Motorola Talkabout T800 Bedienungsanleitung

Motorola Radio Talkabout T800

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Motorola Talkabout T800 (4 Seiten) in der Kategorie Radio. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

TALKABOUT ® TWO-WAY RADIO T8XX

SERIES

*MN004193A01*

MN004193A01-AB

MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo

are trademarks or registered trademarks of Motorola Trademark Holdings,

LLC and are used under license. All other trademarks are the property of

Printed in

Caution

Before using this radio, read this booklet which contains

important operating instructions.

For information on product details, brochures, user manuals and

approved accessories. Please refer to

www.motorolasolutions.com.

Compliance with RF Exposure Standards

National and international regulations require manufacturers to

comply with the RF energy exposure limits for portable two-way

radios before they can be marketed. Your Motorola Solutions

two-way radio is designed, manufactured, and tested to comply

with all applicable national and international regulations for

human exposure to radio frequency electromagnetic energy.

RF Energy Exposure Awareness and Control

Information and Operational Instructions for

General Population and Uncontrolled Environment

Use

For more information on what RF energy exposure is, see the

following websites:

• https://www.fcc.gov/

• http://www.who.int/peh-emf/project/en/

For additional information, see https://

www.motorolasolutions.com/en_us/about/ company-overview/

corporate-responsibility/governance-and-policies/

wirelesscommunication-and-health-faqs.html.

FCC Licensing Information

For a Class B digital device or peripheral, the instructions

furnished the user shall include the following or similar

statement, placed in a prominent location in the text of the

manual:

Note:This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions,

may cause harmful interference to radio communications.

However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician

for help.

Operating Instructions

• Transmit no more than 50% of the time. To transmit (talk),

press the Push-To-Talk (PTT) button. To receive calls,

release the PTT button.

• Hold the radio in a vertical position in front of the face with

the microphone (and other parts of the radio including the

antenna) at least 1 in. (2.5 cm) away from the nose or lips.

Antenna should be kept away from the eye.

• When worn on the body, always place the radio in a

Motorola Solutions-approved clip, holder, holster, case, or

body harness for this product.

• DO NOT hold the antenna when the radio is transmitting.

• DO NOT use any portable radio that has a damaged

antenna. If a damaged antenna comes into contact with

your skin, a minor burn can result.

• To ensure continued compliance with applicable RF

exposure limits, use only Motorola Solutions-approved,

supplied or replacement antennas, batteries, and

accessories.

• For a list of Motorola Solutions-approved accessories

please refer to your user manual or visit

www.motorolasolutions.com

Acoustic Safety

Exposure to loud noises from any source for extended periods

of time may temporarily or permanently affect your hearing. The

louder the volume of the radio, the sooner your hearing will be

affected. Hearing damage from loud noise is sometimes

undetectable at first, and can have a cumulative effect.

To protect your hearing, follow these precautions:

• Use the lowest volume necessary to do your job.

• Turn up the volume only if you are in noisy surroundings.

• Turn down the volume before putting on a headset or

headphones.

• Limit the amount of time you use a headset or

headphones at high volume.

• When using the radio without a headset or headphones,

do not place the speaker of the radio directly against your

ear.

Medical Devices

If you use a personal medical device, such as a pacemaker or

hearing aid, consult the manufacturer of your device to

determine if it is adequately shielded from RF energy. Your

physician may be able to assist you in obtaining this information.

Operational Warnings

The following explains the operational warnings:

For Vehicle With Air Bags

Potentially Explosive Atmospheres

Blasting Caps and Blasting Areas

Batteries

• Charge your battery using the approved Motorola

Solutions charger.

• Use the battery in accordance with its water and/or dust

Ingress Protection (IP) rating.

• DO NOT discard your battery into a fire.

• DO NOT replace the battery in any area labeled

“Hazardous Atmosphere”.

• DO NOT disassemble, crush, puncture, shred, or

otherwise attempt to change the form of your battery.

• DO NOT dry a wet or damp battery with an appliance or

heat source, such as a hair dryer or microwave oven.

• DO NOT allow conductive material such as jewelry, keys,

or beaded chains to touch exposed battery terminals.

Do Not Substitute Options or Accessories

The Motorola Solutions communications equipment certified as

intrinsically safe by the approving agency (FM, UL, CSA,

CENELEC) is tested as a complete system which consists of the

listed agency approved portable, approved battery, and

approved accessories or options, or both. This approved

portable and battery combination must be strictly observed.

There must be no substitution of items, even if the substitute

has been previously approved with a different Motorola

Solutions communications equipment unit. Approved

configurations are listed by the approving agency (FM, UL,

CSA, CENELEC).

The Intrinsically Safe Approval Label affixed to radio refers to

the intrinsically safe classification of that radio product, and the

approved batteries that can be used with that system.

The manual PN referenced on the Intrinsically Safe Approval

Label identifies the approved accessories and or options that

can be used with that portable radio unit.

Using a non-Motorola Solutions-intrinsically safe battery and/or

accessory with the Motorola Solutions-approved radio unit will

void the intrinsically safe approval of that radio unit.

Notice to Users (FCC and Industry Canada)

This device complies with Part 15 of the FCC rules and Industry

Canada’s license-exempt RSS’s per the following conditions.

• This device may not cause harmful interference.

• This device must accept any interference received,

including interference that may cause undesired

operation.

• Changes or modifications made to this device, not

expressly approved by Motorola Solutions, could void the

authority of the user to operate this equipment.

USA (FCC)/CANADA (ISED)

According to FCC Part 95, FRS devices do not require a

license. Use of Motorola radio in Canada is subject to the rules

and regulations in ISED RSS 210 and do not require a license.

Changes or modifications not expressly approved by Motorola

Solutions may void the user authority granted by the FCC or

ISED to operate this radio and should not be made. To comply

with FCC or ISED requirements, transmitter adjustments should

be made only by or under the supervision of a person certified

as technically qualified to perform transmitter maintenance and

repairs in the private land mobile and fixed services as certified

by an organization representative of the user of those services.

Replacement of any transmitter component (crystal,

semiconductor, etc) not authorized by the FCC or ISED

equipment authorization for this radio could violate FCC or ISED

rules.

Note: Use of this radio outside the country where it was

intended to be distributed is subject to government

regulations and may be prohibited

Note: The radio screen dims five seconds after the last button is

pressed. Radio screen turns off after another five seconds

for battery saving purposes, with only LED blinking. Press

any button (except Flashlight button) to resume the

display.

Weatherproof

This radio is weatherproof to IP-x4 standards. It is splash-proof

from any direction. The radio is resistant to water and rain

splashes only when the battery cover, headset accessory port,

and micro-USB ports are sealed. Open the battery compartment

door or headset port cover only when the radio is dry. Use of a

headset accessory should be in dry environments only.

The micro-USB adaptor is not weatherproof. Therefore:

• DO NOT expose to rain or snow.

• Charge the radios only in a dry location.

• DO NOT charge wet radios.

Personalization Stickers

16 stickers provided in order to personalize and keep track of

the radios. Use permanent marker for the blank stickers.

Installing the Batteries

Discard the retailer tag (loose in one of the battery

compartments) before installing the batteries. Each radio can

use either one NiMH rechargeable battery pack or three AA

alkaline batteries and beeps when the batteries are low.

1. Turn the radio off.

2. With the back of the radio facing you, push the latch on

battery cover to the left to unlock the battery cover.

3. For NiMH battery pack, insert the battery pack by following

the instruction on the battery pack. Observe the polarity.

For AA alkaline batteries, insert the batteries and observe

polarity.

4. The ribbon should be underneath the battery pack or

batteries and must wrap around the right side of the pack

or batteries for easy removal.

5. Close the battery cover and push the latch to the right to

lock the battery cover.

Radio Battery Meter

The number of bars (0–3) on the Radio Battery icon shown

indicates the charge remaining in the battery. When the radio

battery meter shows one segment left, the radio chirps

periodically or after releasing the PTT button (Low Battery

Alert).

Battery Capacity Maintenance

1. Charge the NiMH batteries once every 3 months when not

in use. After longer lapse, the start of charging in radio will

be delayed and can take up to five minutes.

2. Before placing the radio in storage, remove the battery.

3. Batteries corrode over time and may cause permanent

damage to your radio.

4. Store the NiMH batteries in temperature between -20 °C to

35 °C and in low humidity. Avoid damp conditions and

corrosive materials.

Using the Micro-USB Charger

The micro-USB charger allows you to conveniently charge your

NiMH battery pack.

1. Power OFF your radio before you start charging.

2. Plug the micro-USB cable into the micro-USB charging

port on your radio. Connect the other end of the micro-

USB charger to wall power outlet.

3. An empty battery will be fully charged in 11 hours.

4. The battery meter bar will scroll when the battery is

charging.

Note:

• When moving between hot and cold temperatures, do not

charge the NiMH battery pack until the battery

temperature acclimates (usually about 20 minutes).

• For optimal battery life, remove the radio from the charger

within 16 hours. Do not store the radio while connected to

the charger.

Attaching and Removing the Belt Clip

1. Attach the belt clip to the belt clip slot at the back of the

radio until the clip clicks in place.

2. Attach the belt clip to pocket or belt strap until the clip

clicks in place.

To Remove

1. Pull the release tab on top of the belt clip to release the

latch.

2. Push the belt clip with the other hand towards the top of

radio.

Turning your Radio On and Off

1. To turn your radio ON, turn the rotary knob clockwise.

2. In the ON position, the radio chirps and briefly shows all

feature icons available on the radio.

3. The display screen then shows the current channel, code

and all features that are enabled. The radio is now in

Two-Way mode.

4. To turn your radio OFF, turn the rotary knob

counterclockwise.

Setting the Volume

From any mode, to increase volume is by turning the rotary

knob clockwise. To decrease volume, turn the rotary knob

counterclockwise.

Note: DO NOT hold the radio close to your ear. If the volume is

set to an uncomfortable level, it could hurt your ear.

To communicate, all radios in your group must be set to the

same channel and Interference Eliminator Code.

1. Press and hold the PTT button to talk. When transmitting,

screen displays icon and blinks icon.

it is a high power transmission, icon is displayed. If it is a

low power transmission, icon is displayed. Screen will

time out except , / and battery icons. These will

remain lit until PTT button is released.

2. When you are finished talking, release the button.PTT

3. When receiving, icon blinks and is

shown. If it is a high power channel, is shown. If it is a

low power channel, is shown.

For maximum clarity, hold the radio one inch away from your

mouth and speak directly into the microphone. Do not cover the

microphone while talking.

Talk Range

Your radio is designed to maximize performance and improve

transmission range. Do not use the radios closer than 5 ft apart.

Power Boost

To boost the power of your radio to high power, press the top

portion of the button when talking (labeled PTT H). If you know

your party is close by, you can conserve the energy of your

battery by pushing the lower part of the PTT button to use less

power (labeled L).

Note: If you are on an 467 MHz channel (see “Channels and

Frequencies”) the radio uses low power when either

portion of the PTT button is pressed.

Monitor Button

Press and hold Scan/Monitor button for three seconds to

enter Monitor mode and listen for weak signals on the current

channel. You can also listen to the volume level of the radio

when you are not receiving. This allows you to adjust the

volume, if necessary.

Push-to-Talk Timeout Timer

To prevent accidental transmissions and save battery life, the

radio emits a continuous warning tone and stops transmitting if

you press the PTT button for more than 60 continuous seconds.

Mode Button

By pressing Mode button, the user will be seamlessly switching

between two-way and weather mode. When radio is in two-way

mode, will be shown. When radio is in weather

mode, will be shown. Corresponding setting and

information will be shown on the display.

Selecting the Channel

Your radio has 22 channels. The channel is the frequency the

radio uses to transmit. (See the “Channels and Frequencies”

table on overleaf for details).

1. With the radio on, press button until the Menu/Lock

channel number starts to flash. When the radio is on a

0.5 W channel, display shows . When the radio is on a

2 W channel, display shows . The current channel

flashes.

2. Press or to change the channel. Long press on

these keys allows you to scroll through the channels

rapidly.

3. Press the PTT button to save the channel setting and exit

Menu or Menu/Lock button to continue set up.

Selecting the Interference Eliminator Code

Interference Eliminator Codes help minimize interference by

blocking transmissions from unknown sources. Your radio has

121 Interference Eliminator Codes. Codes 1–38 are standard

analog codes that appear on other FRS radios. Codes 39–121

are additional digital codes added for superior interference

protection. 0 is the off position, no analog or digital codes are

enabled.

To set the code for a channel:

1. Press Menu/Lock button until the code starts to flash.

2. Press or to select the code. Long press on these

keys allows you to scroll through the codes rapidly.

3. Press the PTT button to save the code setting and exit

Menu or Menu/Lock button to continue set up.

You can set a different code for each channel using this

procedure.

Note: On a radio that uses Interference Eliminator Codes, the

code must be set to 0 to communicate with radios that do

not have Interference Eliminator Codes. Select 0 for “no

tone, no code” on the display of your radio.

Bluetooth®

The radio uses Bluetooth LE version 4.2 and is compatible with

smartphones with IOS version 9 onwards and Android version

4.3 onwards.

The Bluetooth enables the connection between radio and

smartphone. Once your smartphone is connected to your radio

over Bluetooth, the Talkabout smartphone app enables

communication options beyond push-to-talk on the radio. The

Talkabout app uses the T8xx as a modem to send messages,

locations and others through the radio frequencies to the other

T8xx users.

The Bluetooth enables data transmissions, it does not enable

audio transmission from phone to radio or vise versa, nor is it

used for connection to a Bluetooth headset.

Turn ON Bluetooth on your radio to connect with Talkabout APP

installed on your smart phone. Make sure Bluetooth on your

smart phone is turned ON.

1. Press Menu/Lock until appears. The current

Bluetooth setting will flash.

2. Press or to change the setting.

3. Press the PTT button to set and exit menu or button to

continue set up.

4. Once Bluetooth is turned ON, the glows static for five

seconds, then move to “Waiting to be Paired” mode.

5. In “Waiting to be Paired” mode, flashes fast for 90

seconds before switching OFF to save battery life. Before

it switches off, you will get two warning alerts (one beep at

60 seconds and two beeps at 90 seconds) before

Bluetooth turns OFF. Follow the instructions in Talkabout

app menu ( icon) 'Bluetooth connection' to pair your

radio.

6. If pairing is successful, the glows static for three

seconds, then move into “Bluetooth connected” mode.

7. When Bluetooth is connected, the will continue blinking

slowly.

Note: Once radio and phone are paired, re-pairing happens

automatically as long as Bluetooth on radio is turned on.

To pair to other phone, follow the steps in Talkabout App

menu to unpair. When Bluetooth connection between

radio and phone is lost for more than 90 seconds, the

Bluetooth on radio is turned off to preserve battery life

(see step 5) and follow step 1 to step 3 to turn back on.

Setting and Transmitting Call Tones

Your radio can transmit different call tones to other radios in

your group so you can alert them that you want to talk. Your

radio has 20 call tones from which to choose.

To set a call tone:

1. Press Menu/Lock until appears. The current call

tone setting will flash.

2. Press or to change and hear the call tone.

3. Press the button to set the new call tone and exit PTT

Menu or Menu/Lock button to continue set up.

To transmit your call tone to other radios set up to the same

channel and Interference Eliminator Code on your radio, and

press Call Tone button.

Note: Setting the call tone to 0 disables the call tone feature.

Internal Voice Operated Transmission/Voice

Operated Transmission ( / )

Transmission is initiated by speaking into the microphone of the

radio/audio accessory instead of pushing the PTT button.

Safety and General Information

Warning:

• Refer to vehicle manufacturer's manual

prior to installation of electronic equipment

to avoid interference with air bag wiring.

• DO NOT place a portable radio in the area

over an air bag or in the air bag deployment

area. Air bags inflate with great force. If a

portable radio is placed in the air bag

deployment area and the air bag inflates,

the radio may be propelled with great force

and cause serious injury to occupants of the

vehicle.

Warning:

• Use of a radio that is not intrinsically safe in

a potentially explosive atmosphere could

result in a serious injury, or death. You

should only use a certified Intrinsically Safe

radio in potentially explosive atmospheres.

• Explosive atmospheres refer to hazard

classified locations that may contain

hazardous gas, vapors, dusts, such as

fueling areas below decks on boats, fuel, or

chemical transferor storage facilities, and

areas where the air contains chemicals or

particles such as grain, dust, or metal

powders. Areas with potentially explosive

atmospheres are often, but not always,

posted.

• Turn off your radio prior to entering any area

with a potentially explosive atmosphere

unless it is a radio type specifically certified

for use in hazardous location areas.

• DO NOT remove, install, or charge batteries

in such areas, or remove or install

antennas. Sparks in a potentially explosive

atmosphere can cause an explosion or fire

resulting in bodily injury or even death.

Warning: To avoid possible interference with

blasting operations, turn off your radio when you

are near electrical blasting caps, in a blasting

area, or in areas posted: “Turn off two-way radio.”

Obey all signs and instructions.

W A R N I N G

Licensing Information

Control Buttons

Emergency Button

Flashlight Button

Push-to-Talk (High)

Push-to-Talk (Low)

Mode Button

Menu/Lock

Easy Pairing/Location

Sharing Button

Hidden Segmented

LED Display

Scan/Monitor

Call Tone

Scroll

Microphone

Speaker

Power/Volume

Knob

Space for Personalization

Stickers

Antenna

Accessory Port

Micro-USB

Charging Port

Display Screen GuideDisplay Screen Guide

Mode Channel

Battery (3 Battery

Levels)

Weather Alert

Status

(Transmit/Receive)

Vibracall [On/Off]

iVOX [OFF, L1, L2, L3]

VOX [OFF, L1, L2, L3]

Bluetooth [On/Off]

Roger Tone [On/Off]

Dual Watch [On/Off]

Keypad Tone [On/Off]

Easy Pairing [On/Off]

Call Tone [number]

Scan

Power (High-Low)

Interference Eliminator Code

Number (used for Call Tone)

On/Off

OFF/L1/L2/L3 (used for iVOX and VOX)

Keypad Lock

Getting Started

Talking and Listening

Menu Options

Two Way Mode

Weather Mode

Menu Butt on

Weather Channel (1-11)

Menu Butt on

Weather Alert (On/Off)

Menu Butt on

Mode Butt on

Two Way Mode

Channel (1-22)

Interference Eliminator Code (0-121)

Call Tone (1-20)

Hands Free (iVOX ) (Off, L1,L2,L3) 92;

Dual Watch Channel (1-22)

Dual Watch Interference

Eliminator Code (1-121)

VibraCall Alert (On/Off)

Keypad Tones (On/Off)

Talk Confirmation Tones (On/Off)

Menu Butt on

%OXHWRRWK 2Q2II( )

Menu Butt on

L3 = High Sensitivity for quiet environments

L2 = Medium Sensitivity for most

environments

L1 = Low Sensitivity for noisy environments

1 2 3 4 5 6

MN004193A01_en-US.fm Page 2 Friday, November 9, 2018 5:26 PM

1. Press Menu until the icon appears on the

display. When audio accessory is connected, the

icon will be shown. The current setting (Off, L1–L3) will

flash.

2. Press or to select the sensitivity level.

3. Press the PTT button to exit menu or Menu to continue

set up.

Note:When using iVOX/VOX, there will be a short delay.

Dual Watch Mode

Enables you to scan the current channel and another channel

alternately.

To set another channel and start Dual Watch.

1. Press Menu/Lock until appears. The will

flash.

2. Press or to select the channel, then press .

3. Press or to select the code.

4. Press the PTT button or wait until the time out to activate

Dual Watch. The screen will alternate between Home

Channel and Dual Watch Channel.

5. To end Dual Watch mode, Press icon.

Note: If you set the same channel and code as current channel,

Dual Watch does not work.

VibraCallTM Alert

VibraCallTM is a vibrating alert that notifies you that your radio is

receiving a message. This is useful in noisy environments. The

Vibrate Alert will be triggered when you received a call. It will

then only be triggered again if there is no activity within 30

seconds after the previous call.

1. To turn vibrating alerts on, press Menu/Lock button

until is displayed. The current setting will flash.

2. Press or to change the setting to On/Off.

3. Press the PTT button to confirm and exit Menu or

Menu/Lock button to continue set up.

Keypad Tones

You may enable or disable the speaker key tones. You will hear

the key tone each time a button is pushed.

1. Press Menu/Lock button until appears. The

current setting On/Off will flash.

2. Press either or to turn On or Off.

3. Press the PTT button to confirm and exit Menu or

Menu/Lock button to continue set up.

Note: When the keypad tone feature is off, the following are not

disabled:

• Transmit timeout alert tone

• Call tone

• Low battery alert tone or

• The transmitted talk confirmation tone

Transmitting a Talk Confirmation Tone

You can set your radio to transmit a unique tone when you finish

transmitting. It is like saying “Roger” or “Over” to let others know

you are finished talking.

1. Press Menu/Lock button until the appears. The

current setting On/Off flashes.

2. Press or to turn On or Off.

3. Press the PTT button to set and exit Menu or to

continue set up.

Installing Talkabout App on your smartphone and connecting

your smartphone to your radio over bluetooth allows you to

share your location and text messaging, even without cell phone

service. In addition, it offers recording tracks and controlling the

radio settings from the convenience of your smartphone. This

app is free and can be downloaded at the App Store for IOS

devices and Google Play for Android devices. Search for

Motorola Talkabout App. User instructions for the app are

embedded in the app.

Emergency Alert Mode

The Emergency Alert feature can be used to signal members in

your group of your need for urgent help. T800 series radios will

operate in an automatic “hands-free” emergency control mode

for a total of 30 seconds after activating the Emergency Alert.

T800 series radios in your group will automatically advance the

speaker volume to the maximum setting and sound a warbling

alert tone for 8 seconds. The alert tone is emitted from your own

radio speaker and the receiving radios in your group. After the 8

second alert, any spoken words or incidental sounds at your end

will be transmitted to the group for 22 seconds. For the 30

second duration of Emergency Alert mode, T800 series radio

controls and buttons will be locked to maximize reception of the

emergency message.

1. Press and hold the Emergency Alert button for 3

seconds.

2. Release the button and the alert tone begins to sound.

There is no need to continue to hold the Emergency Alert

button or use PTT for your message to be transmitted.

3. After the alert tone ends you may speak into the

microphone. Your voice or incidental sounds will be

transmitted.

4. After 30 seconds your radio speaker will emit a Talk

Confirmation Tone. Operation then returns to normal

two-way mode.

5. If your radio is connected to Talkabout APP when an

Emergency Alert is triggered, S.O.S message that is pre-

saved in your Talkabout APP is sent out to everyone in

range that have Talkabout APP and are connected with

the app. You must have Talkabout APP connected to

receive your S.O.S message. Refer to Talkabout APP in

radio setting to customize S.O.S message.

Note: All Motorola Solutions Talkabout EM, MJ, MR, MT, MU,

T400, T500, T600, T800 series radio (except for model

T400) are fully compatible with the Emergency Alert

feature. Radios other than EM, MJ, MR, MT, MU, T400,

T500, T600, T800 series can receive the emergency alert

signal, but will not respond with adjusted volume settings,

locked controls or a warbling alert tone. Users of other

radio models set to the same channel and Interference

Eliminator Code will hear a steady tone for eight seconds

followed by the voice transmission for 22 seconds.

Built-in LED Flashlight

1. Press the flashlight button to turn the light ON.

2. Press the flashlight button again to turn the light OFF.

Note: Turn off the flashlight when not in use to conserve battery

power.

Keypad Lock

To avoid accidentally changing your radio settings:

1. Press and hold Menu/Lock button until displays.

2. When in lock mode, you can turn the radio ON and OFF,

adjust the volume, receive, transmit, send a call tone,

send Emergency Alert, turn the LED flashlight ON and

OFF, and monitor channels. All other functions are locked.

3. To unlock the radio, press and hold Menu/Lock button

until is no longer displayed.

Easy Pairing and Location Sharing Button

This button has dual functionalities:

A. Easy Pairing

The Easy Pairing feature allows a group of radio users to

program all their radios to the same Channel and Interference

Eliminator Code settings quickly and simultaneously. Any one

radio within the group can be designated as the “Leader’s radio”

and have it’s Channel and Interference Eliminator Code settings

transmitted to and copied by all the other radios in the group

(Members’ radios).

1. Pick any one of the radios as the “Leader’s radio”. On this

radio, program the Channel and Interference Eliminator

Code to the desired settings.(See “Selecting the Channel”

and “Selecting the Interference Eliminator Code” sections

in this user manual).

2. To copy the channel and Interference Eliminator Code

combination to all the other “Members’ radios”, press and

hold the button on the Members’ radios until you hear a

beep. Release the button after the beep, and wait for the

transmission from the Leader’s radio.

Note:

• You will see the icon blinking on the display. This

confirms that the radio is in Easy Pairing mode waiting to

receive the Channel and Interference Eliminator Code

settings from the Leader’s radio. All Members’ radios will

remain in this mode for 3 minutes.

• A group with many radios should have all users take this

step at the same time, so all radios can be programmed in

one go.

3. On the Leader’s radio, press and hold down the button

until you hear a double beep.

Note:

• At the double beep, this radio’s Channel and Interference

Eliminator Code settings will be transmitted, which will be

received and copied by all the other (Members’) radios.

• The Leader’s radio must make this transmission when all

the Members’ radios are still in the Easy Pairing mode,

otherwise the transmission will not be picked up.

• On the Leader’s radio, user must remember NOT to

release the button on the first (single) beep, otherwise this

radio will become another Member’s radio. If that

happens, you can press PTT to escape, and retry step 3.

B. Location Sharing

Short press once to share and request location update. This

functionality is only activated when paired over Bluetooth to your

smartphone.

Note:The FCC does not allow automatic location sharing,

therefore the user needs to share and request a location

update manually. Location updates can be requested

from within the Talkabout App or simply by short pressing

this button.

Scanning Channels

Use scan to search all channels for transmissions from

unknown parties, to find someone in your group who has

accidentally changed channels or to quickly find unused

channels for your own use.

There is a priority feature and two modes of scanning (basic and

advanced) to make your search more effective. The Basic Scan

mode uses the channel and code combinations for each of the

channels as you have set them (or with the default code value of

1). The “Advanced Scan” mode will scan all channels for any

and all codes, detect any code in use and use that code value

temporarily for that channel.

Priority is given to the “home channel”, that is, the channel (and

Interference Eliminator Code) your radio is set to when you start

the scan. This means the initial channel (and code settings) is

scanned more often than the other channels and your radio will

respond quickly to any activity occurring on the home channel

as a priority.

To start Basic Scanning:

1. Briefly press the Scan/Monitor button. The scan

will appear in the display and the radio will begin to scroll

through the channel and code combinations.

2. When the radio detects channel activity matching the

channel and code combination, it stops scrolling and you

can hear the transmission.

3. To respond and talk to the person transmitting, press the

PTT button within five seconds after the end of the

transmission.

4. The radio will resume scrolling through the channels 5

seconds after the end of any received activity.

5. To stop scanning, briefly press the Scan/Monitor

button.

To start Advanced Scanning:

1. Set the Interference Eliminator Code to “zero” or OFF.

2. Briefly press the Scan/Monitor button. The scan

will appear in the display and the radio will begin to scroll

through the channels. No Interference Eliminator Codes

will filter what is heard.

3. When the radio detects channel activity with ANY code (or

NO code), it stops scrolling and you can hear the

transmission. Any Interference Eliminator Code that may

be in use by that party will be detected and displayed.

4. To respond and talk to the person transmitting, press the

PTT button within 5 seconds of the end of the

transmission. The radio will transmit using the newly

detected Interference Eliminator Code.

5. The radio will resume scrolling through the channels 5

seconds after the end of any received activity.

6. To stop scanning, briefly press the Scan/Monitor

button.

Scanning Notes:

1. If you press the PTT button while the radio is scrolling

through inactive channels, the transmission will be on the

“home channel”. Scanning will resume five seconds after

the end of your transmission. You may press the

Scan/Monitor button to stop scanning at any time.

2. If the radio stops on an undesired transmission, you may

immediately resume the scan by briefly pressing or .

3. If the radio repeatedly stops on an undesired

transmission, you may temporarily remove that channel

from the scan list by pressing and holding or for 3

seconds. You may remove more than one channel in this

way.

4. To restore the removed channel(s) to the scan list, turn the

radio off and then turn back on, or exit and re-enter the

scanning mode by pressing Scan/Monitor button.

5. You cannot remove the home channel from the scan list.

6. In Advanced Scan, the detected code will only be used for

one transmission. You must note that code, exit scan and

set that detected code on that channel to permanently use

the detected code.

Your radio can tune in to broadcasts by the United States

National Oceanic and Atmospheric Administration (NOAA)

Weather Radio and Environment and Climate Change Canada

(ECCC) Weather Radio.You can listen to a weather channel

(see “Weather Channels and Frequencies” table for details) or

set your radio to alert you to emergency weather broadcasts

that interrupt routine broadcasts. When you listen to a weather

channel, you cannot use your radio in scan mode or for two-way

communications.

Both NOAA and ECCC have transmitters located throughout the

United States and Canada, respectively. These transmitters

broadcast watches, forecasts, and other information 24 hours a

day.

Note: NOAA weather radio stations are assigned to cover

specific areas and service may be limited. Please check

with your local weather office for frequency and details or

visit www.weather.gov/nwr in the US to view the

appropriate transmitter for your area. The use of the

NOAA logo does not provide an endorsement or implied

endorsement by the National Weather Service of NOAA,

nor does the use of the Weather Radio logo provide an

endorsement or implied endorsement by Environment

and Climate Change Canada (ECCC).

Entering Weather Mode

1. From two-way mode, press Mode button to enter

weather mode .

Setting the Weather Channel

Your radio receives weather frequencies:

1. In weather mode, press Menu/Lock button until

weather channel number flashes.

2. Press or to select the appropriate channel with good

reception in your area.

3. Press the PTT button to set and exit Menu or

Menu/Lock button to continue set up weather alert.

Setting the Weather Alert

Your radio can be set to respond to NOAA Weather Radio

emergency messages. A special alarm tone sounds an alert and

turns on the weather receiver to give you immediate weather

and emergency information.

1. In weather mode press Menu/Lock button twice until

displays.

2. Press or to select On/Off.

3. Press the PTT button or Menu/Lock button to exit the

weather menu set up.

4. Press Mode button to return to two-way mode. If you

activate Weather Alert and return to two-way mode

will display.

Note: When the weather channel is activated, either manually

or after receiving an alert, and no buttons are pressed for

5 minutes, the weather mode will automatically revert

back to two-way mode.

As with two-way radio reception, weather channel reception

depends on how close you are to a transmitter and whether you

are indoors or outdoors. Because weather channels are

transmitted without codes, they may contain static or noise.

Weather Alert will not function while actively transmitting or

receiving in two-way mode.

Weather Channels and Frequencies

This FRS device is approved for USA and Canada

Consumer Two-Way Radio Products and

Accessories purchased in the United States or

Canada

What Does this Warranty Cover?

Subject to the exclusions contained below, Motorola Solutions,

Inc. (“Motorola”) warrants the Motorola branded consumer two-

way radios that operate via Family Radio Service or General

Mobile Radio Service (“Products”), the Motorola branded or

certified accessories sold for use with these Products

(“Accessories”) to be free from defects in materials and

workmanship under normal consumer usage for the period(s)

outlined below. This limited warranty is the exclusive remedy of

a consumer, and applies as follows to new Products and

Accessories and purchased by consumers in the United States

or Canada, which are accompanied by this written warranty:

Who is Covered?

This warranty extends only to the first consumer purchaser, and

is not transferable.

What will MOTOROLA SOLUTIONS, INC. do?

Motorola Solutions, Inc., at its option, will at no charge repair,

replace or refund the purchase price of any Products or

Accessories that do not conform to this warranty. We may use

functionally equivalent reconditioned/refurbished/pre-owned or

new Products or Accessories.

What Other Limitations Are There?

Any Implied Warranties, Including Without Limitation. The

implied warranties of merchantability and fitness for a particular

purpose, shall be limited to the duration of this limited warranty,

otherwise the repair, replacement, or refund as provided under

this express limited warranty is the exclusive remedy of the

consumers, and is provided in lieu of all other warranties,

express or implied.

In no event shall Motorola Solutions be liable, whether in

contract or tort (including negligence) for damages in excess of

the purchase price of the product or accessory, or for any

indirect, incidental, special or consequential damages of any

kind, or loss of revenue or profits, loss of business, loss of

information or other financial loss arising out of or in connection

with the ability or inability to use the products or accessories to

the full extent these damages may be disclaimed by law.

Some states and jurisdictions do not allow the limitation or

exclusion of incidental or consequential damages, or limitation

on the length of an implied warranty, so the above limitations or

exclusions may not apply to you. This warranty gives you

specific legal rights, and you may also have other rights that

vary from state to state or from one jurisdiction to another.

How to Obtain Warranty Service or Other

Information?

To obtain service or information, please call

USA and Canada Two-Way Radios

1-800-448-6686.

www.motorolasolutions.com/talkabout

For Accessories:

Please call the telephone number designated above for the

Product with which they are used.

You will receive instructions on how to ship the Products or

Accessories at your expense, to Motorola Solutions or a

Motorola Solutions Authorized Repair Center. To obtain service,

you must include: (a) a copy of your receipt, bill of sale or other

comparable proof of purchase; (b) a written description of the

problem; (c) the name of your service provider, if applicable; (d)

the name and location of the installation facility (if applicable)

and, most importantly; (e) your address and telephone number.

For more information, please visit us at:

Talkabout App

Special Features

WARNING: The Emergency Alert feature should only be

used in the event of an actual emergency. Motorola

Solutions is not responsible if there is no response to the

emergency alert from the receiving group.

Weather Receiver

Weather Channel Frequency Weather Channel Frequency

WX1 162.550 MHz WX7 162.525 MHz

WX2 162.400 MHz WX8 161.650 MHz

WX3 162.475 MHz WX9 161.775 MHz

WX4 162.425 MHz WX10 161.750 MHz

WX5 162.450 MHz WX11 162.000 MHz

WX6 162.500 MHz

Channel Frequency Max Power

Output Channel Frequency Max Power

Output

1 462.5625 MHz 2 W 12 467.6625 MHz 0.5 W

2 462.5875 MHz 2 W 13 467.6875 MHz 0.5 W

3 462.6125 MHz 2 W 14 467.7125 MHz 0.5 W

4 462.6375 MHz 2 W 15 462.5500 MHz 2 W

5 462.6625 MHz 2 W 16 462.5750 MHz 2 W

6 462.6875 MHz 2 W 17 462.6000 MHz 2 W

7 462.7125 MHz 2 W 18 462.6250 MHz 2 W

8 467.5625 MHz 0.5 W 19 462.6500 MHz 2 W

9 467.5875 MHz 0.5 W 20 462.6750 MHz 2 W

10 467.6125 MHz 0.5 W 21 462.7000 MHz 2 W

11 467.6375 MHz 0.5 W 22 462.7250 MHz 2 W

Channels and Frequencies

Warranty

Products Covered Length Of Coverage

Products and

Accessories

as defined above, unless

otherwise provided for

below.

Two (2) years from the

date of purchase by the

first consumer purchaser

of the product unless

otherwise provided for

below.

Batteries

whose fully charged

capacity falls below 80% of

their rated capacity and

batteries that leak.

Ninety (90) days from the

date of purchase.

Products and

Accessories

that are repaired or

replaced.

The balance of the

original warranty or for

ninety (90) days from the

date returned to the

consumer, whichever is

longer.

Exclusions From Warranty Coverage

Normal Wear and Tear:

Periodic maintenance, repair and replacement of Products or

Accessories due to normal wear and tear.

Abuse & Misuse:

Defects or damage that result from: (a) improper operation,

storage, misuse or abuse, accident or neglect, such as

physical damage (cracks, scratches, etc.) to the surface of the

Products and Accessories resulting from misuse; (b) contact

with liquid, water, rain, extreme humidity or heavy perspiration,

sand, dirt or the like, extreme heat, or food; (c) use of the

Products or Accessories for commercial purposes or

subjecting the Product or Accessory to abnormal usage or

conditions; or (d) other acts which are not the fault of Motorola

Solutions.

Use of Non-Motorola Solutions branded Products and

Accessories:

Defects or damage that result from the use of Non-Motorola

Solutions branded or certified products, accessories, software

or other peripheral equipment.

Unauthorized Service or Modification:

Defects or damages resulting from service, testing,

adjustment, installation, maintenance, alteration, or

modification in any way by someone other than Motorola

Solutions or its authorized service centers.

Altered Products:

Products or Accessories with (a) serial numbers or date tags

that have been removed, altered or obliterated; (b) broken

seals or that show evidence of tampering; (c) mismatched

board serial numbers; or (d) nonconforming or non-Motorola

Solutions branded housings, or parts.

Communication Services:

Defects, damages, or the failure of Products or Accessories

due to any communication service or signal you may subscribe

to or use with the Products or Accessories.

https://www.facebook.com/

MotorolaTalkaboutWalkieTalkies

http://bit.ly/Talkabout

www.motorolasolutions.com/talkabout

Produktspezifikationen

Marke:	Motorola
Kategorie:	Radio
Modell:	Talkabout T800

Brauchst du Hilfe?

Wenn Sie Hilfe mit Motorola Talkabout T800 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Radio Motorola

Motorola T50 Bedienungsanleitung

28 September 2024

Motorola APX 8000XE Bedienungsanleitung

25 September 2024

Motorola Talkabout T600 Bedienungsanleitung

10 September 2024

Motorola MOTOTRBO R2 Bedienungsanleitung

31 August 2024

Motorola MOTOTRBO R7 Bedienungsanleitung

31 August 2024

Motorola MOTOTRBO Ion Bedienungsanleitung

31 August 2024

Motorola Talkabout T800 Bedienungsanleitung

30 August 2024

Motorola Talkabout T270 Bedienungsanleitung

7 August 2024

Motorola Talkabout T465 Bedienungsanleitung

6 August 2024

Motorola Talkabout T280 Bedienungsanleitung

6 August 2024

Bedienungsanleitung Radio

Neueste Bedienungsanleitung für -Kategorien-

Ruarkaudio Rseven Bedienungsanleitung

16 Oktober 2024

Ruarkaudio MR1 Bedienungsanleitung

16 Oktober 2024

Denver TWE-55B Bedienungsanleitung

15 Oktober 2024

AudioSonic CL-1486 Bedienungsanleitung

14 Oktober 2024

Sangean DPR-39 Bedienungsanleitung

14 Oktober 2024

Sangean RCR-9 Bedienungsanleitung

14 Oktober 2024

PerfectPro Dabbox Bedienungsanleitung

13 Oktober 2024

Uniden UH45CP Bedienungsanleitung

12 Oktober 2024

Sencor SIR 5000WDB Bedienungsanleitung

11 Oktober 2024

AEG KRC 4350 BT Bedienungsanleitung

10 Oktober 2024