Motorola Talkabout T482 Bedienungsanleitung

Motorola Radio Talkabout T482

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Motorola Talkabout T482 (2 Seiten) in der Kategorie Radio. Dieser Bedienungsanleitung war fĂĽr 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
m
TALKABOUT ® EMERGENCY
PREPAREDNESS TWO-WAY
RADIO T48X Series
*MN001399A01*
MN001399A01-AG
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks
or registered trademarks of Motorola Trademark Holdings, LLC and are used under
license. All other trademarks are the property of their respective owners.
© 2015 and 2020 Motorola Solutions, Inc. All rights reserved.
Printed in
For More Information
For further information, you may call Motorola Solutions at
1-800-448-6686 (Canada and U.S.), or visit us on the Internet at
www.motorolasolutions.com/talkabout.
Caution
Before using this radio, read this booklet which contains
important operating instructions.
For information on product details, brochures, user manuals and
approved accessories. Please refer to
www.motorolasolutions.com.
Compliance with RF Exposure Standards
National and international regulations require manufacturers to
comply with the RF energy exposure limits for portable two-way
radios before they can be marketed. Your Motorola Solutions
two-way radio is designed, manufactured, and tested to comply
with all applicable national and international regulations for
human exposure to radio frequency electromagnetic energy.
RF Energy Exposure Awareness and Control Information
and Operational Instructions for General Population and
Uncontrolled Environment Use
For more information on what RF energy exposure is, see the
following websites:
• https://www.fcc.gov/
• http://www.who.int/peh-emf/project/en/
•http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf11467.html
•http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01904.html
For additional information, see
https://www.motorolasolutions.com/en_us/about/company-
overview/corporate-responsibility/governance-and-policies.html
Class B Digital Device
For a Class B digital device or peripheral, the instructions
furnished the user shall include the following or similar
statement, placed in a prominent location in the text of the
manual:
Note:This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
Operating Instructions
• Transmit no more than 50% of the time. To transmit (talk),
press the Push-To-Talk (PTT) button. To receive calls, release
the PTT button.
• Hold the radio in a vertical position in front of the face with the
microphone (and other parts of the radio including the
antenna) at least 1 in. (2.5 cm) away from the nose or lips.
Antenna should be kept away from the eye.
• When worn on the body, always place the radio in a Motorola
Solutions-approved clip, holder, holster, case, or body
harness for this product.
• DO NOT hold the antenna when the radio is transmitting.
• DO NOT use any portable radio that has a damaged antenna.
If a damaged antenna comes into contact with your skin, a
minor burn can result.
• To ensure continued compliance with applicable RF exposure
limits, use only Motorola Solutions-approved, supplied or
replacement antennas, batteries, and accessories.
• For a list of Motorola Solutions-approved accessories please
refer to your user manual or visit www.motorolasolutions.com
Acoustic Safety
Exposure to loud noises from any source for extended periods
of time may temporarily or permanently affect your hearing. The
louder the volume of the radio, the sooner your hearing will be
affected. Hearing damage from loud noise is sometimes
undetectable at first, and can have a cumulative effect.
To protect your hearing, follow these precautions:
• Use the lowest volume necessary to do your job.
• Turn up the volume only if you are in noisy surroundings.
• Turn down the volume before putting on a headset or
headphones.
• Limit the amount of time you use a headset or headphones at
high volume.
• When using the radio without a headset or headphones, do
not place the speaker of the radio directly against your ear.
Medical Devices
If you use a personal medical device, such as a pacemaker or
hearing aid, consult the manufacturer of your device to
determine if it is adequately shielded from RF energy. Your
physician may be able to assist you in obtaining this information.
Operational Warnings
The following explains the operational warnings:
For Vehicle With Air Bags
Potentially Explosive Atmospheres
Blasting Caps and Blasting Areas
Batteries
• Charge your battery using the approved Motorola Solutions
charger.
• Use the battery in accordance with its water and/or dust
Ingress Protection (IP) rating.
• Do not discard your battery into a fire.
• Do not replace the battery in any area labeled “Hazardous
Atmosphere”.
• Do not disassemble, crush, puncture, shred, or otherwise
attempt to change the form of your battery.
• Do not dry a wet or damp battery with an appliance or heat
source, such as a hair dryer or microwave oven.
• Do not allow conductive material such as jewelry, keys, or
beaded chains to touch exposed battery terminals.
Do Not Substitute Options or Accessories
The Motorola Solutions communications equipment certified as
intrinsically safe by the approving agency (FM, UL, CSA,
CENELEC) is tested as a complete system which consists of the
listed agency approved portable, approved battery, and
approved accessories or options, or both. This approved
portable and battery combination must be strictly observed.
There must be no substitution of items, even if the substitute
has been previously approved with a different Motorola
Solutions communications equipment unit. Approved
configurations are listed by the approving agency (FM, UL,
CSA, CENELEC).
The Intrinsically Safe Approval Label affixed to radio refers to
the intrinsically safe classification of that radio product, and the
approved batteries that can be used with that system.
The manual PN referenced on the Intrinsically Safe Approval
Label identifies the approved accessories and or options that
can be used with that portable radio unit.
Using a non-Motorola Solutions-intrinsically safe battery and/or
accessory with the Motorola Solutions-approved radio unit will
void the intrinsically safe approval of that radio unit.
European Union (EU) Waste of Electrical and
Electronic Equipment (WEEE) Directive
Supplier’s Declaration of Conformity
Notice to Users (FCC and Industry Canada)
This device complies with Part 15 of the FCC rules and Industry
Canada's license-exempt RSS's per the following conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including
interference that may cause undesired operation.
• Changes or modifications made to this device, not expressly
approved by Motorola Solutions, could void the authority of
the user to operate this equipment.
USA (FCC)/CANADA
According to FCC Part 95, FRS devices do not require a
license. Use of Motorola radio in Canada is subject to the rules
regulations in ISED RSS 210 and do not require a license.
Changes or modifications not expressly approved by Motorola
Solutions may void the user authority granted by the FCC or
ISED to operate this radio and should not be made. To comply
with FCC or ISED requirements, transmitter adjustments should
be made only by or under the supervision of a person certified
as technically qualified to perform transmitter maintenance and
repairs in the private land mobile and fixed services as certified
by an organization representative of the user of those services.
Replacement of any transmitter component (crystal,
semiconductor, etc) not authorized by the FCC or ISED
equipment authorization for this radio could violate FCC or ISED
rules.
Note:Use of this radio outside the country where it was intended
to be distributed is subject to government regulations and
may be prohibited.
Weatherproof
This radio is weatherproof to IP-54 standards. It is dust/
splashproof from any direction. The radio is resistant to water
and rain splashes only when the battery cover, headset
accessory port, and micro-USB ports are sealed. Open the
battery compartment door or headset port cover only when the
radio is dry. Use of a headset accessory should be in dry
environments only.
The micro-USB adaptor is not waterproof. Do not expose to rain
or snow. Charge the radios only in a dry location. Do not charge
wet radios. The battery door must be tightly closed with the
screw to maintain the weatherproof seal of the radio.
Installing the Batteries
Each radio can use either 1 NiMH rechargeable battery pack or
3 AA alkaline batteries and beeps when the batteries are low.
Installing the NiMH Rechargeable Battery Pack
(Optional Accessory)
1. Turn the radio off.
2. With the back of the radio facing you, loosen the retaining
screw on the battery door and open the cover.
3. Remove the NiMH battery pack from the clear plastic bag
(do not disassemble or unwrap the battery pack).
4. Insert the NiMH battery pack with the diagram facing you.
(The ribbon should be underneath the battery pack and
should wrap around the right side of the pack for easy
removal).
5. Close the battery cover and tighten the retaining screw on
the battery cover.
Installing the Three AA Alkaline Batteries
1. Turn the radio off.
2. With the back of the radio facing you, lift the battery cover
latch up and remove the cover.
3. Insert the three AA Alkaline batteries with + and – polarity as
shown inside. (The ribbon should be underneath the AA
alkaline batteries and should wrap around the right side of
the batteries).
4. Close the battery cover and tighten the retaining screw on
the battery cover.
Radio Battery Meter
The radio battery icon shows the battery charge level, from full
to empty . When the radio has one segment left,
the radio chirps periodically or after releasing the PTT button
(Low Battery Alert).
Removing Battery Door and Belt Clip
1. Use your thumb or index finger to unlatch the belt clip tab,
use thumb on another hand to push up the belt clip.
2. Use a coin to unscrew the battery door screw lock.
Removing the NiMH Battery Pack
1. Turn the radio off.
2. With the back of the radio facing you, loosen the retaining
screw on the battery door and open the cover.
3. Remove the NiMH battery pack by pulling the ribbon
attached to the radio.
4. Close the battery cover and tighten the retaining screw on
the battery door.
Removing the Three AA Alkaline Batteries
1. Turn the radio off.
2. With the back of the radio facing you, loosen the retaining
screw on the battery door and open the cover.
3. Gently remove each alkaline battery by easing each battery
out individually.
4. Close the battery cover and tighten the retaining screw on
the battery door.
Note:
• Exercise care when removing NiMH or AA batteries. Do not
use sharp or conductive tools to remove either of these
batteries.
• Remove the batteries before storing your radio for extended
periods of time. Batteries corrode over time and may cause
permanent damage to your radio.
Battery Capacity Maintenance
1. Charge the NiMH batteries once every 3 months when not in
use.
2. Before placing the radio in storage, remove the battery.
3. Store the NiMH batteries in temperature between -20 °C to
35 °C and in low humidity. Avoid damp conditions and
corrosive materials.
Using the Micro-USB Charger
The micro-USB charger is a handy port that allows you to
conveniently charge your NiMH battery pack.
1. Make sure your radio is turned OFF.
2. Plug the micro-USB cable into the micro-USB charging port
on your radio.
3. Connect the USB charger to a nearby and easily accessible
wall power outlet.
4. An empty battery will be fully charged in 14 hours.
5. The battery meter on LCD will move to indicate the battery is
charging.
Note:
• When moving between hot and cold temperatures, do not
charge the NiMH battery pack until the battery temperature
acclimates (usually about 20 minutes).
Using the Desk/Wall Stand
This stand allows for convenient placement during charging (on
desk or hung on wall). Cable management can be achieved via
cavity at bottom of stand.
1. Determine the required cable length.
2. Place rolled up cable with cable tie into stand around the two
latches following markings for correct orientation.
Note: For alternate lengths, wrap cable around approximately 3
fingers for correct loop size.
3. Assemble bottom cover on stand.
Quiet Charge
In order to ensure that your radio is always charged and on
alert, we recommend that you leave the radio plugged in and
turned on. The Quiet Charge feature allows you to disable the
reception from regular two-way calls while still receiving weather
alerts and receive and transmit emergency alerts.
To activate quiet charge:
1. Press 9 times until appears on the display. The
current setting will flash.
2. Press or to select On or Off.
3. Press the PTT button or to set.
Note: Turn Quiet Charge off when you want to have full two-way
call functionality (receive all activity on your channel).
Attaching and Removing the Belt Clip
1. Attach the belt clip to the Talkabout plate at the back of the
radio until the clip clicks in place.
2. Attach the belt clip to pocket or belt strap until the clip clicks
in place.
To Remove
1. Pull the release tab on top of the belt clip to release the latch.
2. Push the belt clip with the other hand towards the top of the
radio.
Turning your Radio On and Off
Turn clockwise to turn the radio on and counterclockwise to
turn the radio off.
1. In the ON position, the radio chirps and briefly shows all
feature icons available on the radio.
2. The display screen then shows the current channel, code
and all features that are enabled. The radio is now in
Two-Way mode.
Setting the Volume
Press and hold for three seconds while rotating until you
reach a comfortable listening level.
1. Rotate clockwise to increase the volume.
2. Rotate counterclockwise to decrease the volume.
Do not hold the radio close to your ear. If the volume is set to an
uncomfortable level, it could hurt your ear.
To communicate, all radios in your group must be set to the
same channel and Interference Eliminator Code.
1. To talk, press and hold the PTT button. When transmitting,
icon blinks and is shown. If it is a high
power transmission, is shown. If it is a low power
transmission, is shown.
2. When you are finished talking, release the PTT button.
3. When receiving, icon blinks and is shown.
If it is a high power channel, is shown. If it is a low power
channel, is shown.
For maximum clarity, hold the radio two to three inches away
from your mouth and speak directly into the microphone. Do not
cover the microphone while talking.
Note: The use of an emergency two-way radio is best when
other people in your community are using two-way radios
as well. Talk to neighbors and friends nearby and suggest
to check in on each other when disaster strikes.
Talk Range
Your radio is designed to maximize performance and improve
transmission range. Do not use the radios closer than five feet
apart.
Power Boost
To boost your radio’s power up to high power, press the top
portion of the PTT button when talking. If you know your party is
close by, you can conserve the energy of your battery by
pushing the lower part of the PTT button to use less power.
Note: If you are on an FRS only channel (see “Channels and
Frequencies”) the radio will only use low power when
either portion of the PTT button is pressed.
Power Boost is not applicable for model T400.
Monitor Button
Pressing and holding for three seconds allows you to listen
to the volume level of the radio when you are not receiving. This
allows you to adjust the volume, if necessary. You can also
press to check for activity on the current channel before you
talk.
Push-to-Talk Timeout Timer
To prevent accidental transmissions and save battery life, the
radio emits a continuous warning tone and stops transmitting if
you press the PTT button for 60 continuous seconds.
Mode Button
By pressing “mode” button, the user will be seamlessly
switching between two-way, weather mode and FM mode.
When radio is in two-way mode, will be shown.
When radio is in weather mode, will be shown.
Corresponding setting and information will be shown on the
LCD.
Selecting the Channel
Your radio has 22 channels. The channel is the frequency the
radio uses to transmit. Channels 8-14 are FRS 0.5 watt only and
all other channels are GMRS. (See the “Channels and
Frequencies” table on overleaf for details).
1. With the radio on, press 1 time until the channel number
starts to flash. When the radio is on a 0.5 watt channel,
display shows . When the radio is on a 1.5 watts
channel, display shows . The current channel flashes.
2. Press or and select an unused or quiet channel.
3. Press the PTT button to save the channel setting or to
continue set up.
Selecting the Interference Eliminator Code
Interference Eliminator Codes help minimize interference by
blocking transmissions from unknown sources. Your radio has
121 Interference Eliminator Codes. Codes 1 – 38 are standard
analog codes that appear on other FRS/GMRS radios. Codes
39 – 121 are additional digital codes added for superior
interference protection. 0 is the off position, no analog or digital
codes are enabled.
To set the code for a channel:
1. Press 2 times until the code starts to flash.
2. Press or to select the code.
Safety and General Information
Warning:
• Refer to vehicle manufacturer's manual prior to
installation of electronic equipment to avoid
interference with air bag wiring.
• DO NOT place a portable radio in the area over an
air bag or in the air bag deployment area. Air bags
inflate with great force. If a portable radio is placed in
the air bag deployment area and the air bag inflates,
the radio may be propelled with great force and cause
serious injury to occupants of the vehicle.
Warning:
• Use of a radio that is not intrinsically safe in a
potentially explosive atmosphere could result in a
serious injury, or death. You should only use a
certified Intrinsically Safe radio in potentially
explosive atmospheres.
• Explosive atmospheres refer to hazard classified
locations that may contain hazardous gas, vapors,
dusts, such as fueling areas below decks on boats,
fuel, or chemical transferor storage facilities, and
areas where the air contains chemicals or particles
such as grain, dust, or
metal powders. Areas with potentially explosive
atmospheres are often, but not always, posted.
• Turn off your radio prior to entering any area with a
potentially explosive atmosphere unless it is a radio
type specifically certified for use in hazardous
location areas.
• DO NOT remove, install, or charge batteries in such
areas, or remove or install antennas. Sparks in a
potentially explosive atmosphere can cause an
explosion or fire resulting in bodily injury or even
death.
Warning: To avoid possible interference with blasting
operations, turn off your radio when you are near
electrical blasting caps, in a blasting area, or in areas
posted: “Turn off two-way radio.” Obey all signs and
instructions.
Use only Motorola Solutions approved batteries.
Risk of explosion if the battery is replaced by an
incorrect type.
!
W A R N I N G
!
!
W A R N I N G
!
!
W A R N I N G
!
The European Union's WEEE directive requires that
products sold into EU countries must have the
crossed out trash bin label on the product (or the
package in some cases). As defined by the WEEE
directive, this cross-out trash bin label means that
customers and end-users in EU countries should not
dispose of electronic and electrical equipment or
accessories in household waste. Customers or end-
users in EU countries should contact their local
equipment supplier representative or service centre
for information about the waste collection system in
their country.
Supplier’s Declaration of Conformity
Per FCC CFR 47 Part 2 Section 2.1077(a)
Responsible Party
Name: Motorola Solutions, Inc.
Address: 2000 Progress Pkwy, Schaumburg, Il.
60196.
Phone Number: 1-800-927-2744
Hereby declares that the product:
Model Name: T482
conforms to the following regulations:
FCC Part 15, subpart B, section 15.107(a), 15.107(d),
and section 15.109(a)
FCC Licensing Information
Control Buttons
MODE
Volume/Power
Push-to-Talk (High)
Mode Switch
Call Tone
Emergency
Button
Screen
Scan/Monitor
Menu/Lock
Flashlight LED
Accessory Port
Flashlight Button
Speaker
Microphone
Micro-USB
Charging Port
Push-to-Talk (Low)
Display Screen Guide
Numbers for Channel,
Call Tone
Numbers for Codes,
FM Radio Frequency
Battery Meter
Weather Alert
LockNoise Filtering
Scan
Call Tone
iVOX / VOX
Battery Save
Roger Tone
Keypad Tone
Power (high-low)
Status (transmit/
receive)
Quiet Charge
Modes
Getting Started
Talking and Listening
Menu Options
1 2 3 4 5 6
3. Press the PTT button to save the code setting or to
continue set up.
You can set a different code for each channel using this
procedure. An extended press of or allows you to scroll
through the Interference Code rapidly so you can quickly reach
the code you want.
Note: On a radio that uses Interference Eliminator Codes, the
code must be set to 0 to communicate with radios that do
not have Interference Eliminator Codes. Select 0 for “no
tone, no code” on the display of your radio.
Setting and Transmitting Call Tones
Your radio can transmit different call tones to other radios in
your group so you can alert them that you want to talk. Your
radio has 20 call tones from which to choose.
To set a call tone:
1. Press 3 times until appears. The current call tone
setting will flash.
2. Press or to change and hear the call tone.
3. Press the PTT button to set the new call tone or to
continue set up.
To transmit your call tone to other radios set up to the same
channel and Interference Eliminator Code as your radio, press
.
Note: Setting the call to OFF disables the call tone feature.
Hands-Free Use Without Accessories ( )
You can use the feature to transmit hands-free without
the need for any headset accessories. Once is turned on,
the radio detects your voice and transmits when you speak into
the internal microphone.
1. Press 4 times until appears on the display. The
current setting will flash.
2. Press or to select On or Off or set sensitivity L1, L2
or L3.
3. Press the PTT button to set or to continue set up.
Hands-Free Use with Accessories ( )
You can transmit hands-free more reliable with the use of
optional headset accessories. Once is turned on, the
radio detects your voice and transmits when you speak.
Many accessories (sold separately) are available for your radio.
For more information, visit our website at
www.motorolasolutions.com/TalkaboutAccessories or call
1-800-448-6686.
1. Turn the radio off and plug the accessory into the
accessory port.
2. Turn the radio on. shows on the display.
3. Adjust the volume appropriately by rotating . Lower the
volume before placing the accessory on your head or in your
ear.
4. To turn off, simply remove accessory.
Note:
• There is a short delay between the time you start talking and
when the radio transmits. There is a short delay before the
transmission is completed.
• iVOX and VOX will not function when the radio is in FM mode.
Setting the Sensitivity Level When in Mode
Adjusting the radio’s sensitivity level helps minimize the
possibility of unintended noises triggering a transmission and
helps the radio pick up soft voices.
1. Press 4 times until appears. The current setting
(L1 – L3) will flash.
2. Press or to select the sensitivity level.
3. Press the PTT button to set or to continue set up.
Note: When you connect a headset, the radio is automatically
set to the last chosen sensitivity level.
Setting the Extended Battery Save Level ( )
This feature puts the radio into a low power “sleep” mode for
cycle periods of 1, 2 or 3 seconds. The radio will briefly check
for any channel activity after each sleep cycle. The sleep cycle
repeats until a key is pressed or a call is received.
1. Press 5 times until appears. The current setting (L0,
L1, L2 or L3) will flash.
2. Press or to select the battery save level.
3. Press the PTT button to set or to continue set up.
Note:
1. Signals received during the sleep period will not be heard
until after the timer period expires. The first 1 – 3 seconds of
speech can be missed. Do not use (battery save) L1, L2
or L3 settings when immediate response may be required.
2. , , and modes are not available with
extended battery save mode. Using , , or
enabling will necessarily disable the extended sleep cycle
battery settings.
3. Maximum battery life savings may be achieved only when
usage is primarily in standby mode and very little TX or RX
(talking or listening) use occurs. When RX or TX are often
used, little or no battery life extension will occur.
Noise Filtering
The noise-filtering feature helps to ensure uninterrupted
communication with other Motorola Solutions radios that have
this feature. This feature also filters out unwanted transmissions
from other radios. This is useful in places where there is heavy
radio traffic, such as amusement parks or ski resorts.
Note: noise filtering is not available when the radio is
scanning. noise filtering is not available when
extended battery save is set to L1, L2 or L3. In
consequence the will not appear in the Menu. You
must set extended battery save to L0 in order to activate
noise filtering.
To turn on or off:
1. Press 6 times until displays. The current setting On/
Off will flash.
2. Press or to select On or Off.
3. Press the PTT button to set or to continue set up.
To transmit to a radio that has noise filtering turned on:
1. Select the same channel and Interference Eliminator Code
as the other radio.
2. Press to send a call tone. This allows your voice to pass
through the noise filter on the receiving radio.
3. Press the PTT button and speak normally.
Note: Without first pressing , your message will not be
heard. After this, for a 30-second period, starting after the
last transmission, all transmissions received on the
selected channel and code will pass through the noise
filter. When radio goes to idle, will need to be pressed
again to allow communication to pass through.
Keypad Tones
You may enable or disable the speaker key tones. You will hear
the key tone each time a button is pushed.
1. Press 7 times until appears. The current setting On/
Off will flash.
2. Press either or to turn On or Off.
3. Press the PTT button to confirm or to continue set up.
Note: When the key tone feature is off, the following are not
disabled:
• Transmit timeout alert tone
• Call tone
• Low battery alert tone or
• The transmitted talk confirmation tone
Transmitting a Talk Confirmation Tone
You can set your radio to transmit a unique tone when you finish
transmitting. It is like saying “Roger” or “Over” to let others know
you are finished talking.
1. With the radio on, press 8 times until the appears.
The current setting On/Off flashes.
2. Press or to turn On or Off.
3. Press the PTT button to set or to continue set up.
Emergency Alert Mode
The Emergency Alert feature can be used to signal members in
your group of your need for urgent help. T4XX series radios will
operate in an automatic “hands-free” emergency control mode
for a total of 30 seconds after activating the Emergency Alert.
T4XX series radios in your group will automatically advance the
speaker volume to the maximum setting and sound a warbling
alert tone for 8 seconds. The alert tone is emitted from your own
radio speaker and the receiving radios in your group. After the 8
second alert, any spoken words or incidental sounds at your end
will be transmitted to the group for 22 seconds. For the 30
second duration of Emergency Alert mode, T4XX series radio
controls and buttons will be locked to maximize reception of the
emergency message.
1. Press and hold the Emergency Alert button for 3 seconds.
2. Release the button the alert tone begins to sound. There is
no need to continue to hold the Emergency Alert button or
use PTT for your message to be transmitted.
3. After the alert tone ends you may speak into the
microphone. Your voice or incidental sounds will be
transmitted.
4. After 30 seconds your radio speaker will emit a Talk
Confirmation Tone. Operation then returns to normal
two-way mode.
Note: All Motorola Talkabout EM, MJ, MR, MT, MU and T4XX
series radios (except for model T400) are fully compatible
with the Emergency Alert feature. Radios other than EM,
MJ and MR series can receive the emergency alert
signal, but will not respond with adjusted volume settings,
locked controls or a warbling alert tone. Users of other
radio models set to the same channel and Interference
Eliminator Code will hear a steady tone for 8 seconds
followed by the voice transmission for 22 seconds.
Built-in LED Flashlight with Power Outage Function
Press the flashlight button to turn and keep the light on. The
LED flashlight has a power outage function where the light is
turned on automatically when power is cut. When the flashlight
is turned on, press the flashlight button to turn it off.
Note: If the flashlight is turned on automatically due to a power
cut, the flashlight will turn off automatically after 30
minutes to conserve battery power.
Keypad Lock
To avoid accidentally changing your radio settings:
1. Press and hold until displays.
2. When in lock mode, you can turn the radio on and off, adjust
the volume, receive, transmit, send a call tone and monitor
channels. All other functions are locked.
3. To unlock the radio, press and hold until is no longer
displayed.
Scanning Channels
Use scan to search the 22 channels for transmissions from
unknown parties, to find someone in your group who has
accidentally changed channels or to quickly find unused
channels for your own use.
There is a priority feature and 2 modes of scanning (basic and
advanced) to make your search more effective. The basic scan
mode uses the channel and code combinations for each of the
22 channels as you have set them (or with the default code
value of 1). The “Advanced Scan” mode will scan all channels
for any and all codes, detect any code in use and use that code
value temporarily for that channel.
Priority is given to the “home channel”, that is, the channel (and
Interference Eliminator Code) your radio is set to when you start
the scan. This means the initial channel (and code settings) is
scanned more often than the other 21 channels and your radio
will respond quickly to any activity occurring on the home
channel as a priority.
To start Scanning:
1. Briefly press the key. The scan will appear in the
display and the radio will begin to scroll through the channel
and code combinations.
2. When the radio detects channel activity matching the
channel and code combination, it stops scrolling and you can
hear the transmission.
3. To respond and talk to the person transmitting, press the
PTT button within five seconds after the end of the
transmission.
4. The radio will resume scrolling through the channels five
seconds after the end of any received activity.
5. To stop scanning, briefly press the key.
To start Advanced Scanning
1. Set the Interference Eliminator Code to “zero” or OFF.
2. Briefly press the key. The scan will appear in the
display and the radio will begin to scroll through the
channels. No Interference Eliminator Codes will filter what is
heard.
3. When the radio detects channel activity with ANY code (or
NO code), it stops scrolling and you can hear the
transmission. Any Interference Eliminator Code that may be
in use by that party will be detected and displayed.
4. To respond and talk to the person transmitting, press the
PTT button within five seconds of the end of the
transmission. The radio will transmit using the newly
detected Interference Eliminator Code.
5. The radio will resume scrolling through the channels five
seconds after the end of any received activity.
6. To stop scanning, briefly press the .
Scanning Notes:
1. If you press the button while the radio is scrolling PTT
through inactive channels, the transmission will be on the
“home channel”. Scanning will resume five seconds after the
end of your transmission. You may press the key to stop
scanning at any time.
2. If the radio stops on an undesired transmission, you may
immediately resume the scan by briefly pressing or .
3. If the radio repeatedly stops on an undesired transmission,
you may temporarily remove that channel from the scan list
by pressing and holding or for three seconds. You
may remove more than one channel in this way.
4. To restore the removed channel(s) to the scan list, turn the
radio off and then turn back on, or exit and re-enter the
scanning mode by pressing .
5. You cannot remove the home channel from the scan list.
6. In Advanced Scan, the detected code will only be used for
one transmission. You must note that code, exit scan and set
that detected code on that channel to permanently use the
detected code.
FM Receiver
Your radio can tune to receive FM frequencies ranges from 87.5
MHz to 108 MHz.
Entering FM Mode:
1. From Weather mode, press to enter FM mode. The
will be shown.
2. The last set frequency will be displayed.
Note: If you experience noise while listening to FM during
charging, please move the radio around for a clearer
reception. Call 1-800-448-6686 if difficulty continues.
Setting the FM Frequency:
In FM mode press or to change the frequency in 0.1
MHz increment. Long press will go to the next available FM
channel.
Note: While radio is in FM mode, it allows you to and
using previous set two-way channel, as well as receiving
weather alert (if it is turned on).
Transmitting a PTT call in FM Mode:
1. In FM mode, pressing the PTT button will switch radio to
two-way mode. Two-way mode screen is shown and the
blinks.
2. Release the PTT button will return to FM mode screen and
continue listen to FM channel.
Receiving Call in FM Mode:
1. In FM mode, any incoming call will switch radio to two-way
mode. Two-way mode screen is shown and the
blinks.
2. When the call ended, radio will switch back to FM mode. FM
mode screen is shown.
Receiving Weather Alert in FM Mode:
1. When receiving a Weather Alert Call, radio will switch to
Weather Mode. Weather mode screen is shown and the
blinks until the mode is exited by you.
2. You may stay in weather mode or press to exit and
return to FM mode.
Note: When the weather channel is activated after receiving an
alert, and no buttons are pressed for 5 minutes, the
weather mode will automatically revert back to FM mode.
Safety Whistle Belt Clip
To blow safety whistle:
1. Take Belt Clip of Radio.
2. Ensure that mouth covers both holes on edge of whistle Belt
Clip entirely.
Your radio can tune in to broadcasts by the United States
National Oceanic and Atmospheric Administration (NOAA)
Weather Radio and Environment and Climate Change Canada
(ECCC) Weather Radio.You can listen to a weather channel
(see “Weather Channels and Frequencies” table for details) or
set your radio to alert you to emergency weather broadcasts
that interrupt routine broadcasts. When you listen to a weather
channel, you cannot use your radio in scan mode or for two-way
communications. Both NOAA and ECCC have transmitters
located throughout the United States and Canada, respectively.
These transmitters broadcast watches, forecasts and other
information 24 hours a day.
Note: NOAA weather radio stations are assigned to cover
specific areas and service may be limited. Please check
with your local weather office for frequency and details or
visit www.weather.gov/nwr in the US to view the
appropriate transmitter for your area. The use of the
NOAA logo does not provide an endorsement or implied
endorsement by the National Weather Service of NOAA,
nor does the use of the Weatheradio logo provide an
endorsement or implied endorsement by Environment
and Climate Change Canada (ECCC).
Entering Weather Mode
1. From two-way mode, press to enter weather mode
.
Setting the Weather Channel
Your radio receives weather frequencies:
1. In weather mode, press 1 time until weather channel
number flashes.
2. Press or to select the appropriate channel with good
reception in your area.
3. Press the PTT button to set or to continue set up
weather alert.
Setting the Weather Alert
Your radio can be set to respond to NOAA Weather Radio
emergency messages. A special alarm tone sounds an alert and
turns on the weather receiver to give you immediate weather
and emergency information.
1. In weather mode, press 2 times until displays.
2. Press or to select On/Off.
3. Press the PTT button or to exit the weather menu set up.
4. Press to return to two-way mode. If you activate
Weather Alert and return to two-way mode will display.
Note: When the weather channel is activated, either manually
or after receiving an alert, and no buttons are pressed for
5 minutes, the weather mode will automatically revert
back to two-way mode.
In the United States, weather alert test is conducted by the
National Weather Service on a weekly basis. This test is run
every Wednesday somewhere between 10 a.m. and 1 p.m. If
you are planning to use the radio at a fixed location in your
house, we recommend to test at that location.
1. Find a location in your house where the weather channel is
clear.
2. Turn on the Weather Alert feature during the weekly test
period. Leave the radio on in two-way mode during the test
period. Ensure your radio is charged.
If the radio successfully received the weekly test, you will hear
the weather alert test message automatically turn on. If you did
not receive the alert, move your radio to a different location in
the house where the weather channel reception is better. For
example, move your radio closer to a window. Repeat Step 2 if
needed.
Weather Channels and Frequencies
Remarks: Power refers to maximum allowable power as defined
by FCC/ISED for each channel under FRS rules for USA and
FRS/GMRS for Canada and is not a reflection of the power
specification of the radio.
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the
Stylized M logo are trademarks or registered trademarks of
Motorola Trademark Holdings, LLC and are used under license.
All other trademarks are the property of their respective owners.
© 2015 and 2019 Motorola Solutions, Inc. All rights reserved.
Consumer Two-Way Radio Products and
Accessories purchased in the United States or
Canada
What Does this Warranty Cover?
Subject to the exclusions contained below, Motorola Solutions,
Inc. (“Motorola”) warrants the Motorola branded consumer
two-way radios that operate via Family Radio Service or
General Mobile Radio Service (“Products”), the Motorola
branded or certified accessories sold for use with these
Products (“Accessories”) to be free from defects in materials
and workmanship under normal consumer usage for the
period(s) outlined below. This limited warranty is the exclusive
remedy of a consumer, and applies as follows to new Products
and Accessories and purchased by consumers in the United
States or Canada, which are accompanied by this written
warranty:
Who is Covered?
This warranty extends only to the first consumer purchaser, and
is not transferable.
What will MOTOROLA SOLUTIONS, INC. do?
Motorola Solutions, Inc., at its option, will at no charge repair,
replace or refund the purchase price of any Products or
Accessories that do not conform to this warranty. We may use
functionally equivalent reconditioned/ refurbished/ pre-owned or
new Products or Accessories.
What Other Limitations Are There?
Any Implied Warranties, Including Without Limitation
The implied warranties of merchantability and fitness for a
particular purpose, shall be limited to the duration of this limited
warranty, otherwise the repair, replacement, or refund as
provided under this express limited warranty is the exclusive
remedy of the consumers, and is provided in lieu of all other
warranties, express or implied. In no event shall Motorola
Solutions be liable, whether in contract or tort (including
negligence) for damages in excess of the purchase price of the
product or accessory, or for any indirect, incidental, special or
consequential damages of any kind, or loss of revenue or
profits, loss of business, loss of information or other financial
loss arising out of or in connection with the ability or inability to
use the products or accessories to the full extent these
damages may be disclaimed by law.
Some states and jurisdictions do not allow the limitation or
exclusion of incidental or consequential damages, or limitation
on the length of an implied warranty, so the above limitations or
exclusions may not apply to you. This warranty gives you
specific legal rights, and you may also have other rights that
vary from state to state or from one jurisdiction to another.
How to Obtain Warranty Service or Other
Information?
To obtain service or information, please call:
USA and Canada Two-Way Radios
1-800-448-6686.
www.motorolasolutions.com/talkabout
For Accessories:
Please call the telephone number designated above for the
Product with which they are used.
You will receive instructions on how to ship the Products or
Accessories at your expense, to Motorola Solutions or a
Motorola Solutions Authorized Repair Center. To obtain service,
you must include: (a) a copy of your receipt, bill of sale or other
comparable proof of purchase; (b) a written description of the
problem; (c) the name of your service provider, if applicable; (d)
the name and location of the installation facility (if applicable)
and, most importantly; (e) your address and telephone number.
For more information, please visit us at:
L3 = High Sensitivity for quiet environments
L2 = Medium Sensitivity for most environments
L1 = Low Sensitivity for noisy environments
L0 = Normal battery save mode
L1 = 1 second extended battery save mode (low setting)
L2 = 2 seconds extended battery save mode (mid setting)
L3 = 3 seconds extended battery save mode (max setting)
Special Features
WARNING: The Emergency Alert feature should only be
used in the event of an actual emergency.
Motorola Solutions is not responsible if there is
no response to the emergency alert from the
receiving group.
MODE
MODE
Weather Receiver
MODE
MODE
Weather Channel Frequency Weather Channel Frequency
WX1 162.550 MHz WX7 162.525 MHz
WX2 162.400 MHz WX8 161.650 MHz
WX3 162.475 MHz WX9 161.775 MHz
WX4 162.425 MHz WX10 161.750 MHz
WX5 162.450 MHz WX11 162.000 MHz
WX6 162.500 MHz
Channel Frequency Max Power
Output Channel Frequency Max Power
Output
1 462.5625 MHz 2 W 12 467.6625 MHz 0.5 W
2 462.5875 MHz 2 W 13 467.6875 MHz 0.5 W
3 462.6125 MHz 2 W 14 467.7125 MHz 0.5 W
4 462.6375 MHz 2 W 15 462.5500 MHz 2 W
5 462.6625 MHz 2 W 16 462.5750 MHz 2 W
6 462.6875 MHz 2 W 17 462.6000 MHz 2 W
7 462.7125 MHz 2 W 18 462.6250 MHz 2 W
8 467.5625 MHz 0.5 W 19 462.6500 MHz 2 W
9 467.5875 MHz 0.5 W 20 462.6750 MHz 2 W
10 467.6125 MHz 0.5 W 21 462.7000 MHz 2 W
11 467.6375 MHz 0.5 W 22 462.7250 MHz 2 W
Channels and Frequencies
Patent and Copyright Information
Warranty
Products Covered Length Of Coverage
Products and Accessories
as defined above, unless
otherwise provided for below.
Two (2) years from the date of purchase
by the first consumer purchaser of the
product unless otherwise provided for
below.
Batteries whose fully charged
capacity falls below 80 % of their
rated capacity and batteries that
leak.
Ninety (90) days from the date of
purchase by the first consumer purchaser
of the product unless otherwise provided
for below
Products and Accessories
that are repaired or replaced.
The balance of the original warranty or
for ninety (90) days from the date
returned to the consumer, whichever is
longer.
Exclusions From Warranty Coverage
Normal Wear and Tear:
Periodic maintenance, repair and replacement of Products or
Accessories due to normal wear and tear.
Abuse & Misuse:
Defects or damage that result from: (a) improper operation,
storage, misuse or abuse, accident or neglect, such as
physical damage (cracks, scratches, etc.) to the surface of the
Products and Accessories resulting from misuse; (b) contact
with liquid, water, rain, extreme humidity or heavy perspiration,
sand, dirt or the like, extreme heat, or food; (c) use of the
Products or Accessories for commercial purposes or
subjecting the Product or Accessory to abnormal usage or
conditions; or (d) other acts which are not the fault of Motorola
Solutions.
Use of Non-Motorola Solutions branded Products and
Accessories:
Defects or damage that result from the use of Non-Motorola
Solutions branded or certified products, accessories, software
or other peripheral equipment.
Unauthorized Service or Modification:
Defects or damages resulting from service, testing,
adjustment, installation, maintenance, alteration, or
modification in any way by someone other than Motorola
Solutions or its authorized service centers.
Altered Products:
Products or Accessories with (a) serial numbers or date tags
that have been removed, altered or obliterated; (b) broken
seals or that show evidence of tampering; (c) mismatched
board serial numbers; or (d) nonconforming or non-Motorola
branded housings, or parts.
Communication Services:
Defects, damages, or the failure of Products or Accessories
due to any communication service or signal you may subscribe
to or use with the Products or Accessories.
121110987


Produktspezifikationen

Marke: Motorola
Kategorie: Radio
Modell: Talkabout T482

Brauchst du Hilfe?

Wenn Sie Hilfe mit Motorola Talkabout T482 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Radio Motorola

Bedienungsanleitung Radio

Neueste Bedienungsanleitung fĂĽr -Kategorien-