Mtx Audio TH904 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Mtx Audio TH904 (44 Seiten) in der Kategorie Autoradio. Dieser Bedienungsanleitung war für 40 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/44
TH904
4 Channel Class-AB Power Amplier
600W
RMS
Designed by MTX in Phoenix, USA
www.mtx.eu.com
www.mtx.com
www.mtx.com - www.mtx.eu.com
Introduction
Thank you for purchasing an MTX Audio Hi-Performance amplier. Proper installation matched with MTX speak-
ers and subwoofers provide superior sound and performance for endless hours of waking the neighbors, slam-
min' your friends or at out stomping wanna-be players. Congrats and enjoy the ultimate audio experience with
MTX !
Specications :
• 4-Channel Class-AB amplier
• CEA2006 certied Power Output :
- 150 watts RMS x 4-channels at 2 ohm and THD+N ≤1%
- 90 watts RMS x 4-channels at 4 ohm and THD+N ≤1%
- 300 watts RMS x 2-channels at 4 ohm and THD+N ≤1%
• Crossover :
- High pass 12dB/oct variable from 40Hz to 8000Hz
- Low pass 12dB/oct variable from 40Hz to 8000Hz
- Band pass 12dB/oct variable from 40Hz to 8000Hz
• Signal-to-Noise Ratio (1 watt) : > 81dB
• THD+Noise (Distortion) (1 watt) : ≤ 0,25%
• Frequency Response (±1dB) : 20Hz-20000Hz
• Maximum Input Signal : 6V
• Maximum Sensitivity : 100mV
• Dimensions : 383mm x 213mm x 52,5mm
• High level inputs with Smart Engage Technology
Features :
• XTC - (Xtant Technology Cooling) - A regulated thermal intercooler, injecting cool air through internal heat
sinks. Fan speed is load dependent and continuously variable, sampling the temperature of the heat sink and
transformers for maximum reliability. Intercooler exhaust is strategically placed to chill transformers and main-
tain exceptional performance at any volume level. (Cool eh ? An Amp with an Intercooler ! )
• Pure N-Channel Design - Patent N°: US05631608 and N°: US05783970 - MTX ampliers incorporate N-
Channel MOSFETs on both the positive and negative circuits of the output stage (PURE N-Channel Design). No
additional circuits are needed to compensate for inecient designs like P-Channel MOSFETs. Both the positive
and negative circuits have equal usable power ratings. Genuine Genius...Yea we know...
• EAF Technology (Ecient Auto Former) - Patent N°: US05598325 - Our Transformers are "Auto Formers"
which allows us to use smaller magnetics (-30% to -50%) yielding increased eciency. Turn ratios are improved
due to series connections between the primary and secondary taps meaning MORE Power !
• Smart Engage™ Technology - Patent N°: US06556683 - The amp switches on and o automatically when
connected with high level inputs. No need for a remote turn on wire from under the dashboard. No need to
remove the head unit. Thanks MTX !
• Bi-Level Inputs - High level inputs (Speaker cables) and line level inputs (RCA) utilize the same RCA type input
connections on the amp.
Owner’s Manual - TH904
Control Panel :
Gain Control - The gain control matches the input sensitivity of the amplier to the source unit being used. The
operating range varies from 100mv to 6V.
Adjusting the gain
1. Turn the gain control on the amplier all the way down (counter clockwise).
2. Turn up the volume control on the source unit to approximately 3⁄4 of maximum.
3. Adjust the gain control on the amplier until audible distortion occurs.
4. Adjust the gain control down until audible distortion disappears.
5. The amplier is now calibrated to the output of the source unit.
Low Pass X-Over Switch - Turns the active low pass (LP) x-over on and o. When engaged (in) the x-over is “ON”,
when disengaged (out) the x-over is “OFF”
Low Pass X-Over Frequency Control - Used to select the desired low-pass (LP) x-over frequency. The frequency is
adjustable from 40Hz to 8000Hz.
High Pass X-Over Switch - Used to turn on the active high-pass (HP) x-over on and o. When engaged (in) the
x-over is “ON”, when disengaged (out) the x-over is “OFF”.
High Pass X-Over Frequency Control - Used to select the desired high-pass (HP) x-over frequency. The frequency
is adjustable from 40Hz to 8000Hz..
Band Pass X-Over : To use, turn “ON” the HP and LP x-overs at the same time, creating a band-pass x-over for kick
woofers or midranges. You can tune the lter with frequency controls (3) and (5).
Important Notice: When both x-overs are turned “OFF”, the pre-amp section is in “Direct” mode providing the
best possible sound quality.
Power On LED - The LED illuminates red when the amp is switched on. For Short or Thermal protection, see
points 9 and 10
Control Panel (Top)
Connectors Panel (Side)


Produktspezifikationen

Marke: Mtx Audio
Kategorie: Autoradio
Modell: TH904

Brauchst du Hilfe?

Wenn Sie Hilfe mit Mtx Audio TH904 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Autoradio Mtx Audio

Bedienungsanleitung Autoradio

Neueste Bedienungsanleitung fĂźr -Kategorien-