MTM BPX635 Bedienungsanleitung
MTM
Bladblazer
BPX635
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für MTM BPX635 (16 Seiten) in der Kategorie Bladblazer. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/16
Video Tutorial:
Assembly
User Manual
[Revision 8 ].0 May 2022
READ THIS MANUAL CAREFULLY BEFORE USE – FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY DAMAGE AND MAY
VOID WARRANTY. • KEEP THIS MANUAL FOR FUTURE REFERENCE. • Products covered by this manual may vary in appearance,
assembly, inclusions, specifications, description, and packaging.
Petrol Powered Backpack Blower
E&OE © 2 2022 MTM
Safety
Safety messages are designed to alert you to possible dangers or hazards that could cause death, injury or
equipment or property damage if not understood or followed. Safety messages have the following symbols:
You WILL be KILLED or
SERIOUSLY INJURED if you do not
follow instructions.
You CAN be KILLED or
SERIOUSLY INJURED if you do not
follow instructions.
You CAN be INJURED if you do not
follow instructions or equipment
damage may occur.
It is important that you read and understand
the instruction manual before use and keep the
manual in a safe place for future reference.
Safety information presented here is generic in
nature – some advice may not be applicable to
every piece of equipment.
All safety precautions must be observed to
reduce the risk of personal injury when
operating the equipment.
The term “equipment" refers to your product,
be it electrical mains, battery or petrol engine
powered.
IMPORTANT – Handle the equipment safely
and carefully.
BEFORE USE - If you are not familiar with the
safe operation/handling of this equipment, or
are in any way unsure of any aspect of
suitability or correct use it for your application,
you should complete training conducted by a
person or organization qualified in safe use
and operation of this equipment, including
fuel/electrical handling and safety.
WARNINGS
• Read all safety warnings and all
instructions. Failure to follow warnings
and instructions may result in electric
shock, fire and/or serious injury.
• Never run a petrol engine in confined
areas.
• Do not operate the equipment in
flammable or explosive environments,
such as in the presence of flammable
liquids, gases or dust. Engine and
equipment may create sparks or heat that
may ignite vapours, dust etc
• Keep clear of moving parts.
• This equipment may be a potential source
of electric shock if misused.
• Do not operate the equipment if it is
damaged, malfunctioning or is in an
excessively worn state.
• Do not allow others to use the equipment
unless they have read this manual and
are adequately trained.
• When using the equipment, basic safety
precautions detailed here must always be
followed to reduce the risk of fire, electric
shock, personal injury and material
damage.
• When wiring electrically powered
equipment, follow all electrical and safety
codes.
• Ensure all power sources conform to
equipment voltage requirements and are
disconnected before connecting
equipment.
General Work Area Safety
Work areas should be clean and well it.
Do not operate the equipment if bystanders,
animals etc are within operating range of the
equipment or the general work area.
Personal Safety
Keep packaging away from children - risk of
suffocation! Operators must use the equipment
correctly. When using the equipment, consider
conditions and pay due care to persons and
property.
Prevent unintentional starting of the equipment
- ensure equipment and power source
switches are in the OFF position before
connecting or moving the equipment. Do not
carry equipment with hands/fingers touching
any controls. Remove any tools or other items
that are not a part of the equipment from it
before starting or switching on.
Stay alert and use common sense when
operating equipment. Do not overreach. Keep
proper footing and balance at all times. Do not
use equipment when tired or under the
influence of drugs, alcohol or medication. This
equipment is not intended for use by persons
with reduced physical, sensory or mental
capabilities.
You must wear appropriate protective
equipment when operating, servicing, or when
in the operating area of the equipment to help
protect from serious injury, including eye injury,
inhalation of toxic fumes, burns, and hearing
loss. Always wear eye protection. Protective
equipment such as respirators, non skid safety -
shoes, hard hat, hearing protection etc should
be used for appropriate conditions. Other
people nearby should also wear appropriate
personal protective equipment. Do not wear
loose clothing or jewellery, which can be
caught in moving parts. Keep hair and clothing
away from the equipment.
If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related
hazards.
General Care
Do not force the equipment. Use the correct
equipment for your application. The correct
equipment will perform better and be safer
within its design parameters. Do not use the
equipment if the ON/OFF switch malfunctions
– any equipment that cannot be controlled with
the ON/OFF switch is dangerous and must be
repaired.
Use the equipment and accessories etc. in
accordance with these instructions, taking into
account working conditions and the work to be
performed. Using the equipment for operations
different from those intended could result in
hazardous situations.
Before use, inspect the equipment for
misalignment or binding of moving parts, loose
components, damage or any other condition
that may affect its operation. If damaged, have
the equipment repaired by an authorized
service centre or technician before use.
Always keep the equipment and accessories
(cutting tools, nozzles, bits etc) properly
maintained. Keep the equipment, controls and
handles dry and free from dirt, oil and grease.
Store the equipment out of reach of children or
untrained persons. To avoid burns or fire
hazards, let the equipment cool completely
before transporting or storing. Never place the
equipment in places where there are
flammable materials, combustible gases or
combustible liquids etc.
The equipment is not weatherproof, and
should not be stored in direct sunlight, at high
ambient temperatures or locations that are
damp or very humid.
Blower Use and Care
WARNINGS
• Always wear a face shield when operating
the machine.
• Maintain a distance of at least 20m (60')
between the operator and any
bystanders, animals etc.
• Never blow debris in the direction of
bystanders.
Petrol Powered Backpack Blower
E&OE © 3 2022 MTM
General Fuel Safety
Petrol/fuel/gasoline is extremely
flammable – keep clear of naked
flames or other ignition sources.
• Do not spill fuel. If you
spill fuel, wipe it from equipment
immediately – if fuel gets on your clothing,
change them immediately
• Do not smoke near fuel.
• Always shut off the engine before
refuelling.
• Do not refuel a hot engine.
• Open the fuel cap carefully to allow any
pressure build up in the tank to release -
slowly.
• Always refuel in well ventilated areas.
• Always check for fuel leakage. If fuel
leakage is found, do not start or run the
engine until all leaks are fixed.
General Service Information
• Have the equipment serviced or repaired
at authorized service centres by qualified
personnel only.
• Replacement parts must be original
equipment manufacturer (OEM) to help
ensure that equipment safety is
maintained.
• Do not attempt any maintenance or repair
work not described in this instruction
manual.
• After use, the equipment and components
may still be hot allow the equipment to –
cool and disconnect spark plugs and/or
electrical power sources and/or batteries
from it before making adjustments,
changing accessories or performing
repair or maintenance.
• Do not make adjustments while the
equipment is running.
• Perform all service related activities under
suitable conditions, such as a workshop
etc.
• Replace any worn, damaged or missing
warning labels immediately.
• Do not clean equipment with solvents,
flammable liquids or harsh abrasives.
Produktspezifikationen
Marke: | MTM |
Kategorie: | Bladblazer |
Modell: | BPX635 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit MTM BPX635 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Bladblazer MTM
24 August 2024
7 August 2024
Bedienungsanleitung Bladblazer
- Bladblazer Cotech
- Bladblazer Makita
- Bladblazer Bosch
- Bladblazer Flex
- Bladblazer Vonroc
- Bladblazer Black And Decker
- Bladblazer Ryobi
- Bladblazer Skil
- Bladblazer Alpina
- Bladblazer DeWalt
- Bladblazer Einhell
- Bladblazer Worx
- Bladblazer Hikoki
- Bladblazer Hitachi
- Bladblazer Hyundai
- Bladblazer Fuxtec
- Bladblazer Kress
- Bladblazer Stanley
- Bladblazer Kärcher
- Bladblazer Güde
- Bladblazer Scheppach
- Bladblazer Meec Tools
- Bladblazer Fieldmann
- Bladblazer Husqvarna
- Bladblazer Stihl
- Bladblazer Florabest
- Bladblazer Grouw
- Bladblazer Stiga
- Bladblazer Robust
- Bladblazer Brandson
- Bladblazer Dolmar
- Bladblazer Gardena
- Bladblazer Verto
- Bladblazer Wolf Garten
- Bladblazer Craftsman
- Bladblazer Powerplus
- Bladblazer Echo
- Bladblazer Toledo
- Bladblazer McCulloch
- Bladblazer Ozito
- Bladblazer Yard Force
- Bladblazer Sun Joe
- Bladblazer Texas
- Bladblazer VARO
- Bladblazer Spear & Jackson
- Bladblazer Eurogarden
- Bladblazer Flymo
- Bladblazer Gamma
- Bladblazer Garden Feelings
- Bladblazer Gardenline
- Bladblazer GForce
- Bladblazer Grizzly
- Bladblazer Homelite
- Bladblazer Kibani
- Bladblazer MTD
- Bladblazer Tanaka
- Bladblazer Tesco
- Bladblazer Toro
- Bladblazer Troy-Bilt
- Bladblazer Powerworks
- Bladblazer Truper
- Bladblazer Jonsered
- Bladblazer Massimo
- Bladblazer Tryton
- Bladblazer Anova
- Bladblazer LawnMaster
- Bladblazer IKRA
- Bladblazer Bestgreen
- Bladblazer Maruyama
- Bladblazer Black Decker
- Bladblazer Zenoah-Komatsu
- Bladblazer Bahr
Neueste Bedienungsanleitung für -Kategorien-
4 Oktober 2024
28 September 2024
24 September 2024
20 September 2024
17 September 2024
16 September 2024
16 September 2024
15 September 2024
8 September 2024
7 September 2024