Moxa NPort IA-5250I Bedienungsanleitung

Moxa Server NPort IA-5250I

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Moxa NPort IA-5250I (4 Seiten) in der Kategorie Server. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

— 1 — — 2 — — 3 —

NPort IA5250I/5250I-T Series

Quick Installation Guide

First Edition, October 2009

1. Overview

NPort IA device servers deliver easy and reliable serial-to-Ethernet

connectivity for the industrial automation market. The servers support

several operation modes—TCP Server, TCP Client, UDP, Real COM,

Pair Connection, and Ethernet Modem—ensuring the compatibility of

network software, and are an ideal choice for connecting

RS-232/422/485 serial devices, such as PLCs, sensors, meters, motors,

drives, barcode readers, and operator displays. NPort IA5250I/5250I-T

device servers come with a compact and rugged DIN-Rail mountable

casing.

2. Package Checklist

Before installing NPort IA device servers, verify that the package

contains the following items:

• 1 NPort IA Series Device Server

• Documentation and Software CD

• NPort IA Series Quick Installation Guide

Optional Accessories

y DR-4524 45W/2A DIN-Rail 24 VDC Power Supply with

universal 85 to 264 VAC input

y DR-75-24 75W/3.2A DIN-Rail 24 VDC Power Supply with

universal 85 to 264 VAC input

y DR-120-24 120W/5A DIN-Rail 24 VDC Power Supply with 88

to 132 VAC/176 to 264 VAC input by switch

Notify your sales representative if any of the above items is missing or

damaged.

3. Hardware Introduction

NPort IA5250I/5250I-T device servers are used to control

RS-232/422/485 devices for industrial automation environments. NPort

5250I/5250I-T has 2 RS-232/422/485 male DB9 serial ports with 2KV

isolation for all interfaces.

NPort IA5250I/5250I-T Appearance

PWR1

PWR2

RDY

Ethernet 1

Ethernet 2

Reset

5250

Copper

Ethernet

LED

Indicators

Top View Bottom ViewFront View

Reset

V1+

V2+

Dual power input

and relay output

RS-232/422/485

RS-232/422/485P1 P2

Reset Button—Press the Reset button continuously for 5 sec to load

factory defaults: Use a pointed object, such as a straightened paper clip or

toothpick, to press the reset button. This will cause the Ready LED to

blink on and off. The factory defaults will be loaded once the Ready LED

stops blinking (after about 5 seconds). At this point, you should release

the reset button.

NPort IA LED Indicators (front panel)

Name Color Function

PWR1,

PWR2 red Power is being supplied to power input PWR1,

PWR2.

red

Steady on: Power is on and NPort IA is booting

up.

Blinking: Indicates an IP conflict, the DHCP

or BOOTP server did not respond

properly, or a relay output occurred.

green

Steady on: Power is on and NPort IA is

functioning normally.

Blinking: The device server has been located

by Administrator’s Location

function.

Ready

off Power is off, or a power error condition exists.

Orange 10 Mbps Ethernet connection.

Green 100 Mbps Ethernet connection.

Ethernet

off Ethernet cable is disconnected, or has a short.

orange Serial port is receiving data.

green Serial port is transmitting data.

P1, P2

off No data is being transmitted or received through

the serial port.

4. Hardware Installation Procedure

STEP 1: After removing NPort IA from the box, the first thing you

should do is connect the power adaptor. Connect the 12-48

VDC power line with NPort IA’s terminal block, or connect

the DIN-Rail power supply with NPort IA’s terminal block.

STEP 2: Connect NPort IA to a network. Use a standard

straight-through Ethernet cable to connect to a Hub or

Switch. When setting up or testing NPort IA, you might find

it convenient to connect directly to your computer’s Ethernet

port. In this case, use a cross-over Ethernet cable.

STEP 3: Connect NPort IA’s serial port to a serial device.

STEP 4: NPort IA is designed to be attached to a DIN-Rail or

mounted on a wall. The two sliders on NPort IA’s rear panel

serve a dual purpose. For wall mounting, both sliders should

be extended. For DIN-Rail mounting, start with one slider

pushed in, and the other slider extended. After placing the

NPort IA on the DIN-Rail, push the extended slider in to

lock the device server to the rail. The two placement options

are illustrated in the accompanying figures.

Wall Mount DIN-Rail

Push here to lock

to the DIN-Rail

5. Software Installation Information

To install NPort Administration Suite, insert the Document &

Software CD into your computer’s CD-ROM drive. Once the

installation window opens, click on the Installation Administration

Suite button, and then follow the instructions on the screen. To view

detailed information about NPort IA Administration Suite, click on

the Documents button, and then select NPort IA5250I/5250I-T Series

User’s Manual to open the pdf version of this user’s manual.

P/N: 1802051500212

— 4 — — 5 — — 6 —

6. Pin Assignments and Cable Wiring

RS-232/422/485 (Male DB9) Pinouts

12345

6789

PIN RS-232 RS-422/

RS-485 (4W) RS-485 (2W)

1 DCD TxD-(A) ---

2 RXD TxD+(B) ---

3 TXD RxD+(B) Data+(B)

4 DTR RxD-(A) Data-(A)

5 GND GND GND

6 DSR --- ---

7 RTS --- ---

8 CTS --- ---

9 --- --- ---

Four cables are available as optional accessories that can be used to

connect NPort IA to RS-232 serial devices. For your convenience, we

show precise cable wiring diagrams for each of the two cables.

Female DB9 to Male DB9

NPort IA

9 pins 9 pins

DCD

RxD

TxD

DTR

GND

DSR

RTS

CTS

RS-232

Device

DCD

TxD

RxD

DSR

GND

DTR

CTS

RTS

Cable Wiring

Female DB9 Male DB9Male DB9 Female DB9

Female DB9 to Male DB25

NPort IA

9 pins 25 pins

DCD

RxD

TxD

DTR

GND

DSR

RTS

CTS

RS-232

Device

DCD

TxD

RxD

DSR

GND

DTR

CTS

RTS

Cable Wiring

Female DB9 Male DB25Male DB9 Female DB25

7. Specifications

Power requirements NPort IA5250I/5250I-T: 12 to 48 VDC, 440 mA

at 12 V (max.)

Operating temp. 0 to 55°C (32 to 131°F),

-40 to 75◦C (-40 to 167◦C) for wide temp model

Operating humidity 5 to 95% RH

Dimensions

(W×D×H)

29 × 89.2 × 118.5 mm

1.14 × 3.51 × 4.67 in

Surge protection 15 KV ESD for all signals

Isolation protection 2KV for RS-232/422/485

Magnetic isolation 1.5 KV for Ethernet

Power line protection 4 KV Burst (EFT), EN61000-4-4

2 KV Surge, EN61000-4-5

Regulatory approvals FCC Class A, CE Class A

Click here for online support:

www.moxa.com/support

The Americas: +1-714-528-6777 (toll-free: 1-888-669-2872)

Europe: +49-89-3 70 03 99-0

Asia-Pacific: +886-2-8919-1230

China: +86-21-5258-9955 (toll-free: 800-820-5036)

Reproduction without permission is prohibited.

Produktspezifikationen

Marke:	Moxa
Kategorie:	Server
Modell:	NPort IA-5250I
Gewicht:	380 g
Betriebstemperatur:	0 - 55 °C
Relative Luftfeuchtigkeit in Betrieb:	5 - 95 %
Unterstützte Netzwerkprotokolle:	ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, Rtelnet, DNS, SNMP V1, HTTP, SNTP
Zertifizierung:	CE, FCC
LED-Anzeigen:	Ja
Temperaturbereich bei Lagerung:	-40 - 85 °C
Management-Protokolle:	SNMP v1
Kompatible Betriebssysteme:	Windows 95, 98, ME, NT, 2000, XP, 2003, Vista, XP x64, 2003 x64, Vista x64\r\nSCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i\r\nLinux kernel 2.4.x, 2.6.x
Abmessungen (BxTxH):	29 x 89.2 x 118.5 mm
Serielle Schnittstelle:	RS-232/422/485
Anzahl serielle Anschlüsse:	2
Sicherheit:	UL (UL60950-1), UL508, TÜV (EN60950-1)
Link/Act-LED:	Ja
Entkopplung:	2 kV