Mpman CSU384PLL Bedienungsanleitung

Mpman Radio CSU384PLL

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Mpman CSU384PLL (24 Seiten) in der Kategorie Radio. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/24
CD Boombox
with PLL AM/FM Radio and USB Port
Model: CSU384PLL
www.mpmaneurope.com
Note: Please read and follow these instructions before using your unit.
WARNING
TO PREVENT ELECTRIC SHOCK; DO NOT USE THIS PLUG WITH AN EXTENSION CORD
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO
PREVENT BLADES EXPLOSURE.
TO PREVENT FIRE OR SHOCK HAZARD; DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
DO NOT INSTALL THIS EQUIPMENT IN A CONFINED SPACE SUCH AS A BOOK CASE OR
SIMILAR UNIT.
The lighting flash with
arrowhead symbol, with an
equilateral triangle is intended
to alert the user to the
presence of uninsulated
dangerous voltage within the
products enclosure that may
be of sufficient magnitude to
constitute a ris
k of electric
shock to persons.
CAUTION
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instruction in the literature
accompanying the appliance.
RISK OF ELECTRONICS
SHOCK
DO NOT OPEN
CAUTION: TO REDUCE
THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE
COVER (OR BACK). NO
USER SERVICEABLE
PARTS INSIDE REFER
SERVICING TO QUALIFIED
SERVICE PERSONNEL.
LASER SAFETY
This unit uses a laser. Only a qualified service
person should remove the cover or attempt to
service this device to avoid possible eye injure.
Caution: USE OF CONTROLS OR
ADJUSTMENT OF PERFORMANCE OF
PROCEDURE OTHER THAN SPECIFIED
HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
DANGER:
IN
VISIBLE LASER RADIATION WHEN
OPEN AND INTERLOCK FAILED OR
DEFEATED. AVOID DIRECT EXPOSURE
TO LASER BEAM.
LOCATION OF CONTROLS
1. Speaker 11. CD door
2. POWER / SOURCE Button 12. Handle
3. MODE/MEMORY/PROG Button 13. FM Telescope Antenna
4. Button 14. E – VOLUM Battery Door
5. 15. Aux VOLUME + Button - in Jack
6. S < KIP / TUN Button 16. AC Socket
7. > SKIP / TUN Button 17 USB Slot
8. Button M+ / STOP
9. / PPLAY AUSE Button
10. LCD display
AC OPERATION
Connect the plug to the AC socket of the unit and the other end to a standard AC outlet.
ATTENTION
1. Do not plug or unplug the power cable while you have wet hands;
2. When planning not to use this unit for a long time, disconnect the power cable from the wall
outlet;
3. When disconnecting the power cord from the wall outlet, do not pull on the cord in order to
avoid shock risks caused by damaged cable.
ENG 1
BATTERY OPERATION
Disconnect the AC Cord Set completely. Open the Battery Compartment Door and insert 6 pieces
UM- 2 "C" size batteries into the battery compartment with battery polarity as shown inside the
battery compartment.
SEQUENCE OF FUNTION MODE
The sequence o the function mode is f : “ CD USB AUX FM Radio AM Radio”
RADIO OPERATION
Press POWER / SOURCE button and select the desired radio mode.
MANUAL STATION SELECTION
1. Press the SKIP/T > T < UN or SKIP/ UN button step by step to tune to the desired radio stations
2. Press VOLUME + or VOLUME Button for the desired volume level;
SEARCH STATION OPERATION
1. Press and hold the SKIP/TUN > or SKIP/TUN < button for approx. 1 second, it will start to search
the next radio station in the direction of the search.
2. The search operation simply finds stations with strong signals. Stations with weak reception can
only be tuned in manually.
3. Press VOLUME + or VOLUME – Button for the desired volume level;
ANTENNA
For best reception, fully extend the FM Antenna to receive FM stations. For AM reception, the unit
has a built in antenna, turn the whole unit for best reception.-
FM STEREO
When turn to a FM Stereo Broadcast, will be shown on the LCD display.“ST”
MEMORIZE RADIO STATIONS
1. Tune to the desired station.
2. button, Press MODE/MEMORY/PROG the LCD display will show ‘ P01.
3. T > Press SKIP/ UN or SKIP/TUN < button and s number of your progrelect the desired am
4. Press MODE/MEMORY/PROGRAM to store the radi station in the memory.o
5. Repeat steps from 1 to 3 to store more tracks in memory. You can store up to 20 radio
stations in the memory.
TO SELECT THE RADIO STATION IN THE MEMORY
Press M+ / STOP r button for the adio station memory and press the M+ / STOP button skip up to the
next memory station.
ENG 2
CD/MP3 PLAYBACK FUNCTION
To play a CD/MP3 disc, please follow the steps underneath:
1. Press POWER / SOURCE button and select the CD mode.
2. Open the CD door, Ins with the printed side facing up and close the CD door;ert the disc
3. Disc information (total number of tracks) will appear on the LCD displa and play y
automatically.
4. For MP3 disc, p and holdress the FOLDER button and LCD display will show FOLDER . Use
SKIP/TUN > or SKIP/TUN < button to select the folder you want to listen.
5. Press VOLUME + or VOLUME Button for the desired volume level;
6. SPress TOP button to stop playing the disc.
Programming the CD/MP3 disc
T he programming of the CD should be done /MP3 disc during STOP mode.
1. Press MODE/MEM/FOLDER button, LCD display will show (XX indicates the preset ‘ PXX ‘
number of track to be programmed).
2. Press the SKIP/TUN > or SKIP/TUN < buttons to select the desired track.
Press the e this track in memoryMODE/MEM/FOLDER button again to stor .
3. Repeat steps from 2 to 3 to store more tracks in memory. You can store up to 20 tracks in the
memory for CD disc and 99 tracks in the memory for MP3 disc.
4. Press the PLAY/PAUSE button to play the disc in the programmed order.
5. To stop playing, press the STOP/M+ button.
6. To cancel the programming list, press the STOP button and open the CD door or /M+ press
SOURCE button.
Playing MP3 files with USB
1. Press the POWER / SOURCE Button to select the USB mode.
2. Plug your USB device into the USB port on the unit, the unit will start reading the files in the
USB device, it will show the total number of tracks of the device after reading and play from
track 001 automatically.
3. utton display P ress and hold /F bthe MODE/MEM OLDER and LCD will show “ FOLDER . Use
SKIP + - or SKIP button to select the folder you want to listen.
4. During playing, press the PLAY/PAUSE Button to temporarily pause playing. To resume,
press the Play/Pause Button again.
Skip Mode
1. Button During play or pause mode, press the SKIP + to go to the next track.
2. During play or pause mode, press the S Button to go back to the previous track.KIP -
ENG 3
Different Play Mode
Press the Mode Button to select different kinds of play mode with the following sequence.
For Audio CDs : Repeat ne Normal O Repeat All
For MP3 Files : Repeat One Repeat Folder Normal   Repeat All
Repeat One repeat the track being played.
Repeat All repeat all the tracks in the storage media.
Repeat Folder repeat all the tracks in the entire album/folder.
Normal play the tracks in sequence
AUX IN CONNECTION
1. Press POWER / SOURCE button and select the Aux in mode. The display will show “AUX”.-
2. Insert one side of the audio cable (requires 3.5mm stereo plug, not supplied) into the line-out
jack or phones jack on your audio device and the other side to the aux in jack on the unit.-
3. Turn on your audio device and follow the playback instruction.
4. To stop this function, press SOURCE button to turn off your audio device.
Note:
Because of none andardized format definition/production of MP3 CD, playback quality & -st
performance are not guaranteed.
Manufacturer is not responsible for the playability of MP3 in any case due to recording conditions
such as PC performance, writing software, media ability and etc.
ENG 4


Produktspezifikationen

Marke: Mpman
Kategorie: Radio
Modell: CSU384PLL

Brauchst du Hilfe?

Wenn Sie Hilfe mit Mpman CSU384PLL benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Radio Mpman

Bedienungsanleitung Radio

Neueste Bedienungsanleitung für -Kategorien-