Moxa NPort 6610-16-48V Bedienungsanleitung

Moxa Server NPort 6610-16-48V

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Moxa NPort 6610-16-48V (7 Seiten) in der Kategorie Server. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/7

P/N: 1802066500020

*1802066500020*

NPort 6600 Series

Quick Installation Guide

Version 12.1 21 , January 20

Technical Support Contact Information

www.moxa.com/support



21 . A20 Moxa Inc ll rights reserved.

- - 2

Overview

The NPort 6600 series of serial device servers includes 8- -port, 16 port,

and 32-port models for connecting larger numbers of serial devices to

Ethernet. Some applications now also require better security when

transmitting data through a network. The NPort 6600 series of device

servers use DES, 3DES, and AES data encryption to provide secure

network communication.

Package Checklist

Before Installing your NPort 6600 series secure device server, verify that

the package contains the following items:

• NPort 6600 device server

• - - - CBL RJ45M9 150: 8 pin RJ45 to DB9 male connection cable, 150 cm

• Power Cord (AC models only)

• - Two rack mount ears

• Documentation

• Quick installation guide (printed)

• Warranty card

Optional Accessories

• -35 - M K DK A: 35 mm DIN Rail ounting it

• - DIN Rail Power Supply

• - - - X NM TX01/NM TX01 T: Network module with one 10/100BaseT

Ethernet port ( c r RJ45 connector; supports ascade edundancy)

• - -S- - -S- - NM FX01 SC/NM FX01 SC T: Network module with one

100BaseFX s m f c ; ingle ode iber port (SC onnector supports cascade

redundancy)

• - -S- - -S- - NM FX02 SC/NM FX02 SC T: Network module with two

100BaseFX single mode fiber ports (SC c connectors; supports ascade

r edundancy)

• - -M- - -M- - NM FX01 SC/NM FX01 SC T: Network module with one

100BaseFX multiode fiber port (SC connector; supports cascade

r ) edundancy

• - -M- - -M- - NM FX02 SC/NM FX02 SC T: Network module with two

100BaseFX m -m fulti ode iber ports (SC connectors; supports cascade

r edundancy)

NOTE: Please notify your sales representative if any of the above items is

missing or damaged.

- - 3

Hardware Introduction

Demonstrated 8 port model to be an example.

Reset Button

Press the Reset button continuously for 5 second to load factory defaults:

Use a pointed object to press the reset button. Release the button after

the Ready LED stops blinking.

RS- /d n ) 485 adjustable pull up ow resistor (150/1 KΩ

The NPort 6650 has 3 DIP Switches associated with each serial port for

configuring the pull up/ -down resistors for RS 485 applications. The

switches are located in a recess on the bottom of the NPort 6650. To

access the switches, first remove the panel covering the recess.

Pull Up

Pull D n ow

Terminator

1 KΩ

1 20 Ω

OFF

1 K 50 Ω

–

NOTE

For RS-232 applications, all DIP Switches for the port should be

set to the OFF position.

Produktspezifikationen

Marke:	Moxa
Kategorie:	Server
Modell:	NPort 6610-16-48V
Gewicht:	3580 g
Betriebstemperatur:	0 - 55 °C
Relative Luftfeuchtigkeit in Betrieb:	5 - 95 %
Unterstützte Sicherheitsalgorithmen:	802.1x RADIUS, DES, SSH, SSL/TLS
Unterstützte Netzwerkprotokolle:	ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, HTTP, SMTP, ARP, PPPoE, DDNS
Zertifizierung:	CE, FCC, UL, CUL, TUV
Display:	LCD
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	1
Ethernet LAN Datentransferraten:	10, 100 Mbit/s
Temperaturbereich bei Lagerung:	-20 - 70 °C
Management-Protokolle:	SNMP V1/V2c/V3
Serielle Schnittstelle:	RS-232
Eingangsspannung:	48 V
Anzahl serielle Anschlüsse:	16
Sicherheit:	UL (UL60950-1), TÜV (EN60950-1)
Konnektivität LEDs:	Ja
Druckanstieg-Schutzspannung:	0.5 kV
Entkopplung:	1.5 kV