Moxa CN2610 Bedienungsanleitung

Moxa Server CN2610

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Moxa CN2610 (6 Seiten) in der Kategorie Server. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/6

P/N: 180202600021A

* *180202600021A

CN2600 Series

Quick Installation Guide

Version 6.4 1 , June 202

Technical Support Contact Information

www.moxa.com/support



21 . A20 Moxa Inc ll rights reserved.

- - 2

Overview

The Moxa CN2600 dual-LAN terminal servers have 8 or 16 RS- or 232

RS 232/422/485- ports and dual 10/100 Mbps Ethernet LAN ports, and

some models come with dual AC power inputs. The CN2600 terminal

servers are used to connect terminals, modems, printers, and other

serial devices to LAN hosts, and all models comply with TCP/IP and

IEEE 802.3 specifications using standard twisted pair 10/100BaseTX

cable as the transmission medium.

CN2600 Series Models

The CN2600 Series includes the following models: - -CN2610 8, CN2610

8- -2AC 10, CN26 16, CN2610 16 2AC- - , CN2650 2AC-8, CN2650-8- -T,

CN2650 50 16 16 2AC 16 2AC, -8-2AC, CN26 - , CN2650- - -T, CN2650- -

CN2650I 2AC 16 16 2AC, CN2650I-8, CN2650I-8- , CN2650I- , CN2650I- - -

8- - - - - HV T, CN2650I 16 HV T.

Package Checklist

The CN2600 -Ldual AN terminal server products are shipped with the

following items:

• S 1 CN2600 eries terminal server

• c * Power ord (AC models only)

• - - 1 DB9 serial cable (CBL RJ45F9 150)

• - - 1 DB25 serial cable (CBL RJ45M25 150)

• Rackmount kit (includes 2 brackets and 8 screws)

• i g Quick nstallation uide (this guide)

*Power cords are available with US, Euro, UK, and JP plugs.

Hardware Introduction

NOTE

The wide temperature models do not come with the LCM

display panel and push buttons. The LCM description below

applies only to standard temperature models.

Front Panel

LED

Color

Description

Reset

None

Press the Reset button for 5 seconds to load

factory defaults. The CN26 beep twice 00 will

when the configuration has been reset.

Ready

Red

Used for configuring the IP address and other

parameters.

G reen

Lights up when the CN2600 system is ready.

Serial Tx

Green

Flashes to indicate serial port transmission.

Serial Rx

Yellow

Flashes to indicate serial port reception.

- - 3

Rear Panel

CN2650 16-

CN2650 16- - 2AC

CN2650I 16- - C 2A

CN2650I 16- - -T HV

LCM Display

If the CN26 is working properly, the LCM panel will display a green 00

color. The red Ready LED will also light up, indicating that the CN2600

is receiving power. After the red Ready LED turns to green, you will see

a display similar to the following: (Example)

CN2610 16- :

T 10’ he CN26 s name

03:

T 10’s he CN26 local sequence number

192.168.127.254:

T 10’ he CN26 s IP address

There are four push buttons on the CN2600 nameplate:

Button

Name

Action

Activates the main menu, or returns to an

upper level.

up cursor

Scrolls up through a list of items shown on the

LCM panel’s second line.

down cursor Scrolls down through a list of items shown on

the LCM panel’s second line.

SEL

select

Selects the option listed on the LCM panel’s

second line.

Produktspezifikationen

Marke:	Moxa
Kategorie:	Server
Modell:	CN2610
Gewicht:	3760 g
Betriebstemperatur:	0 - 55 °C
Relative Luftfeuchtigkeit in Betrieb:	5 - 95 %
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	2
Temperaturbereich bei Lagerung:	-20 - 70 °C
Konsolen-Port:	RS-232
Rack-Einbau:	Ja
Management-Protokolle:	SNMP MIB-II
Abmessungen (BxTxH):	440 x 198 x 45 mm
Eingangsstrom:	0.235 @ 100VC, 0.145 @ 240VC A
Anzahl serielle Anschlüsse:	8