM AUTO

Radio frequencies will be browsed and radio stations stored automatically. When all

the available radio stations are stored or all memory locations are full, the auto preset

programming function will stop.

Retrieving the preset stations

In radio mode, press on remote control to access a preset station.M-/+

GB - 5

PLAY MODES(CD/MP3 ONLY)

Intro playback

Press button on remote control and “INTRO” appears on display. It will start to play INTRO

the first 10 seconds of each track. Press button again to cancel this function and INTRO

“INTRO” disappears on display.

Repeat playback

Press button on remote control repeatedly to select a play mode:REPEAT

- Repeat One : display shows “REP”.

- Repeat folder :display shows “REP ALB”. (MP3 only)

- Repeat All : display shows “REP ALL”.

To cancel repeat playback, press REPEAT button repeatedly until repeat indicator disappears.

Random playback

Press button on remote control and “RDN” appears on display. It will play all tracks RANDOM

in random order. Press button again to cancel this function and “RDN” disappears. RANDOM

Program playback

1.In stop mode, press PROG button on remote control. The display will show “P01” and ashing

“00” (“000” for MP3 ).

2.Use number buttons to input the track number and press button to conform. PROG

3.Repeat above steps to program up to 32 tracks.

4.Press to start program playback.

5.Press on remote control to stop the program playback and cancel this function. STOP

GB - 1

LOCATION OF CONTROLS

1. LED display

2. STANDBY indicator

3. Remote sensor

4. buttonSTANDBY

5. PLAY/PAUSE button

6. buttonSOURCE

7. , buttons:

Skip / search / Tuning

8. buttonsVOL+/-

9. Earphone jack

10.USB port

11. Disc door open button

12.Disc compartment

13.FM antenna

14.AC cord

15.Speaker terminals

16.Speaker box

17.Speaker wire

GB - 2

R1. buttonSTANDBY

R2. button MUTE

R3. number buttons0-9,10+

R4. button : To program playback sequences.PROG

R5. buttons : Folder down /upALB-/+

R6. buttonsVOL-/+

R7. / / button: M- (MEMORY -)

Skip / search / Preset down

R8. / / button: M+ (MEMORY +)

Skip / search / Preset up

R9. PLAY/PAUSE button

R10. buttons: TuningTUN-/+

R11. buttonCD

R12. buttonUSB

R13. buttonFM

R14. button SOURCE

R15. buttonINTRO

R16. buttonREPEAT

R17. button RANDOM

R18. buttonAUTO/ STOP

R19. buttonSLEEP

R20. buttonEQ

R21. buttonMEMORY

R22. buttonST/MONO

Before throwing any batteries away, consult your distributor who may be able to

take them back for specic recycling.

REMOTE CONTROL

Installing Battery

Insert 2 “AAA/ UM4” batteries to the remote control prior to use. Make sure to match their

polarities (+/-) to the markings inside the compartment.

NOTES:

- Never recharge the batteries, apply heat to them or take them apart.

- If the remote control is not going to be used for a long time, remove the battery to avoid

damage caused by battery leakage corrosion.

- Attention should be drawn to the environmental aspects of battery disposal.

- Do not throw batteries in re!

- Battery shall not be exposed to excessive heat such as sunshine, re or the like.

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same

or equivalent type.

12 3

10+

PROG

STANDBY MUTE

ALB-

ALB+

VOL+

TUN- TUN+

VOL-

INTRO REPEAT

RANDOM

AUTO / STOP

CDUSB

URCE

SLEEP EQ MEMORY ST/MONO

R11

R15

R16

R19

R12

R10

R13

R18

R17

R14

R22

R21R20

R10

1. Press button to turn on the unit.STANDBY

2. Open the CD door by pushing the CD door Open button .

3. Place the CD with label side up inside the CD compartment and close the CD door.

4. Press or button to select CD function. The “CD” icon is displayed. After a few SOURCE CD

seconds, the total number of track and total play time will appear on display. Press to

start playback.

GB - 3

1.Press button to turn on the unit. STANDBY

2.The function is selected by pressing button repeatedly, or pressing , or SOURCE CD USB

FM button on remote control respectively.

VOLUME

Press to adjust the sound to comfortable level. The volume level will be displayed for VOL-/+

a few seconds.

MUTE

To cut off the sound from the speakers temporarily, press button on remote control. MUTE

The “MUTE” icon is shown on the display. Press button again to cancel Mute mode MUTE

and restore the sound from the speakers.

Press button on remote control to toggle among the different sound effects (FLAT /EQ

CLASSIC /ROCK /POP / JAZZ). The selection will show on display for few seconds.

DISC OPERATION

POWER SUPPLY

This set operates on AC 100-240V~ 50/60Hz.

Connect the power cord to a convenient AC wall outlet.

AUDIO CONTROLS

SPEAKER CONNECTION

1. Insert the speaker cables by pushing down the terminal lever of the Left Speaker Terminal

and the Right Speaker Terminal.

2. Connect the speaker to Speaker Terminals, with BLACK wire to BLACK terminals and

WHITE/BLACK wire to WHITE terminals.

-By number buttons , 10+ 0-9

Use the number buttons to input the track number, and it will start playback from the selected

track automatically.

If you want to input the track number bigger than 9, use the , button. 10+ 0-9

Example 1, to select the 10th track, rstly press 10+ button once. “_ _” appears on display,

then press number button & . 1 0

Example 2, to select the 25th track, rstly press 10+ button once. “_ _” appears on display,

then press number button & . )2 5

GB - 4

USB OPERATION

1. Press button to turn on the unit.STANDBY

2. Connect an USB device to the USB port on unit.

3. Press or button to select USB mode. After a few seconds, the total number SOURCE USB

of folder and track will appear on display. Press to start playback.

Notes:

- Do not put anything other than a USB device to the port of this unit. Other objects may

damage the USB mechanism.

- The USB socket must not be connected to the computer directly, for that may damage the unit.

- There are many USB devices in the market. We cannot guarantee to support all different

models. Please try another USB device if your device is not supported.

Fast search backward/forward

Press and hold / to search quickly within a track.

Select a folder (mp3 only)

•Press ALB+ on remote control to select the rst track of next folder of your current disc or USB.

•Press ALB- on remote control to select the rst track of previous folder of your current disc or USB.

RADIO

Listening to the radio

1. Press button to turn on the unit.STANDBY

2. Press or FM button to select FM Radio mode. “FM” appears on display.SOURCE

3. Tune to a desired station with / on unit or on remote control.TUN-/+

Note:

- For a better reception in FM, extend the antenna.

-If a stereo broadcast is received, “ST” is displayed. Press button on remote ST/MONO

control to switch between Mono and Stereo mode.

SLEEP FUNCTION

In sleep mode, the unit will turn off automatically after a specied time.

You can select duration in minutes before the unit turns off automatically.

1.Press button on remote control repeatedly to select 90-80-70-60-50-40-30-20-10- SLEEP

OFF. Release button. “SL” icon remains on display. SLEEP

Notes:

- Sleep time can only be set when the unit is turned ON.

- The sleep function is cancelled when “OFF” is selected, and “SL” icon disappears.

2. Press button to check the remaining sleep time.SLEEP

3.If you want to switch off the radio before sleep ends, press button.STANDBY

GB -6

Continuous use of earphones at high volume can damage the user's

hearing.

USING HEADPHONES (NOT INCLUDED)

NOTE: READ THIS IMPORTANT INFORMATION BEFORE USING YOUR HEADPHONES.

1.Avoid extended play at very high volume as it may impair your hearing.

2.If you experience ringing in your ears, reduce the volume or shut off your unit.

Power supply: AC 100-240V~ 50/60Hz

Power consumption : 20W

Speaker: 8 ohms

MAINTENANCE

Cleaning

WARNING: Disconnect the unit from the mains supply before cleaning.

- Use a soft, dry, clean cloth. Regularly dust the vents at the back or sides.

- Using solvents, abrasive or alcohol-based products risks damaging the appliance.

-If an object or liquid enters inside the appliance, unplug it immediately and have it checked

by an authorized engineer.

Notes on disc

* Do not use irregular shape CDs (example: heart-shaped, octagonal ones). It may result in

malfunctions.

* Do not place more than one disc in the disc compartment.

* Do not try to open the disc compartment during playing.

* Do not touch the lens. Doing so may cause malfunction.

*If there is a scratch, dirt or fingerprints on the disc, it may cause tracking error. Before

playing, clean the disc with a cleaning cloth. Wipe the disc from the center out. Don't store

discs in places with high temperatures or high humidity, they can become warped. After

playing, store the disc in its case.

Important Note

• Before transporting the unit, remove the disc from the disc compartment.

SPECIFICATION

MORE INFORMATION

CAUTION: To reduce the risk of electric shock, do not remove the

cover (or back). There are no user serviceable parts inside the unit.

Refer all servicing to qualify personnel.

The lightening flash with arrowhead symbol within the triangle is a warning sign

alerting the user of “ dangerous voltage” inside the unit.

The exclamation point within the triangle is a warning sign alerting the user of

important instructions accompanying the product.

WARNI NG: TO PRE VE NT FIRE O R SHOCK HAZARD, DO NO T EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

GB -7

IMPORTANT!

- The ventilation should not be impeded by covering the ventilation openings with items such

as newspapers, table-cloths, curtains, etc.

- No naked ame sources, such as lighted candles, should be placed on the apparatus.

- The use of apparatus in moderate climates.

- The apparatus should not be exposed to dripping or splashing.

- Ensure a minimum distance of 5cm around the apparatus for sufcient ventilation.

- Do not place objects lled with liquids, such as vases, on the apparatus.

- The marking plate is located on the back of unit.

- Mains plug is used as the disconnect device and it shall remain readily operable. To

be completely disconnected the power input, the mains plug of the apparatus shall be

disconnected from the mains completely. The mains plug should not be obstructed or should

be easily accessed during intended use.

- Under the inuence of electrical fast transient or/and electrostatic phenomenon, the product

may malfunction and require user to power reset.

- Excessive sound pressure from earphones and headphones can cause hearing loss.

CAUTION: Invisible laser radiation when open and interlocks defeated. Avoid exposure to

beam. Class 1 laser product.

If at any time in the future you should need to dispose of this product please note

that Waste electrical products should not be disposed of with household waste.

Please recycle where facilities exist. Check with your Local Authority or retailer for

recycling advice.(Waste Electrical and Electronic Equipment Directive).

Note: Design and specication are subject to change without notice.

Inserting the plug of your headphones into the headphone jack will enable you to listen in

private. When using headphones, the speaker will be disconnected.

16 16

1315 14

109

Presetting radio stations

The unit can store up to 20 FM stations in its memory.

Manual preset

1. Tune to a desired station.

2. Press MEMORY button on remote control. “01” ashes on display.

3. Press on remote control to select a desired preset location. Press again to M-/+ MEMORY

save the radio station as the selected preset station.

4. Repeat above steps to preset a maximum of 20 stations.

BASIC OPERATION

Play/pause

Press to pause playback. Press again to resume.

Select a track

-By /

Press / to select a track.

3.Keep the volume at a reasonable level even if your headset is an open-air type designed

to allow you to hear outside sounds. Please note that excessively high volume may still block

outside sounds.

Push Speaker terminal tab down to insert wire.

Release tab to lock wire in the terminal.

HX-3187 IB MUSE 001 REV0 -GB.ind1 1 2012-1-31 15:14:21

Produktspezifikationen

Marke:	Muse
Kategorie:	Hi-Fi-Anlage
Modell:	M-36 CM

Brauchst du Hilfe?

Wenn Sie Hilfe mit Muse M-36 CM benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Hi-Fi-Anlage Muse

Muse M-630 DWT Bedienungsanleitung

3 September 2024

Muse M-380 GBS Bedienungsanleitung

26 August 2024

Muse M-380 GB Bedienungsanleitung

26 August 2024

Muse M-880 BTC Bedienungsanleitung

15 August 2024

Muse M-30 BTB Bedienungsanleitung

8 August 2024

Muse MD-203 KB Bedienungsanleitung

5 August 2024

Muse M-70 DBT Bedienungsanleitung

2 August 2024

Muse M-620 BT Bedienungsanleitung

2 August 2024

Muse M-33 OP Bedienungsanleitung

31 Juli 2024

Muse M-32 CM Bedienungsanleitung

29 Juli 2024

Bedienungsanleitung Hi-Fi-Anlage

Neueste Bedienungsanleitung für -Kategorien-

Lenco MC-129 MP3 Bedienungsanleitung

16 Oktober 2024

Akai EIE Pro Bedienungsanleitung

14 Oktober 2024

Sennheiser SZI 1029 Bedienungsanleitung

7 Oktober 2024

Yamaha MusicCast SRT-1500 Bedienungsanleitung

7 Oktober 2024

Kicker 46HDTPH Bedienungsanleitung

7 Oktober 2024

Vtech V-Kids Bedienungsanleitung

5 Oktober 2024

Hitachi AX-M10E Bedienungsanleitung

5 Oktober 2024

IDance XD8N Bedienungsanleitung

5 Oktober 2024

LD Systems DAVE 18 G3 Bedienungsanleitung

4 Oktober 2024

Pyle Pro PWMA1216BM Bedienungsanleitung

4 Oktober 2024