Moxa NPort 6610-8 Bedienungsanleitung

Moxa Server NPort 6610-8

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Moxa NPort 6610-8 (7 Seiten) in der Kategorie Server. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/7
P/N: 1802066500020
*1802066500020*
NPort 6600 Series
Quick Installation Guide
Version 12.1 21 , January 20
Technical Support Contact Information
www.moxa.com/support

21 . A20 Moxa Inc ll rights reserved.
- - 2
Overview
The NPort 6600 series of serial device servers includes 8- -port, 16 port,
and 32-port models for connecting larger numbers of serial devices to
Ethernet. Some applications now also require better security when
transmitting data through a network. The NPort 6600 series of device
servers use DES, 3DES, and AES data encryption to provide secure
network communication.
Package Checklist
Before Installing your NPort 6600 series secure device server, verify that
the package contains the following items:
• NPort 6600 device server
• - - - CBL RJ45M9 150: 8 pin RJ45 to DB9 male connection cable, 150 cm
• Power Cord (AC models only)
• - Two rack mount ears
• Documentation
• Quick installation guide (printed)
• Warranty card
Optional Accessories
• -35 - M K DK A: 35 mm DIN Rail ounting it
• - DIN Rail Power Supply
• - - - X NM TX01/NM TX01 T: Network module with one 10/100BaseT
Ethernet port ( c r RJ45 connector; supports ascade edundancy)
• - -S- - -S- - NM FX01 SC/NM FX01 SC T: Network module with one
100BaseFX s m f c ; ingle ode iber port (SC onnector supports cascade
redundancy)
• - -S- - -S- - NM FX02 SC/NM FX02 SC T: Network module with two
100BaseFX single mode fiber ports (SC c connectors; supports ascade
r edundancy)
• - -M- - -M- - NM FX01 SC/NM FX01 SC T: Network module with one
100BaseFX multiode fiber port (SC connector; supports cascade
r ) edundancy
• - -M- - -M- - NM FX02 SC/NM FX02 SC T: Network module with two
100BaseFX m -m fulti ode iber ports (SC connectors; supports cascade
r edundancy)
NOTE: Please notify your sales representative if any of the above items is
missing or damaged.
- - 3
Hardware Introduction
Demonstrated 8 port model to be an example.
Reset Button
Press the Reset button continuously for 5 second to load factory defaults:
Use a pointed object to press the reset button. Release the button after
the Ready LED stops blinking.
RS- /d n ) 485 adjustable pull up ow resistor (150/1 KΩ
The NPort 6650 has 3 DIP Switches associated with each serial port for
configuring the pull up/ -down resistors for RS 485 applications. The
switches are located in a recess on the bottom of the NPort 6650. To
access the switches, first remove the panel covering the recess.
SW
1
3
Pull Up
Terminator
ON
1 KΩ
1 20 Ω
OFF
1 K 50 Ω
–
NOTE
For RS-232 applications, all DIP Switches for the port should be
set to the OFF position.


Produktspezifikationen

Marke: Moxa
Kategorie: Server
Modell: NPort 6610-8

Brauchst du Hilfe?

Wenn Sie Hilfe mit Moxa NPort 6610-8 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Server Moxa

Bedienungsanleitung Server

Neueste Bedienungsanleitung für -Kategorien-