MSR WhisperLit Universal Bedienungsanleitung

MSR Grill WhisperLit Universal

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für MSR WhisperLit Universal (2 Seiten) in der Kategorie Grill. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
Scour Fuel
Line
20 X
5 in. (13 cm)
Strokes
Unscrew
Stop Nut
TOP
Remove/Replace
Pump Seal
Remove Check
Valve Assembly
Jet and
Cable Tool
Remove O-ring
Remove Plunger
ALI GN TWIST P ULL
ALI GN
POSI TION
Insert Plunger
X G Kâ„¢ E X
M
O U N TA I N
S
A F E T Y
R
E S E A R C H ®
ART# 33-302_A | EN
Do not attempt to use this stove: (1) before reading and fully understanding
this Instruction Manual; (2) if you are not prepared or comfortable attending
to a burning and/or hot stove at all times; (3) if you observe leaking fuel; or
(4) if you observe any condition with the stove system or in the surrounding
environment that would make operation of an open flamed device dangerous.
Failure to follow these directions can cause an unsafe situation leading to fire,
burns, severe injury or death.
This stove is designed for the outside (i.e., not within enclosed spaces of any
kind; e.g., tents) boiling of water or cooking of food only—never use it for
any other purpose. Use of stove within any enclosed space, or for a purpose
other than boiling water or cooking food can cause fire, burns, severe injury
or death.
Do not disassemble stove beyond what is described in these instructions. Do
not modify stove. Disassembly or modification of stove in any manner not
consistent with these instructions voids warranty and can result in an unsafe
situation where fire, burns, severe injury or death can occur.
Do not use stove if parts are missing or broken, or with replacement parts not
specific to your stove model. Use of stove with missing or broken parts, or with
replacement parts not specific to your stove model, can result in an unsafe situ-
ation where fire, burns, severe injury or death can occur.
Always use stove on a solid, stable, even surface to avoid tipping and spills.
Tipping of stove can result in an unsafe situation where fire, burns or severe
injury or death can occur.
Cascade Designs, Inc. warrants the use of appropriately sized MSR
® brand
cookware only—use of cookware other than MSR
® brand cookware will be at
user’s own risk and discretion.
WARNING
For product service and informatio n cont act:
C a s c a d e D e s i g n s , I n c .
4 0 0 0 F i r s t Av e n u e S ou t h , Se a t t l e , WA 9 8 1 3 4 U . S . A .
P h on e : 8 0 0 . 5 3 1 . 9 5 3 1 o r 2 0 6 . 5 0 5 . 9 5 0 0
w w w. m s r g e a r . c o m
I N S T R U C T I O N
M A N U A L
PUMP MAINTENANCE
Deposits in the Jet and Fuel Line reduce fuel flow and impair stove performance. Minor
deposits in the Jet can be cleared with the Shaker Needle. Major deposits may require
more extensive cleaning of the Jet and Fuel Line. At a minimum, perform the following
maintenance annually, or every time you perform the Pump Maintenance.
STOVE MAINTENANCE
FOR OUTDOOR USE ONLY
Shake the
Stove
Remove Flame
Spreader
Unscrew
the Jet
Clear the
Jet Orifice
5. Scour fuel line.
Remove cable from fuel line. Stubborn
cables can be loosened with a common
lubricant.
(WD-40
®
, pump cup oil, etc.)
Wipe cable clean.
Fully reinsert cable into fuel line.
Move cable in and out, using
5-inch strokes, 20 times.
6. Flush fuel line.
Remove Cable.
Insert Fuel Line into Pump and Fuel
Bottle
and secure Catch Arm on Fuel Pump
Groove.
Pressurize Fuel Bottle with 15 strokes.
Fully open Control Valve to flush
4 spoonfuls of fuel through Fuel Line
into an appropriate container.
(Jet uninstalled.)
WARNING: Keep away from
ignition sources.
Close Control Valve and remove Fuel
Line.
Safely dispose fuel when flushing
is complete.
7. Reassemble stove.
If stove performance is still impaired, repeat
steps 4 through 6.
CLEAR THE JET WITH THE SHAKER
NEEDLE
1. Close the control valve and wait 5
minutes for stove to cool.
2. Shake the stove up and down.
3. Preheat and run stove.
If performance does not improve, perform
Extensive Cleaning of the jet and fuel line.
EXTENSIVE CLEANING OF THE JET
AND FUEL LINE
1. Remove the flame spreader.
2. Unscrew the jet using the
jet & cable tool.
3. Remove the jet and shaker needle.
4. Clear the jet orifice with the jet
cleaning wire.
CARBON MONOXIDE, FIRE & EXPLOSION HAZARD
There are serious hazards associated with using this stove and fuel. Accidental
fire, explosion, and misuse can cause death, serious burns, and property dam-
age. You are responsible for your own safety and the safety of those in your
group. Please use good judgment.
This stove is for OUTDOOR USE ONLY. Never use this stove in a tent, vestibule,
car, house, or inside any enclosed area. This stove consumes oxygen and pro-
duces carbon monoxide gas, which is poisonous and has no odor. This stove
can easily ignite nearby combustible materials and flammable liquids or vapors.
If you use this stove in an enclosed area you can be killed or seriously burned.
Keep stove and fuel bottle away from other heat sources. Never use cookware
or an Outback Ovenâ„¢ with a diameter larger than 10 inches (25 centimeters).
Oversized cookware can overheat the fuel bottle. If you expose the fuel bottle to
high heat, it will explode and you can be killed or seriously burned.
Never let children use this stove. Keep children at least 10 feet (3 m) away from
the stove and cooking area, and supervise them at all times.
READ, UNDERSTAND, AND FOLLOW ALL instructions and warnings in this
manual before using this stove. Failure to follow warnings and instructions can
result in death, serious burns or other injury, and property damage.
DANGER
Do not disassemble stove or pump beyond what is described in these instructions. Disassembly or modification of
stove in any manner not consistent with these instructions voids warranty and can result in an unsafe situation where
fire, burns, severe injury or death can occur.
Do not use stove or pump if parts are missing or broken, or with replacement parts not specific to your stove model.
Use of stove with missing or broken parts, or with replacement parts not specific to your stove model, can result in
an unsafe situation where fire, burns, severe injury or death can occur.
WARNING
FUEL INFORMATION
TROUBLESHOOTING
The XGKâ„¢ EX stove burns a variety of fuels by using two different Jets.
1.
The GK Jet is used for white gas, kerosene, unleaded auto gas, and aviation gas.
This Jet is preinstalled in your stove.
2.
The X Jet is for jet fuel, and diesel. This Jet is included in the parts kit with your stove.
Use MSR® SuperFuel™ white gas for optimal performance. It is the highest-quality fuel available for your stove.
Fuels other than MSR SuperFuel white gas lead to rapid stove clogging, requiring more frequent Jet and Fuel Line
cleanings. The fuels chart below is a guide to help you find white gas when traveling internationally. Do not use
leaded fuels.
For more information on international fuel names go to www.MSRGEAR.com
U.S.A./UK/
Canada
Germany/
Switzerland Japan France Holland Spain
White gas/
Naphtha Kocherbenzin/
Reinbenzin White gas Pétrole à brûler/
Essence C Wasbenzine Bencina blanca
Kerosene Toh-yu PétrolePetroleum Kerosin Petroleum
Lampolie Parafina
Unleaded auto
gas Autobenzin Gasoline Essence sans
plomb Benzine Gasolina sin
plomo
Diesel Diesel Diesel Diesel Diesel Diesel
Problem:
Leaking Fuel Cause: Solution:
At Pump and Fuel Bottle Connection Damaged or Missing Pump Seal Replace Pump Seal
At Pump and Fuel Line Connection Damaged or Missing Fuel Tube O-ring Replace Fuel Tube O-ring
At Control Valve Stem Damaged or Missing Control Valve
O-ring Replace Control Valve O-ring
In Pump Plunger Chamber Obstructed Check Valve Clean Check Valve Cavity
Problem:
Poor Performance Cause: Solution:
Erratic Yellow Flames Improper Preheating Repeat Preheating Stove
Pump Not Pressurizing Fuel Bottle Damaged Pump Cup Replace Pump Cup
Plunger Hard to Pump Dry Pump Cup Lubricate Pump Cup
Diminished Flames Low Fuel Bottle Pressure Pump the Plunger
Slow Boil Times Clogged Jet or Fuel Line Clear Jet and Clean Fuel Line
Diminished Flames at Altitude Insufficient Airflow Open Windscreen Slightly
Remove
Cable
O-rings can become dry, cracked or
torn with use. Their lifespan is affected
by dirt, debris, temperature, friction and
frequency of use. For this reason, please
inspect your O-rings before every trip.
Replace dry, cracked, or torn O-rings
immediately, and replace all O-rings
annually, regardless of appearance.
Replacement O-rings and Pump Seals can
be found in the Annual Maintenance Kit,
or the more comprehensive Expedition
Service Kit, purchased separately from an
MSR® dealer.
FUEL TUBE O-RING
1. Remove plunger.
Align, twist, and pull.
2. Remove the fuel tube bushing
and O-ring.
Remove the O-ring with the end of the fuel line
or a safety pin.
3. Inspect O-ring.
4. Replace O-ring.
If needed, a spare fuel tube O-ring is provided.
5. Lubricate Pump Cup.
Use a drop of pump cup oil or any
mineral-based oil.
6. Insert Plunger.
Align plunger/bushing with Arrow 1
holes in pump body.
Push the plunger/bushing into the
pump body until it snaps in place.
CONTROL VALVE O-RING
1. Unscrew the stop nut 2 turns.
2. Unscrew the control valve 6 turns.
3. Unscrew the stop nut completely and remove
the control valve.
4. Inspect O-ring.
5. Replace O-ring if damaged.
Disassemble control valve assembly.
Remove O-ring.
PUMP SEAL
Inspect pump seal and replace if
damaged.
CLEANING THE CHECK VALVE
1. Remove the check valve assembly.
2. Clean any debris from the check valve and
pump cavity.
3. Reinsert the check valve assembly.
5 MIN.
WAIT!
BELOW EYE
LEVEL
CLO SE
4 ft. (1.2 m) MIN.
DISTANCE from
COMBUSTIBLE
MATERIALS
25 ft. (7.6 m) MIN.
DISTANCE from
FLAMMABLE LIQUIDS/
VAPORS
10 in. (25 cm)
DIA. COOKWARE
MAX!
10 Strokes
10 MIN
1/2 TURN SLOWLY
OP EN O PEN
WAIT!
OK!
1 TURN
3 SEC
OPEN CLOSE
FILL LINE
AIR
FUEL
CLOSE St roke
FULL
20-30
St roke s
1/2 FULL
30-20
St roke s
STOP
Pump
Body
Control
Valve
Assembly
Fuel Tube
O-ring
Check
Valve
Fuel Pump
Groove
Pump
Seal
Plunger
Fuel Tube
Bushing
Pump
Cup
Plunger
Bushing
Plunger
Bushing
Tabs
Priming
Pad
Pot
Supports/Legs
Flame
Spreader
GK Jet
Shaker
Needle
Fuel Line
(Brass) End
Catch
Arm
Generator
Tube
X Jet
STEADY
BLUE FLAME
1
32
4 5 76
PREPARE FUEL BOTTLE
CONNECT STOVE AND PUMPSET UP STOVE
PREHEAT STOVE TURN STOVE ON TURN STOVE OFF
1. Insert the fuel line into pump.
With fuel bottle on its side, control valve points up.
2. Secure the catch arm on fuel pump groove.
Keep fuel line straight for safety.
1. Rotate the stove legs and pot supports.
2. Place stove on the center of heat reflector.
1. Release only 1/2 tablespoon of fuel.
Open control valve 1 turn and let fuel flow for 3 seconds.
Close control valve.
Look for fuel in burner cup and on priming pad.
2. Light fuel
A brief soccer ball size flame is normal.
USE STOVE TO COOK
XGKâ„¢ EX STOVE OPERATING INSTRUCTIONS
To avoid being killed or seriously injured, READ, UNDERSTAND,
AND FOLLOW ALL instructions and warnings in this manual before using
this stove.
The XGK EX stove is sold with two interchangable Jets so it can burn a
variety of fuels. To ensure the correct Jet is installed for the type of fuel to be used,
see Fuel Information.
1. Fill Fuel Bottle to fill line only.
Air space is necessary for fuel expansion.
2. Insert Pump into Fuel Bottle and firmly tighten.
3. Close the Pump Control Valve, then stroke Plunger (20-30 strokes).
Less fuel requires more strokes or pressure.
Pump until firm resistance is felt.
WARNING
Use MSR ® fuel bottles only. Non-MSR® fuel bottles may leak fuel creating an unsafe situation leading to fire,
burns, severe injury or death.
Keep children far away from stove and fuel—Cascade Designs, Inc. recommends no less than 10 feet
(3+ meters). Never leave a burning or hot stove unattended. An unattended stove can lead to fire and/or a
situation where children, pets, or the unwary can be burned, injured, or killed.
Use extreme caution when using stove in temperatures below freezing. In freezing temperatures O-rings can
stiffen and leak fuel. Always check for fuel leaks before and after pressurizing bottle, priming, and during and
after lighting stove. Use of a leaking stove can cause fire, burns, severe injury or death.
WARNING
Never relight a heated stove. Always let an extinguished stove cool for at least 5 minutes before relighting.
Relighting a heated stove can cause large flames that can cause fire, burns, severe injury or death.
Never move a burning or hot stove. Always extinguish stove and cool for at least 5 minutes before moving.
Moving a burning or hot stove can cause fire, burns, severe injury or death.
WARNING
Keep fuel bottle away from the stove burner and other heat sources. Position connected fuel bottle so that it is
as far away from the burner as possible. Use of bottle near burner or other heat sources can result in the fuel
bottle exploding and causing fire, burns, severe injury or death.
Never place windscreen around fuel bottle. Never use cookware with a diameter greater than 10 inches
(25 centimeters). Never place and operate two or more stoves together. Never operate stove with empty or
dry cookware. Never use non-MSR ® reflectors or diffusers. Use of stove in any of the proceeding manners can
result in the fuel bottle exploding and causing fire, burns, severe injury or death.
Never use cookware of any size that is ill-suited and/or inappropriate for use with stove, particularly stove pot
supports (e.g., cookware with a convex or concave bottom, some enameled cookware, etc.). Use of stove with
ill-suited and/or inappropriate cookware can result in cookware and/or stove instability and a situation where
hot cookware and/or cookware contents can spill and cause fire, burns, severe injury or death. Cascade Designs,
Inc. warrants the use of appropriately sized MSR ® brand cookware only—use of cookware other than MSR®
brand cookware will be at user’s own risk and discretion.
WARNING
Always store fuel bottle with cap securely tightened where it cannot be accessed by children. Storage of fuel
bottle with loose cap and/or where accessible by children can result in a child obtaining possession of fuel
bottle and accessing bottle contents. Exposure to bottle contents topically and/or by ingestion can cause
poisoning, severe injury, or death.
Always store fuel bottle in a well-ventilated location away from any possible heat or ignition source such as:
water heaters, stoves, pilot lights, or furnaces. Storing bottle near any heat or ignition source can result in the
fuel bottle exploding and causing fire, burns, severe injury or death.
WARNING
Keep combustibles at least 4 feet (1.2 meters) away from the top and sides of a burning stove, or a stove
that you are in the process of lighting. Keep flammable liquids and vapors at least 25 feet (7.6 meters) away
from the top and sides of a burning stove, or a stove that you are in the process of lighting. This stove can
ignite combustible materials, flammable liquids and vapors creating a situation where fire, burns, severe injury
or death can result.
This stove is designed for the outside (i.e., not within enclosed spaces of any kind; e.g., tents) boiling of water
or cooking of food only—never use it for any other purpose. Use of stove within any enclosure, or for a purpose
other than boiling water or cooking food can cause fire, burns, severe injury or death.
WARNING
Before every use, look for fuel on the fuel bottle, pump, fuel line, burner, on the area beneath and around and
stove. Do not light stove if you see or smell fuel. See Troubleshooting. Use of stove where fuel has leaked
and/or is leaking can cause fuel to ignite causing fire, burns, severe injury or death.
Never disconnect the fuel line, pump, or fuel bottle when stove is burning, hot, or near any open flame.
Never disconnect fuel line, pump, or fuel bottle when control value is in an open (i.e., fuel flowing) position.
Disconnecting fuel line, pump, or fuel bottle when stove is burning, hot, or near any open flame, or discon-
necting fuel line, pump, or fuel bottle when control value is in an open (i.e., fuel flowing) position can lead to
spilled fuel that can ignite and cause fire, burns, severe injury or death.
WARNING
Never place your head or body above the stove while priming, lighting, or cooking. Because stove maintains
an open flame, placement of head or body above stove is an unsafe practice that can cause fire, burns, severe
injury or death.
Never use excess fuel to preheat stove. Use of excess fuel for priming can lead to leaking or spilled fuel that
can cause fire, burns, severe injury or death.
Please familiarize yourself with the parts of your
XGK EX stove. This stove requires a priming or
preheating step to convert liquid fuel into vapor
to run properly. Priming or preheating the stove
is addressed in Step 4.
KNOW YOUR MSR ®
XGK
â„¢
EX STOVE
WARNING
Do not use this stove: (1) before reading and fully understanding this Instruction Manual; (2) if you are not
prepared or comfortable attending to a burning and/or hot stove at all times; (3) if you observe leaking fuel;
or (4) if you observe any condition with the stove system or in the surrounding environment that would make
operation of an open flamed device dangerous. Failure to follow these directions can cause an unsafe situation
leading to fire, burns, severe injury or death.
1. Set up Windscreen.
Fold the ends of Windscreen together.
Leave a 1-inch (2.5 cm) gap between Windscreen and pot for optimal performance.
Use Windscreen to improve performance in all conditions.
2. Place pot on stove.
3. Maintain Fuel Bottle pressure.
Add approximately 10 strokes every 10 minutes to maintain performance.
Hold Fuel Bottle firmly while pumping.
1. Wait for preheat flame to reduce in size.
2. Open 1/2 turn and wait for steady blue flame.
3. Slowly open control valve.
1. Close Pump Control Valve on Fuel Bottle.
Residual fuel will continue to burn with a small flame for several minutes.
2. Close Flame Adjuster Valve on stove.
After flames are out, wait 5 minutes for stove to cool.
3. Unlock Catch Arm and remove Fuel Line from Pump.
4. Depressurize Fuel Bottle and repack stove.
Hold the Fuel Bottle upright, away from your face and any sources of heat or ignition.
Slowly unscrew Pump to depressurize Fuel Bottle.
To transport the Fuel Bottle, the Pump may be left inside a depressurized Fuel
Bottle. The Pump can also be removed and replaced with the Fuel Bottle Cap.


Produktspezifikationen

Marke: MSR
Kategorie: Grill
Modell: WhisperLit Universal
Breite: 101.6 mm
Tiefe: 101.6 mm
Gewicht: 320 g
Produkttyp: Camping-Herd
Empfohlene Nutzung: Rucksackreisen
Produktfarbe: Red, Stainless steel
Höhe: 152.4 mm
Material: Metall
Faltbar: Ja
Paketgewicht: 420 g
Einfach zu säubern: Ja
Wärmequelle: Butan/Propan
Anzahl Herdplatten/Kochzonen: 1 Zone(n)
Anzahl der Beine: 3 Bein(e)
Zündungstyp: Piezo
Einfache Montage: Ja
Einfach zu zerlegen: Nein
Einfache Aufbewahrung: Ja
Windschutzscheibe enthalten: Ja
Bedienungsanleitung: Ja
Leicht zu transportieren: Ja
Kochzeit: 4.4 min
Betriebszeit (min.): 75 min
Betriebszeit (max.): 155 min
Hitzeschirm/Brennerschutz enthalten: Ja

Brauchst du Hilfe?

Wenn Sie Hilfe mit MSR WhisperLit Universal benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Grill MSR

Bedienungsanleitung Grill

Neueste Bedienungsanleitung für -Kategorien-