Moxa CN2650I Bedienungsanleitung

Moxa Server CN2650I

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Moxa CN2650I (6 Seiten) in der Kategorie Server. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/6
P/N: 180202600021A
* *180202600021A
CN2600 Series
Quick Installation Guide
Version 6.4 1 , June 202
Technical Support Contact Information
www.moxa.com/support

21 . A20 Moxa Inc ll rights reserved.
- - 2
Overview
The Moxa CN2600 dual-LAN terminal servers have 8 or 16 RS- or 232
RS 232/422/485- ports and dual 10/100 Mbps Ethernet LAN ports, and
some models come with dual AC power inputs. The CN2600 terminal
servers are used to connect terminals, modems, printers, and other
serial devices to LAN hosts, and all models comply with TCP/IP and
IEEE 802.3 specifications using standard twisted pair 10/100BaseTX
cable as the transmission medium.
CN2600 Series Models
The CN2600 Series includes the following models: - -CN2610 8, CN2610
8- -2AC 10, CN26 16, CN2610 16 2AC- - , CN2650 2AC-8, CN2650-8- -T,
CN2650 50 16 16 2AC 16 2AC, -8-2AC, CN26 - , CN2650- - -T, CN2650- -
CN2650I 2AC 16 16 2AC, CN2650I-8, CN2650I-8- , CN2650I- , CN2650I- - -
8- - - - - HV T, CN2650I 16 HV T.
Package Checklist
The CN2600 -Ldual AN terminal server products are shipped with the
following items:
• S 1 CN2600 eries terminal server
• c * Power ord (AC models only)
• - - 1 DB9 serial cable (CBL RJ45F9 150)
• - - 1 DB25 serial cable (CBL RJ45M25 150)
• Rackmount kit (includes 2 brackets and 8 screws)
• i g Quick nstallation uide (this guide)
*Power cords are available with US, Euro, UK, and JP plugs.
Hardware Introduction
NOTE
The wide temperature models do not come with the LCM
display panel and push buttons. The LCM description below
applies only to standard temperature models.
Front Panel
LED
Color
Description
Reset
None
Press the Reset button for 5 seconds to load
factory defaults. The CN26 beep twice 00 will
when the configuration has been reset.
Ready
Red
Used for configuring the IP address and other
parameters.
G reen
Lights up when the CN2600 system is ready.
Serial Tx
Green
Flashes to indicate serial port transmission.
Serial Rx
Yellow
Flashes to indicate serial port reception.
- - 3
Rear Panel
CN2650 16-
CN2650 16- - 2AC
CN2650I 16- - C 2A
CN2650I 16- - -T HV
LCM Display
If the CN26 is working properly, the LCM panel will display a green 00
color. The red Ready LED will also light up, indicating that the CN2600
is receiving power. After the red Ready LED turns to green, you will see
a display similar to the following: (Example)
C
N
2
6
1
0
-
1
6
_
3
1
9
2
.
1
6
8
.
1
2
7
.
2
5
4
CN2610 16- :
T 10’ he CN26 s name
03:
T 10’s he CN26 local sequence number
192.168.127.254:
T 10’ he CN26 s IP address
There are four push buttons on the CN2600 nameplate:
Button
Name
Action
MENU
menu
Activates the main menu, or returns to an
upper level.
up cursor
Scrolls up through a list of items shown on the
LCM panel’s second line.
down cursor Scrolls down through a list of items shown on
the LCM panel’s second line.
SEL
select
Selects the option listed on the LCM panel’s
second line.


Produktspezifikationen

Marke: Moxa
Kategorie: Server
Modell: CN2650I
Gewicht: 3740 g
Betriebstemperatur: 0 - 55 °C
Relative Luftfeuchtigkeit in Betrieb: 5 - 95 %
Anzahl Ethernet-LAN-Anschlüsse (RJ-45): 2
Temperaturbereich bei Lagerung: -20 - 70 °C
Konsolen-Port: RS-232
Rack-Einbau: Ja
Management-Protokolle: SNMP MIB-II
Abmessungen (BxTxH): 440 x 198 x 45 mm
Eingangsstrom: 0.235 @ 100VC, 0.145 @ 240VC A
Anzahl serielle Anschlüsse: 8

Brauchst du Hilfe?

Wenn Sie Hilfe mit Moxa CN2650I benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Server Moxa

Bedienungsanleitung Server

Neueste Bedienungsanleitung für -Kategorien-