Moxa CN2510 Bedienungsanleitung

Moxa Server CN2510

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Moxa CN2510 (7 Seiten) in der Kategorie Server. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/7

P/N: 1802025001013

*1802025001013*

CN2510 Series

Quick Installation Guide

Vers 20ion January 7.2, 21

Technical Support Contact Information

www.moxa.com/support



2 . A20 1 Moxa Inc ll rights reserved.

- - 2

Overview

Welcome to the Moxa CN2510 Async Server, a communication server

with 8/16 asynchronous RS-232 ports and 1 10/100 Mbps Ethernet LAN

port. The CN2510 Async Server can be used to connect terminals,

modems, printers, and other asynchronous serial devices to LAN hosts.

The CN2510 complies with TCP/IP and IEEE 802.3 specifications using

standard Ethernet 10/100 cable as BaseT X and twisted pair 10/100BaseT

the physical medium.

Package Checklist

CN2510 Async Server products are shipped with the following items:

• CN2510 Async Server

• -8 - ) AC power cord (only for the CN2510 and CN2510 16

• l t RJ45 oopback ester

• Rackmount kit, including 2 brackets and 8 screws

• - - CBL RJ45F9 150

• - - CBL RJ45M25 150

• i g Quick nstallation uide (printed)

• Warranty card

Optional Accessories

• - - 8- m CBL RJ45M9 150: pin RJ45 to ale DB9 cable, 150 cm

• - - 8- f CBL RJ45F9 150: pin RJ45 to emale DB9 cable, 150 cm

• - - 8- m CBL RJ45M25 150: pin RJ45 to ale DB25 cable, 150 cm

• - - 8- f CBL RJ45F25 150: pin RJ45 to emale DB25 cable, 150 cm

NOTE: Please n sales represotify your Moxa entative if any of the above

items are missing or damaged.

Hardware Introduction

Front Panel

LED

Color

Description

Reset

None

If you forget the password, use a pointed object,

such as a straightened paper clip or toothpick, to

press the reset button. The Ready LED will blink

on and off while the factory default settings are

being loaded. O

nce the Ready LED stops blinking

(after about 5 seconds), release the reset button.

You will hear a beep, which indicates that the

default settings have been restored, and the

CN2510 has rebooted.

Ready

Red

Power is on and the CN2510 is booting up.

Ready

Green

Power is on and the CN2510 is ready.

Serial Tx

Green

Serial port is transmitting data.

Serial Rx

Yellow

Serial port is receiving data.

- - 3

Rear Panel

Connector

Function

AC Power Input

Automatic detection of 100- - 240V, 47 63 Hz AC

power supply (CN25 - 5 - . 10 8 and CN2 10 16)

Automatic detection of ±48 VDC

(38 to 72 VDC,

- - 38 to 72 VDC) power supply (CN25 -8-10 48V

and CN25 - - 10 16 48V)

Power On/Off Switch

I indicates power on,

O indicates power off

RS- 232 Console Port One RJ45 connector for console terminal

connection

LAN

Auto detecting 10/100 Mbps port

Serial Ports

8 or 16 RJ45 connector for DCEs ) (modem

connections

LCM Display

We recommend using the LCM display and four push buttons to configure

the IP address for the first time.

Basic Operation:

If the CN2510 is working properly, the LCM panel will display a green color.

The red Ready LED will also light up, indicating that the CN2510 is

receiving power. After the red Ready LED turns to green, you will see a

display similar to:

This is where:

• CN25 -10 16 is the CN2510’s name

• 3is this CN2510’s local sequence number

• 192.168.127.254 is the CN2510’s IP address

There are four push buttons on CN2510’s nameplate. Going from left to

right, the buttons are:

Button

Name

Action

activates the main menu, or returns to an upper

level

up cursor

scrolls up through a list of items shown on the

LCM panel’s second line

down cursor

scrolls down through a list of items shown on the

LCM panel’s second line

SEL

select

selects the option listed on the LCM panel’s

second line

As you move through the various functions and setting options, note that

the top line shows the current menu or submenu name, and the bottom

line shows the submenu name or menu item that is activated by pressing

the SEL button.

Refer to the CN2510 Async Server User’ s Manual for more details.

Produktspezifikationen

Marke:	Moxa
Kategorie:	Server
Modell:	CN2510
Gewicht:	3340 g
Betriebstemperatur:	0 - 55 °C
Relative Luftfeuchtigkeit in Betrieb:	5 - 95 %
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	1
Temperaturbereich bei Lagerung:	-20 - 70 °C
Luftfeuchtigkeit bei Lagerung:	5 - 95 %
Konsolen-Port:	RS-232
Rack-Einbau:	Ja
Management-Protokolle:	SNMP MIB-II
Abmessungen (BxTxH):	440 x 198 x 45 mm
Eingangsstrom:	0.260 A
Anzahl serielle Anschlüsse:	8