Motorola RDU4100 Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Motorola RDU4100 (180 Seiten) in der Kategorie Radio. Dieser Bedienungsanleitung war für 19 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/180
RDX™ Series
Two-way Radios
User Guide
RDU4100, RDU4103 & RDV5100 Non-Display Model
en-US fr-CA
00
N
-D
is
pl
M
od
e
Open Source Software Legal Notices:
This Motorola Solutions product contains Open Source Software. For information
regarding licenses, acknowledgements, required copyright notices and other usage
terms, refer to the documentation for this Motorola Solutions product at:
http://businessonline.motorolasolutions.com
Go to: Resource Center > Product Information > Manual > Accessories.
Informations juridiques relatives aux logiciels libres :
Ce produit Motorola Solutions contient des logiciels libres. Pour obtenir des rensei-
gnements relatifs aux licences, aux attestations, aux avis de droits d'auteur requis et
à d'autres conditions d'utilisation, reportez-vous à la documentation concernant ce
produit Motorola Solutions à l'adresse suivante :
http://businessonline.motorolasolutions.com
Allez à l’adresse Resource Center > Product Information > Manual > Accessories.
English
1
CONTENTS
CONTENTS
Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Product Safety . . . . . . . . . . . . . . . . . . . . . . . .5
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . .7
Package Contents . . . . . . . . . . . . . . . . . . . . . .7
FCC Licensing Information . . . . . . . . . . . . .8
Interference Information . . . . . . . . . . . . . . . . .8
Canada Licensing Information. . . . . . . . . .10
General Information. . . . . . . . . . . . . . . . . . . .10
The License Application . . . . . . . . . . . . . . . .10
Batteries and Chargers Safety Information .
11
Operational Safety Guidelines. . . . . . . . . . . .12
Radio Overview . . . . . . . . . . . . . . . . . . . . . .13
Parts Of The Radio . . . . . . . . . . . . . . . . . . . .13
On/Off/Volume Knob. . . . . . . . . . . . . . . .14
Channel Selector Knob . . . . . . . . . . . . . .14
Accessory Connector . . . . . . . . . . . . . . .14
Model Label . . . . . . . . . . . . . . . . . . . . . .14
Microphone . . . . . . . . . . . . . . . . . . . . . . .14
Antenna. . . . . . . . . . . . . . . . . . . . . . . . . .14
LED Indicator . . . . . . . . . . . . . . . . . . . . .14
Side Buttons. . . . . . . . . . . . . . . . . . . . . . . . . 14
The Lithium-Ion (Li-Ion) Battery . . . . . . . 15
RDX Non Display Models. . . . . . . . . . . . . . . 15
Battery Features. . . . . . . . . . . . . . . . . . . . . . 16
About the Li-Ion Battery . . . . . . . . . . . . . 16
Battery Recycling and Disposal . . . . . . . 17
Installing the Lithium-Ion (Li-Ion) Battery 18
Removing the Lithium-Ion (Li-Ion) Battery .
18
Attaching the Antenna . . . . . . . . . . . . . . 19
Removing the Antenna . . . . . . . . . . . . . 19
Installing Spring Action Belt clip. . . . . . . 20
Power Supply, Adaptor and Drop-in Tray
Charger . . . . . . . . . . . . . . . . . . . . . . . 20
Battery Life Information . . . . . . . . . . . . . 21
Charging the Battery . . . . . . . . . . . . . . . 22
Drop-in Tray Charger LED Indicators . . 24
Estimated Charging Time . . . . . . . . . . . 26
Multi-Unit Charger LED Indicators . . . . . 28
Getting Started . . . . . . . . . . . . . . . . . . . . . . 29
Turning radio ON/OFF . . . . . . . . . . . . . . . . . 29
Adjusting Volume . . . . . . . . . . . . . . . . . . . . . 29
Selecting a Channel . . . . . . . . . . . . . . . . . . . 29
English
2
CONTENTS
Talking and Monitoring . . . . . . . . . . . . . . . . .29
Receiving a Call . . . . . . . . . . . . . . . . . . . . . .30
Talk Range . . . . . . . . . . . . . . . . . . . . . . . . . .30
Radio LED Indicators . . . . . . . . . . . . . . . . . .32
Hands-Free Use/VOX . . . . . . . . . . . . . . . . . .33
With Compatible VOX Accessories. . . . .33
Hands Free without Accessories (iVOX).34
Setting VOX/IVOX Sensitivity . . . . . . . . . . . .34
Toggle Voice Prompt in User Mode . . . . . . .34
Power Up - Tone Mode . . . . . . . . . . . . . . . . .34
Reset to Factory Defaults . . . . . . . . . . . . . . .34
Microphone Gain . . . . . . . . . . . . . . . . . . . . . .34
Programming Features . . . . . . . . . . . . . . . .36
Advanced Configuration Mode . . . . . . . . . . .36
Entering Advanced Configuration Mode .36
Entering Frequencies Values . . . . . . . . . . . .37
Reading CTCSS/DPL Values . . . . . . . . . . . .37
Reading Auto-Scan Values . . . . . . . . . . . . . .37
Active Channels . . . . . . . . . . . . . . . . . . . . . .38
Weather Channel Programming (Not for
RDU4103). . . . . . . . . . . . . . . . . . . . . . . . . .38
Saving Settings . . . . . . . . . . . . . . . . . . . . . . .38
Programming Mode FAQ . . . . . . . . . . . . . . .38
Programming Values Examples . . . . . . . . . . 39
Example of Programming a Frequency . 39
Example of Programming a Code . . . . . 40
Example of Programming Auto-Scan . . 40
Example of Programming Active Channels
41
Example of Programming Weather Chan-
nels (Not valid for RMU4103). . . . . . . 41
Other Programming Features . . . . . . . . . . . 42
Scan. . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Editing Scan List . . . . . . . . . . . . . . . . . . 42
Nuisance Channel Delete . . . . . . . . . . . 42
Customer Programming Software (CPS) . . . 43
Time-Out Timer . . . . . . . . . . . . . . . . . . . 44
Power Select . . . . . . . . . . . . . . . . . . . . . 44
Call Tones . . . . . . . . . . . . . . . . . . . . . . . 44
Scramble . . . . . . . . . . . . . . . . . . . . . . . . 44
Reverse Burst . . . . . . . . . . . . . . . . . . . . 44
Text-to-Speech (Changing Pre-Defined Voice
Aliases) . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Enable User Pre-Defined Voice Prompt
(VP) Checkbox. . . . . . . . . . . . . . . . . . 44
User Pre-Defined Voice Prompt (VP) Text
English
3
CONTENTS
45
Import Voice File . . . . . . . . . . . . . . . . . . .45
Listen to User Customized Voice Prompt
(VP) Text . . . . . . . . . . . . . . . . . . . . . . .45
Weather Feature (Not for RDU4103) . . . . . .45
Weather Alert Mode . . . . . . . . . . . . . . . .46
Weather Channel Frequencies Table . . .46
The Weather Alert has two modes of opera-
tions: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
EOM Enabled . . . . . . . . . . . . . . . . . . . . .47
New Alert Tone Timer . . . . . . . . . . . . . . .47
Event Type Filter . . . . . . . . . . . . . . . . . . . . . .48
All Events . . . . . . . . . . . . . . . . . . . . . . . .48
Alert Test Event . . . . . . . . . . . . . . . . . . .48
Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Watch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Emergency . . . . . . . . . . . . . . . . . . . . . . . . . .49
Statement . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Event Code Filter. . . . . . . . . . . . . . . . . . . . . .49
Block Event . . . . . . . . . . . . . . . . . . . . . . . . . .49
Event Code . . . . . . . . . . . . . . . . . . . . . . . . . .49
The Critical Events Table . . . . . . . . . . . . . . . 50
Geographic Filter . . . . . . . . . . . . . . . . . . . . 51
State. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
County . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
FIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Cloning Radios. . . . . . . . . . . . . . . . . . . . . . . 52
Cloning with a Multi Unit Charger (MUC)53
Cloning Radio using the Radio to Radio
(R2R) Cloning Cable (Optional Accesso-
ry). . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Cloning using the Customer Programming
Software (CPS) . . . . . . . . . . . . . . . . . 56
Troubleshooting . . . . . . . . . . . . . . . . . . . . . 58
Use and Care . . . . . . . . . . . . . . . . . . . . . . . 62
Frequency and Code Charts . . . . . . . . . . . 64
RDX UHF Frequencies Chart. . . . . . . . . . . . 66
RDU4100 – UHF Default Frequencies Chart 69
RDU4103 – UHF Default Frequencies Chart 70
CTCSS and PL/DPL Codes . . . . . . . . . . . . . 71
Motorola Solutions Limited Warranty for the
United States and Canada. . . . . . . . . . . . . 76
English
4
CONTENTS
Accessories . . . . . . . . . . . . . . . . . . . . . . . . .79
Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79
Audio Accessories. . . . . . . . . . . . . . . . . . . . .79
Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79
Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79
Chargers . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
Carry Accessories . . . . . . . . . . . . . . . . . . . . .80
Software Applications . . . . . . . . . . . . . . . . . .80
Power supplies ac pin adapters . . . . . . . . . .80
Power supplies . . . . . . . . . . . . . . . . . . . . . . .80
English
5
PRODUCT SAFETY
PRODUCT SAFETY
PRODUCT SAFETY AND RF
EXPOSURE COMPLIANCE
ATTENTION!
This radio is restricted to occupational use only
to satisfy FCC RF energy exposure
requirements.
For a list of Motorola Solutions-approved
antennas, batteries and other accessories, visit
the following website which lists approved
accessories:
www.motorolasolutions.com/RDX
Before using this product,
read the operating
instructions and RF energy
awareness information
contained in the Product
Safety and RF Exposure
booklet enclosed with your
radio.
!
C a u t i o n
English
6
PRODUCT SAFETY
NOTES
English
7
INTRODUCTION
INTRODUCTION
Thank you for purchasing the Motorola Solutions®
RDX Series™ Radio. This radio is a product of
Motorola Solutions' 80 plus years of experience as a
world leader in the designing and manufacturing of
communications equipment. The RDX Series radios
provide cost-effective communications for businesses
such as retail stores, restaurants, schools,
construction sites, manufacturing, property and hotel
management and more. Motorola Solutions
professional two-way radios are the perfect
communications solution for all of today's fast-paced
industries.
Note: Read this user guide carefully to ensure you
know how to properly operate the radio
before use
PACKAGE CONTENTS
• Radio
• Belt Clip
• Lithium-Ion Battery
• Power Supply
• Quick Reference Guide
• Drop-in Tray Charger
• Product Safety & RF Exposure Booklet
• Antenna
For a copy of a large-print version of this user
guide or for product-related questions, contact
1-800-448-6686 in the USA
1-800-461-4575 in Canada
1-888-390-6456 on TTY (Text Telephone)
For product related information, visit us at:
www.motorolasolutions.com/RDX
Or
Business Radios
RPSD 1C15, Motorola
8000 West Sunrise Boulevard
Plantation, Florida 3332
English
8
FCC LICENSING
INFORMATION
FCC LICENSING
INFORMATION
INTERFERENCE INFORMATION
This device complies with Part 15 of the FCC
Rules. Operation is subject to the condition that
this device does not cause harmful
interference.
RDX Series Business two-way radios operate
on radio frequencies that are regulated by the
Federal Communications Commission (FCC).
To transmit on these frequencies, you are
required to have a license issued by the FCC.
Application is made available on FCC Form
601 and Schedules D, H, and Remittance Form
159.
To obtain these FCC forms, request document
000601 which includes all forms and
instructions. If you wish to have the document
faxed, mailed or have questions, use the
following contact information.
Faxed contact the
Fax-On- Demand
system at:
Mailed call the FCC forms hotline at: Questions regarding FCC
license contact the FCC at:
1-202-418-0177 1-800-418-FORM
1-800-418-3676
1-888-CALL-FCC
1-888-225-5322
Or: http://www.fcc.gov
FCC LICENSING
INFORMATION
English
9
Before filling out your application, you must
decide which frequency(ies) you can operate
on. See “Frequencies and Code Charts”. For
questions on determining the radio frequency,
call Motorola Solutions Product Services at:
1-800-448-6686
Changes or modifications not expressly
approved by Motorola Solutions may void the
user’s authority granted by the FCC to operate
this radio and should not be made. To comply
with FCC requirements, transmitter
adjustments should be made only by or under
the supervision of a person certified as
technically qualified to perform transmitter
maintenance and repairs in the private land
mobile and fixed services as certified by an
organization representative of the user of those
services.
Replacement of any transmitter component
(crystal, semiconductor and more.) not
authorized by the FCC equipment authorization
for this radio could violate FCC rules.
Use of this radio outside the country where it
was intended to be distributed is subject to
government regulations and may be prohibited.
English
10
CANADA LICENSING
INFORMATION
CANADA LICENSING
INFORMATION
GENERAL INFORMATION
The operation of your Motorola Solutions radio is
subject to the Radiocommunications Act and must
comply with rules and regulations of the Federal
Government’s department of Industry Canada.
Industry Canada requires that all operators using
Private Land Mobile frequencies obtain a radio license
before operating their equipment.
An application for your Industry Canada license is
made on the form included with your radio. Additional
forms and latest license application versions can be
obtained from the nearest Industry Canada District
office. A list of these offices is included for your
information.
This device complies with Industry Canada’s licence-
exempt RSSs. Operation is subject to the following
two conditions:
1. This device may not cause interference; and
2. This device must accept any interference,
including interference that may cause undesired
operation of the device.
THE LICENSE APPLICATION
General Instructions
1. Fill in the items as per the instructions. If you
need additional space for any item use the
reverse side of the application.
2. Be sure to use a typewriter or print legibly.
3. Make a copy for your files.
4. Prepare a cheque or money order made out to
the “Receiver General for Canada”, for an
amount, which is on the following schedule, for
each radio purchased. (License is valid until
April 1st of each year, and the renewed.
5. Mail your completed application, along with your
cheque or money order to the closest Industry
Canada District office, according to the list on
pages.
To obtain the latest Canadian License Application
form, please go to:
www.ic.gc.ca
English
11
BATTERIES AND CHARGERS
SAFETY INFORMATION
BATTERIES AND
CHARGERS SAFETY
INFORMATION
This document contains important safety and
operating instructions. Read these instructions
carefully and save them for future reference.
Before using the battery charger, read all the
instructions and cautionary markings on
• the charger,
• the battery, and
• the radio using the battery
1. To reduce risk of injury, charge only the
rechargeable Motorola Solutions-authorized
batteries. Other batteries may explode, causing
personal injury and damage.
2. Use of accessories not recommended by
Motorola Solutions may result in risk of fire,
electric shock, or injury.
3. To reduce risk of damage to the electric plug
and cord, pull by the plug rather than the cord
when disconnecting the charger.
4. An extension cord should not be used unless
absolutely necessary. Use of an improper
extension cord could result in risk of fire and
electric shock. If an extension cord must be
used, make sure that the cord size is 18AWG
for lengths up to 100 ft (30.48 m), and 16AWG
for lengths up to 150 ft (45.72 m).
5. To reduce risk of fire, electric shock, or injury, do
not operate the charger if it has been broken or
damaged in any way. Take it to a qualified
Motorola Solutions service representative.
6. Do not disassemble the charger; it is not
repairable and replacement parts are not
available. Disassembly of the charger may
result in risk of electrical shock or fire.
7. To reduce risk of electric shock, unplug the
charger from the AC outlet before attempting
any maintenance or cleaning
English
12
BATTERIES AND CHARGERS
SAFETY INFORMATION
OPERATIONAL SAFETY
GUIDELINES
• Turn the radio OFF when charging battery.
• The charger is not suitable for outdoor use. Use
only in dry locations/conditions.
• Connect charger only to an appropriately fused
and wired supply of the correct voltage (as
specified on the product).
• Disconnect charger from line voltage by removing
main plug.
• The outlet to which this equipment is connected
should be nearby and easily accessible.
• In equipment using fuses, replacements must
comply with the type and rating specified in the
equipment instructions.
• Maximum ambient temperature around the power
supply equipment must not exceed 40 °C (104
°F).
• Power output from the power supply unit must not
exceed the ratings stated on the product label
located at the bottom of the charger.
• Make sure that the cord is located where it will
not be stepped on, tripped over, or subjected to
water, damage, or stress.
English
13
RADIO OVERVIEW
RADIO OVERVIEW
PARTS OF THE RADIO
Antenna On/Off/Volume
Knob
LED
Indicator
Channel Selector
Knob
Audio
Accessory
2-Pin
Connector
Battery
Microphone
PTT (Push-To-
Talk) Button
SB1
SB2
English
14
RADIO OVERVIEW
On/Off/Volume Knob
Used to turn the radio ON or OFF and to adjust
the radio’s volume.
Channel Selector Knob
Used to switch the radio to different channels.
Accessory Connector
Used to connect compatible audio accessories.
Model Label
Indicates the model of the radio.
Microphone
Speak clearly into the microphone when
sending a message.
Antenna
For models RDU4100 and RDU4103 there are
2 removable antennas. For RDV5100 there is
one VHF removable antenna.
LED Indicator
Used to give battery status, power-up status,
radio call information and scan status.
SIDE BUTTONS
Push-to-Talk (PTT) Button
• Press and hold down this button to talk, release it
to listen.
Side Button 1 (SB1)
• The Side Button 1 is a general button that can be
configured by the Customer Programming
Software - CPS. The default setting of SB1 is
‘Monitor’.
Side Button 2 (SB2)
• The Side Button 2 is a general button that can be
configured by the CPS. The SB2 default setting is
‘Scan/Nuisance Channel Delete’.
English
15
RADIO OVERVIEW
The Lithium-Ion (Li-Ion) Battery
RDX Series comes with a Standard Capacity Li-Ion battery. Other batteries may be available. For
more information, see “Battery Features” on page 16.
RDX NON DISPLAY MODELS
This User Guide covers multiple RDX Series models, and may detail some features your radio does
not have. The radio’s model is shown on the bottom of the radio and provides the following
information:
Table 1: RDX Series Radio Specifications
Model Frequency
Band
Transmit
Power (W)
Number of
Channels Antenna
RDU4100 UHF 4 10 Removable
RDU4103 UHF 4 10 Removable
RDU5100 VHF 5 10 Removable
English
16
RADIO OVERVIEW
BATTERY FEATURES
RDX Series radios provide Lithium-Ion
batteries that come in different capacities that
defines the battery life.
About the Li-Ion Battery
The RDX Series radio comes equipped with a
rechargeable Li-Ion battery. This battery should
be fully charged before initial use to ensure
optimum capacity and performance.
Battery life is determined by several factors.
Among the more critical are the regular
overcharge of batteries and the average depth
of discharge with each cycle. Typically, the
greater the overcharge and the deeper the
average discharge, the fewer cycles a battery
will last. For example, a battery which is
overcharged and discharged 100% several
times a day, lasts fewer cycles than a battery
that receives less of an overcharge and is
discharged to 50% per day. Further, a battery
which receives minimal overcharging and
averages only 25% discharge, lasts even
longer.
Motorola Solutions batteries are designed
specifically to be used with a Motorola
Solutions charger and vice versa. Charging in
non-Motorola Solutions equipment may lead to
battery damage and void the battery warranty.
The battery should be at about 77 °F (25 °C)
(room temperature), whenever possible.
Charging a cold battery (below 50 °F [10 °C])
may result in leakage of electrolyte and
ultimately in failure of the battery. Charging a
hot battery (above 95 °F [35 °C]) results in
reduced discharge capacity, affecting the
performance of the radio. Motorola Solutions
rapid-rate battery chargers contain a
temperature-sensing circuit to ensure that
batteries are charged within the temperature
limits stated above.
English
17
RADIO OVERVIEW
Battery Recycling and Disposal
Li-Ion rechargeable batteries can be recycled.
However, recycling facilities may not be
available in all areas. Under various U.S. state
laws and the laws of several other countries,
batteries must be recycled and cannot be
disposed of in landfills or incinerators. Contact
your local waste management agency for
specific requirements and information in your
area. Motorola Solutions fully endorses and
encourages the recycling of Li-Ion batteries. In
the U.S. and Canada, Motorola Solutions
participates in the nationwide Rechargeable
Battery Recycling Corporation (RBRC)
program for Li-Ion battery collection and
recycling.
Many retailers and dealers participate in this
program. For the location of the drop-off facility
closest to you, access RBRC's Internet web
site at:
http://www.call2recycle.org
or call:
(877)723-1297
This internet site and telephone number also
provides other useful information concerning
recycling options for consumers, businesses,
and governmental agencies.
English
18
RADIO OVERVIEW
Installing the Lithium-Ion (Li-Ion) Battery
1. Turn OFF the radio.
2. With the Motorola Solutions logo side up on the
battery pack, fit the tabs at the bottom of the
battery into the slots at the bottom of the radio’s
body.
3. Press the top part of the battery towards the
radio until a click is heard.
Note: To learn about the Li-Ion Battery Life
features, refer to “About the Li-Ion Battery”
on page 16
Removing the Lithium-Ion (Li-Ion) Battery
1. Turn OFF the radio.
2. Push down the battery latch and hold it while
removing the battery.
3. Pull the battery away from the radio.
Battery
Latch
Slots
Battery Latch
English
19
RADIO OVERVIEW
Attaching the Antenna
1. Align the threaded end of the antenna with the
radio’s antenna connector.
2. Turn the antenna clockwise to fasten it.
Removing the Antenna
1. Turn the antenna counter-clockwise until you
can remove it.
Note: These instructions apply ONLY to models
RDU4100 and RDV5100. Do not attempt to
remove the antenna if your radio is not one
of these models.
English
20
RADIO OVERVIEW
Installing Spring Action Belt clip.
1. Slide the spring action belt clip rails into the belt
clip grooves on the back of the battery pack and
slide it down until the belt clip tab snaps into
place.
2. To remove, pull back the metal release tab on
the belt clip tab and push the spring action belt
clip upward to remove.
Power Supply, Adaptor and Drop-in Tray
Charger
The radio is equipped with one Drop-in Tray Charger
and one Power Supply with Adaptor. For more
information, refer to “Chargers” on page 80.
Belt Clip
Tab
Spring Action
Belt Clip
Drop-in Tray Charger Power Supply
English
21
RADIO OVERVIEW
Battery Life Information
When the Battery Save feature is set to ON (enabled by default), the battery life lasts longer. The
following table summarizes battery life estimations:
Note: Battery life is estimated based on 5% transmit / 5% receive / 90% standby standard duty cycle.
Table 2: Li-Ion Battery Life with Battery Save feature ON
Battery Type 5 W 4 W
High Capacity 15 hr 15 hr
English
22
RADIO OVERVIEW
Charging the Battery
The RDX Series radio offers two types of
Chargers:
• Standard Charger and,
• Rapid Charger
Note: The radio comes with a Standard Power
Supply.
To charge the battery (with the radio attached),
place it in a Motorola Solutions-approved Drop-
in Tray Single Unit Charger or Drop-in Tray
Multi Unit Charger.
Note: When acquiring additional chargers or
power supplies, make sure you have similar
drop-in tray chargers and power supplies
sets (all “rapid” or all “standard”). For part
number details, refer to “Chargers” on
page 80.
Charging with the Drop-in Tray
Single Unit Charger (SUC)
1. Place the Drop-in Tray Charger on a flat
surface.
2. Insert the connector of the Power Supply into
the charger port on the back of the Drop-in Tray
Charger.
3. Plug the AC Adaptor into a power outlet.
4. Insert the radio into the Drop-in Tray Single Unit
Charger with the radio facing the front, as
shown.
Power Supply
(Transfo rmer)
Drop-in Tray Charger
Drop-in Tray
Charger Port
English
23
RADIO OVERVIEW
Note: When charging a battery attached to the
radio, turn the radio OFF to ensure a full
charge. See “Operational Safety Guidelines”
on page 12 for more information.
Charging A Stand-Alone Battery
To charge only the battery - at step 4 on page 22,
insert the battery into the tray, with the inside surface
of the battery facing the front of the Drop-in Tray
Single Unit Charger as shown above. Align the slots in
the battery with the alignment ribs in the Drop-in Tray
Single Unit Charger.
Note: Ensure that the bracket in the charger is
adjusted to the correct position for either
Standard or High capacity battery. See
“Charging a Standard Battery” on the right.
English
24
RADIO OVERVIEW
Drop-in Tray Charger LED Indicators
(*) Normally, re-positioning the battery pack will correct this issue.
Table 3: Standard Charger LED Indicator
Status LED Indicator Comments
Power On Steady red indication for 3 s The charger has powered up
Charging Blinking red (slow) The charger is currently charging
Charging Complete Steady red indication Battery is fully charged
Battery Fault (*) Blinking red (fast) Battery had a fault when battery was
inserted
English
25
RADIO OVERVIEW
Table 4: Rapid Charger LED Indicator
(*) Normally, re-positioning the battery pack will correct this issue.
(**) Battery temperature is too warm or too cold or wrong power voltage is being used.
Status LED Indicator Comments
Power On Steady green indication for 3 s The charger has powered up
Charging Blinking green The charger is currently charging
Top-off Charging Blinking green (slow) Battery is near fully charged
Charging Complete Steady green indication Battery is fully charged
Battery Fault (*) Blinking red (fast) Battery had a fault when battery was
inserted
Waiting to Charge (**) Double-blink yellow indications Battery charging conditions not
suitable
English
26
RADIO OVERVIEW
Estimated Charging Time
The following table provides the estimated charging time of the battery. For more information, see
“Audio Accessories” on page 79.
Table 5: Battery Estimated Charging Time
Charging Solutions
Estimated Charging Time
High Capacity Battery
Standard Charging
Solutions 12 hr
Rapid Charging Solutions 3 hr
English
27
RADIO OVERVIEW
Charging a Radio and Battery using
a Multi Unit-Charger - MUC (Optional
Accessory)
The Multi-Unit Charger (MUC) allows drop-in
charging of up to 6 radios or batteries. Batteries
can be charged with the radios or removed and
placed in the MUC separately. Each of the 6
charging pockets can hold a radio (with or
without the Holster) or battery, but not both.
1. Place the Multi-Unit Charger on a flat surface.
2. Insert the power cord plug into the MUC’s dual
pin connector .
3. Plug the power cord into an AC outlet.
4. Turn the radio OFF.
5. Set removable bracket for battery type
6. Insert the radio or battery into the charging
pocket with the radio.
Note:
• This Multi-Unit Charger clones up to 3 radios (3
Source radios and 3 Target radios). Refer to
“Cloning with a Multi Unit Charger (MUC)” on
page 53 for more information.
• More information on the Multi-Unit Charger’s
operation is available in the Instruction Sheets
provided with the MUC. For more information on
the parts and their part numbers, refer to Chapter
“Accessories” on page 79.
English
28
RADIO OVERVIEW
Multi-Unit Charger LED Indicators
(*) Normally, re-positioning the battery pack will correct this issue.
Table 6: MUC Charger LED Indicator
Status LED Indicator Comments
Charging Steady Red Indication The charger is currently charging
Charging Complete Steady Green Indication Battery is fully charged
Battery Fault (*) Blinking red (fast) Battery was faulty when inserted
English
29
GETTING STARTED
GETTING STARTED
For the following explanations, refer to “Parts Of The
Radio” on page 13.
TURNING RADIO ON/OFF
To turn ON the radio, rotate the On/Off/Volume Knob
clockwise. The radio plays one of the following:
• Power up tone and channel number
announcement, or
• Battery level and channel number
announcements, or
• Silent (Audible tones disabled)
The LED blinks red briefly.
To turn the radio OFF, rotate the On/Off/Volume Knob
counterclockwise until you hear a ‘click’ and the radio
LED Indicator turns OFF.
ADJUSTING VOLUME
Turn the On/Off/Volume Knob clockwise to increase
the volume, or counterclockwise to decrease the
volume.
Note: Do not hold the radio too close to the ear
when the volume is high or when adjusting
the volume
SELECTING A CHANNEL
To select a channel, turn the Channel Selector Knob
until you reach the desired channel. An audible voice
indicates the selected channel.
Each channel has its own Frequency, Interference
Eliminator Code and Scan Settings.
TALKING AND MONITORING
It is important to monitor for traffic before transmitting
to avoid ‘talking over’ someone who is already
transmitting
To monitor, long press and hold the SB1(*) button to
access channel traffic. If no activity is present, you will
hear ‘static’. To release, press SB1 again. Once
channel traffic has cleared, proceed with your call by
pressing the PTT button. When transmitting, the LED
Indicator stays solid red.
Note:
• To listen to all activity on a current channel, short
press the SB1 to set the CTCSS/DPL code to 0.
This feature is called ‘CTCSS/DPL Defeat
(Squelch set to SILENT)’.
• (*) This assumes SB1 is not being programmed
for a different mode.
English
30
GETTING STARTED
RECEIVING A CALL
1. Select a channel by rotating the Channel
Selector Knob until you reach the desired
channel. An audible voice indicates the
selected channel.
2. Make sure the PTT button is released and listen
for voice activity.
3. The LED Indicator stays solid red when the
radio is receiving a call.
4. To respond, hold the radio vertically 1 to 2
inches (2.5 to 5 cm) from mouth. Press the PTT
button to talk; release it to listen.
TALK RANGE
TALK RANGE
Model
Industrial Multi-Level
Inside steel/
concrete Industrial
buildings
Inside multi-
level buildings
UHF 4W Up to 350,000 ft2 Up to 30 Floors
VHF 5W Up to 300,000 ft2 Up to 18 Floors
English
31
GETTING STARTED
To establish a proper two-way communication, the
channel, frequency, and interference eliminator codes
must be the same on both radios. This depends on
the stored profile that has been preprogrammed on
the radio:
1. Channel: Current channel that the radio is
using, depending on radio model.
2. Frequency: The frequency the radio uses to
transmit/receive.
3. Interference Eliminator Code: These codes
help minimize interference by providing a
choice of code combinations.
4. Scramble Code: Codes that make the
transmissions sound garbled to anyone
listening who is not set to that specific code.
5. Bandwidth: Some frequencies have selectable
channel spacing, which must match other
radios for optimum audio quality (Only
applicable to RDU4103).
For details on how to set up frequencies and CTCSS/
DPL codes in the channels, refer to “Advanced
Configuration Mode” on page 36.
English
32
GETTING STARTED
RADIO LED INDICATORS
RADIO STATUS LED INDICATION
Channel Busy Solid Orange
Cloning Mode Double Orange Heartbeats
Cloning In Progress Solid Orange
Fatal Error at Power up One Green Blink, One Orange Blink, One Green Blink, then repeat for 4
seconds
Low Battery Orange Heartbeat
Low Battery Shutdown Fast Orange Heartbeat
Monitor LED is OFF
Power-Up Solid Red for 2 s
‘Idle’ Programming Mode /
Channel Mode Green Heartbeat
Scan Mode Fast Red Heartbeat
Transmit (TX)/Receive (RX) Solid Red
Transmit in Low Power Select Solid Orange
VOX/iVOX Mode Double Red Heartbeats
English
33
GETTING STARTED
HANDS-FREE USE/VOX
Motorola Solutions RDX Series radios can operate
hands-free (VOX) when used with compatible VOX
accessories.
With Compatible VOX Accessories
The default factory setting for VOX sensitivity level is
OFF (level ‘0’). Before using VOX, set VOX level to a
level different from ‘0’ via the Customer Programming
Software (CPS). Then, perform the following steps:
1. Turn the radio OFF.
2. Open accessory cover.
3. Insert the audio accessory’s plug firmly into
accessory port.
4. Turn radio ON. The LED Indicator will blink
double red
5. Lower radio volume BEFORE placing
accessory near ear.
6. To transmit, speak into accessory microphone
and to receive, stop talking.
7. VOX can be temporarily disabled by pressing
the PTT button or by removing the audio
accessory.
VOX can also be activated using the (Menu) button
without using the CPS.
Note: To order accessories, refer to:
www.motorolasolutions.com/RDX,
call 1 (800) 448-6686, or contact your
Motorola Solutions point of purchase.
VOX
Accessory
Accessory Port/
Connector
English
34
GETTING STARTED
Hands Free without Accessories (iVOX)
• Enable iVOX by pressing the PTT Button while
turning ON the radio.
• A short press of the PTT Button re-enables iVOX.
• There is a short delay between the time when you
start talking and when the radio transmits.
SETTING VOX/IVOX SENSITIVITY
The sensitivity of the radio's accessory or microphone
can be adjusted to suit different operating
environments. VOX sensitivity can be programmed
via the CPS.
Default value is OFF. If you want to use the VOX
feature, VOX level should be set at a different level.
• 1 = High audio input level will trigger the Tx
• 2 = Medium sensitivity
• 3 = Low audio input level will trigger the Tx
TOGGLE VOICE PROMPT IN USER MODE
Short press the SB1 Button while turning ON the radio
to enable/disable the Voice Prompt in User Mode.
(Default is set to ON).
POWER UP - TONE MODE
To enable/disable power up tone mode, press SB1
and SB2 buttons simultaneously for 2-3 seconds while
powering up the radio until you hear the pre-
programmed power up tone. Three different power-up
tones are available.
RESET TO FACTORY DEFAULTS
Reset to Factory Defaults will set back all radio
features to the original factory default settings. To do
so, press PTT, SB2 and SB1 simultaneously while
turning ON the radio until you hear a high tone chirp.
MICROPHONE GAIN
The sensitivity of the microphone can be adjusted to
fit different users or operating environments.
This feature can be adjusted only through the CPS.
Microphone default setting is set to level 2 (medium
gain).
English
35
GETTING STARTED
NOTES
English
36
PROGRAMMING FEATURES
PROGRAMMING
FEATURES
To easily program all the features in your radio, it is
recommended to use the Customer Programming
Software (CPS) and the programming cable.
CPS software download is available for free at
www.motorolasolutions.com/RDX.
ADVANCED CONFIGURATION MODE
Advanced Configuration is a configuration mode that
allows the customization of additional features via the
radio’s front panel.
For non-display model radios, the navigation is guided
by an audible voice prompt.
When the radio is set to Advanced Configuration, you
are able to read and modify four features:
• Frequency Selection,
• Codes (CTCSS/DPL),
• Auto-Scan,
• Active Channels, and
• Enable/Disable/Program the Weather Channel
The Frequencies Select feature allows you to
choose frequencies from a pre-defined list.
The Interference Eliminator Code (CTCSS/ DPL)
helps minimize interference by providing you with a
choice of code combinations that filter out static,
noise, and unwanted messages.
The Auto-Scan feature allows you to set a particular
channel to automatically enable Scan each time you
switch to that channel.
The Active Channels feature allows you to increase
or decrease the amount of active channels (In the
range of maximum channels allowed).
The Weather Programming feature allows you to
alternate the channel function between 2 way radio
channel and weather channel. There are seven
received frequencies available for this feature.
Entering Advanced Configuration Mode
Note: Before configuring the features, make sure
your radio is set to the channel you wish to
program. You can do so before entering
Advanced Configuration Mode or at any
time during the Advanced Configuration
Mode by rotating the Channel Selector Knob
until you reach the desired channel.
To read or modify Frequencies, Codes, Auto- Scan,
Active Channels and Weather Channel set the radio
to ‘Advanced Configuration Mode’ by long pressing
English
37
PROGRAMMING FEATURES
both the PTT and the SB1 button simultaneously for 3
to 5 seconds while turning ON the radio until you hear
an audible voice saying “Programming Mode” and
“Channel Number”. The LED Indicator starts blinking a
green heartbeat.
Note: ‘Idle’ Programming Mode is the stage in the
Programming Mode where the radio waits
for the user to start the radio programming
cycle.
Once you are in the ‘Idle’ Programming Mode, you will
be able to hear the Frequencies, Codes, Auto-Scan,
Active Channels and Weather Channel settings by
short pressing the PTT button to navigate along the
different programmable features.
ENTERING FREQUENCIES VALUES
RDU4100 has 89 frequencies, 27 frequencies for
RDV5100 and 2 for RDU4103.
• In ‘Idle’ Programming mode, the Channel number
becomes the first changeable value. Select the
desired channel by turning the Channel Selector
Knob. An audible voice indicated the selected
channel to configure. Short pressing the PTT
button allows you to cycle through the other
features available for configuration. Use the SB1
and SB2 button to change the values. An audible
voice indicates the value selected.
READING CTCSS/DPL VALUES
Cycle through the features available for configuration
by short pressing the PTT button until you hear the
current code. The radio moves to the programming
CTCSS/PL codes mode.
Enter a new code value using the SB1 and SB2
buttons.
The RDX Series radios have up to 219 codes
available. For more information, refer to “Frequency
and Code Charts” on page 64.
READING AUTO-SCAN VALUES
After hearing the CTCSS/DPL codes, short pressing
the PTT button moves you to Auto- Scan mode.
Auto-Scan has only two values:
• Enabled
• Disabled
English
38
PROGRAMMING FEATURES
ACTIVE CHANNELS
While in Auto-Scan mode, short pressing the PTT
button shifts the radio to ‘Active Channels’ feature.
Modify the amount of channels available using the
SB1 and SB2 buttons.
WEATHER CHANNEL PROGRAMMING
(NOT FOR RDU4103)
After setting the amount of Active Channels, short
pressing the PTT button moves you to Weather
Channel feature.
Use the SB1 and SB2 buttons to Enable/ Disable the
feature.
SAVING SETTINGS
Once you are satisfied with the settings, you can
either:
• short press the PTT button to continue
programming,
• long press the PTT button to save and return to
‘Idle’ Programming Mode, or
• long press the PTT button twice to exit ‘Idle’.
PROGRAMMING MODE FAQ
I got distracted while programming and forgot which
feature I was programming. What should I do?
• Return to ‘Idle’ Programming Mode and start
over. You will not be able to return to
Programming Mode (the radio does not provide
further way to let you know the specific stage you
are at in the Programming Mode).
• Therefore you can:
• Long press the PTT button. The radio will
return to ‘Idle’ Programming Mode or,
• Turn OFF the radio and enter Programming
Mode again. (Refer to “Entering Advanced
Configuration Mode” on page 36 for more
information)
I am trying to program a frequency (or a code) value
but the radio would not do it. It rolled over and took me
back to value ‘0’.
• The radio disallows you to program any value
that is not available in the frequencies and codes
pool. For example, if you try to program code
220, the radio would not accept it as the
maximum value allowed is 219. Same goes for
the frequencies. Refer to the “Frequency and
English
39
PROGRAMMING FEATURES
Code Charts” on page 64 to make sure you are
programming a valid value.
I am trying to enter the Programming Mode but the
radio would not do it.
• The radio may be locked using the CPS to
disallow Front Panel Programming. To re- enable,
use the CPS.
I programmed the wrong value when I was
programming. How can I erase or re-program the
value?
If you programmed the wrong value, you can either:
• ‘Roll-over’ the radio. The radio ‘roll-over’ each
time it reaches the maximum value allowed.
Keep increasing (short press the SB1 button)
or decreasing (short press the SB2 button) until
you get the desired value or,
• Turn OFF the radio and start over.
I just programmed the value I wanted. How do I exit
the Programming Mode?
You can either:
• Long press the PTT button twice to exit if
you’re in the Programming Mode or,
• Long press the PTT button once if you are
already in the ‘Idle’ Programming mode.
I am done programming the features in this channel.
How do I program another channel?
• Short press the PTT button several times until
you hear “Channel Number”. Switch channel by
rotating the Channel Selector Knob. If you wish to
save the changes, make sure you are in the ‘Idle’
Programming Mode before switching the
channel, otherwise you will lose the changes
made.
PROGRAMMING VALUES EXAMPLES
Example of Programming a Frequency
Assuming current frequency value is set to Channel 1,
with the UHF default frequency set to ‘02’ (equivalent
to 464.5500 MHz), and you want to change it to
Frequency Number = ‘13’ (which is mapped to
461.1375 MHz), follow this sequence:
1. Enter Advanced Configuration Mode.
2. Short press the PTT button to enter Frequency
Mode. The radio audible voice announces that
the current value is ‘2’.
English
40
PROGRAMMING FEATURES
3. Press the SB1 button eleven times to increase
frequencies and you will hear frequency “One,
three” (13).
4. Long press the PTT button. LED Indicator
shows a green heartbeat to indicate ‘Idle’
Programming Mode.
5. Long press the PTT button again to exit
Programming Mode or turn OFF the radio.
Example of Programming a Code
Assuming the current code value is set to factory
default ‘001’, and you want to change it to CTCSS/
DPL Code = 103. Follow the sequence indicated
below:
1. Enter Advanced Configuration Mode.
2. Short press the PTT button twice. The radio
audible voice announced “Code Number”
(Entering CTCSS/DPL Programming Selection
Mode).
3. Pressing and holding SB1 or SB2 button fast
forwards / rewinds the value at the nearest 10’s.
When released, the radio audible voice
announces the first, second and third digit in
full. Keep pressing the SB1 or SB2 button
several times until you hear “103”.
4. Long press the PTT button. LED Indicator
shows a green heartbeat to indicate ‘Idle’
Programming Mode.
5. Long press the PTT button again to exit
Programming Mode or turn OFF the radio.
Example of Programming Auto-Scan
Auto-Scan is the third available feature in the
Programming Mode and can be set to either ON or
OFF on a particular channel.
To set Auto-Scan to ON:
1. Enter Advanced Configuration Mode and select
the desired channel.
2. Short press the PTT button three times to enter
the Active Channels Programming Selection
Mode. The audible voice in the radio
announces “Auto-Scan” and the setting
(Enabled or Disabled).
3. To change the setting, press SB1 or SB2.
4. Long press the PTT button. LED Indicator
English
41
PROGRAMMING FEATURES
shows a green heartbeat to indicate ‘Idle’
Programming Mode.
5. Long press the PTT button again to exit
Programming Mode or turn OFF the radio.
Example of Programming Active Channels
Active Channels is the fourth* Programming Mode. It
allows you to modify the number of active channels
the radio is programmed to support.
To set Active Channels:
1. Enter Advanced Configuration Mode and select
the desired channel.
2. Short press the PTT button four times to enter
the Active Channels Programming Selection
Mode. The audible voice in the radio
announces “Active Channels” and the current
value.
3. Short press the SB1 or SB2 button until you get
the number of channels desired.
4. Long press the PTT button. LED Indicator
shows a green heartbeat to indicate ‘Idle’
Programming Mode.
5. Long press the PTT button to exit Programming
Mode or turn OFF the radio.
Note: (*) For RDU4103 it is the fifth menu.
Example of Programming Weather
Channels (Not valid for RMU4103)
Weather Channels is the last Programming mode. It
allows you to toggle a radio channel between 2 way
radio mode and weather alert mode.
To set channels to Weather Alert Mode:
1. Enter Advanced Configuration Mode and select
the desired channel.
2. Short press the PTT button five times to enter
the Weather Channels Programming Mode.
3. An audible voice announces "Weather Channel
and Frequency Used" and instructions on how
to change values. Refer to "Weather Channel
Frequencies Table" on Short press the SB1 or
SB2 button to enable/disable the feature.page
48 for the frequency table.
4. Short press the SB1 or SB2 button to enable/
disable the feature.
5. Long press the PTT button. LED Indicator
English
42
PROGRAMMING FEATURES
shows a green heartbeat to indicate ‘Idle’
Programming Mode.
6. Long press the PTT button again to exit
Programming mode or turn OFF the radio.
OTHER PROGRAMMING FEATURES
Scan
Scan allows you to monitor other channels to detect
conversations. When the radio detects a transmission,
it stops scanning and goes to the active channel. This
allows you to listen and talk to people in that channel
without having to change channel manually. If there
are transmissions on another channel, you will not
hear that activity once the radio has stopped
scanning. Once the activity on transmitting channel
stops, the radio waits for 5 seconds before resuming
scan again.
• To start scanning, press the SB1 or SB2
button.
Notes: Scan has to be programmed either to SB1
or SB2 button via CPS. SB2 is by default
Scan/Nuisance Channel delete button.
• To stop scanning, short press the SB1 or SB2
button (programmed for scan) again.
• By pressing the PTT button while the radio is
scanning, the radio will transmit on the channel
which was previously selected before Scan is
activated. If no transmission occurs within 5
seconds, scanning resumes.
• If you want to scan a channel without the
Interference Eliminator Codes (CTCSS/DPL),
set the code settings for the channels to ‘0’ in
the CTCSS/DPL Programming Selection Mode
Notes: Whenever the radio is set to Scan, the LED
Indicator blinks a Red Heartbeat.
Editing Scan List
Scan List can be edited by using the CPS. For more
information refer to “Customer Programming Software
(CPS)” on page 43
Nuisance Channel Delete
Nuisance Channel Delete allows you to temporarily
remove channels from the Scan List. This feature is
useful when irrelevant conversations on a ‘nuisance’
channel ties up the radio’s scanning feature.
To delete a channel from the Scan List:
• Start Scan mode by short pressing the SB1 or
SB2 (programmed for scan) button.
English
43
PROGRAMMING FEATURES
• Wait until the radio stops at the channel you wish
to eliminate. Long press the SB2 button to delete
it. You cannot delete the channel with scan
enabled (home channel).
• The channel will not be scanned again until you
exit the Scan mode by short pressing the SB1 or
SB2 (programmed for scan) button again or by
turning OFF the radio and back ON.
CUSTOMER PROGRAMMING SOFTWARE
(CPS)
Figure 1: Setting up the radio to the CPS
The easiest way to program or change features in
your radio is by using the Customer Programming
Software (CPS) and the CPS Programming Cable(*).
CPS Software is available for free as web based
downloadable software at:
www.motorolasolutions.com/RDX
To program, connect the RM Series radio via the
Drop-in Charger Tray and CPS Programming Cable
as shown in Figure 1 on page 43. Toggle the cable
switch of the CPS Programming Cable to ‘CPS
Mode’.
CPS allows you to program frequencies, PL/DPL
Codes as well as other features such as: Bandwidth
Select, Time-out Timer, Power Select, Scan List, Call
Tones, Scramble, Reverse Burst, etc. CPS is a very
useful tool as it can also lock the Front-Panel Radio
Programming or restrict any specific radio feature to
be changed (to avoid accidentally erasing the preset
radio values). It also provides security by giving the
option to set up a password for profile radio’s
management. For more information, refer to Features
Summary Chart Section at the end of the User Guide.
Note: (*) CPS Programming Cable P/N#
HKKN4027_ is an accessory sold
separately. Please contact your Motorola
Drop-In Tray Charger Tray
Radio to be
programmed
USB Ports
CPS Programming Cable
English
44
PROGRAMMING FEATURES
Solutions point of purchase for more
information.
Time-Out Timer
This timer sets the amount of time that the radio can
continuously transmit before the transmission is
automatically terminated. The default setting is 60
seconds and can be changed using the CPS.
Power Select
Power Select allows you to select between high and
low transmission power per frequency in each
channel. The power levels for RDX High Power are 2/
4W for UHF and 2/5W for VHF.
Call Tones
Call Tones feature allows you to transmit an audible
tone to other radios on the same channel to alert them
that you are about to talk or to alert them without
speaking.
To use this feature, the Call Tones must be
programmed to either SB1 or SB2 and 1 of the 3 pre-
recorded tones is selected.
Scramble
The Scramble feature makes transmissions sound
garbled to anyone listening without the same code.
Scramble default value is OFF. To change the
scramble code during radio’s normal operation, the
Scramble feature must be programmed to either SB1
or SB2.
Reverse Burst
Reverse Burst eliminates unwanted noise (squelch
tail) during loss of carrier detection. You can select
values of either 180 or 240 to be compatible with other
radios. The default value is 180.
Notes:
• The features described in previous pages are just
some of the features CPS has. CPS offers more
capabilities. For more information refer to the
HELP file in the CPS.
• Some of the features available with the CPS
software may vary depending on the radio model.
TEXT-TO-SPEECH (CHANGING PRE-
DEFINED VOICE ALIASES)
Enable User Pre-Defined Voice Prompt (VP)
Checkbox
Check the box to enable user-defined voice on the
selected channel. The user is given the option to
English
45
PROGRAMMING FEATURES
either use the Text-to-Speech synthesizer in order to
generate automated voice, or import a wave (.wav) file
containing the voice data.
User Pre-Defined Voice Prompt (VP) Text
This field is used by the Text-to-Speech synthesizer
embedded in the CPS to generate user-defined voice
for the selected channel.
Note:
• The length of the string cannot exceed 18
characters.
• The string can only contain ISO-8859-1
characters.
Import Voice File
This field allows the user to upload a pre- existing
wave (.wav) file from the local hard drive. The first
eight characters of the wave files are used to populate
the channel “Name”.
Note:
• The wave file must be sampled at 8 kHz.
• The wave file cannot exceed 65,000 kB in
length.
Listen to User Customized Voice Prompt
(VP) Text
This field allows the user to play the output voice
signal generated from the Text-to-Speech synthesizer.
WEATHER FEATURE (NOT FOR RDU4103)
The RDX radio weather mode can be programmed to
operate and receive weather channels that are
broadcast by the National Weather Radio (NWR). The
NWR system is a nationwide network of radio stations
(more than 1000 stations in United States) that
broadcast continuous weather information for the
public. The NWR broadcasts all types of weather
service warnings, watches, forecasts and other
hazard information. The NWR can also broadcast
non- weather alerts such as national security, natural,
environmental, and public safety in conjunctions with
the Emergency Alert System (EAS).
The RDX radio weather feature can detect weather
alerts/warnings that are broadcast by NWR. The
RDX+ radio can be programmed to detect the analog
tone or digital-over-audio protocol. The analog tone is
a 1050 Hz tone (Warning Alarm Tone), which is issued
for 10 seconds immediately before the warning
message by the NWR transmitter. When RDX radio
detects the Warning Alarm tone, it unmutes audio and
English
46
PROGRAMMING FEATURES
allows the user to hear the weather alert message. As
for digital-over- audio protocol, it is a newer
technology called Specific Area Message Encoding
(SAME) that allows weather radio to receive digital
data stream about the type of weather events, timing,
duration, and location. When RDX radio detects these
special warnings, the radio can be programmed to
automatically generate a loud tone, enable LED
indicator, and display “hazard” status on the display.
With the SAME technology, the RDX radio weather
mode can be programmed to detect the type of
weather warnings or watches for a specified the
county or counties.
Further information about the National Weather Radio
system such as network updates, transmitter
coverage maps, and SAME event codes can be found
on the Internet at www.nws.noaa.gov/nwr/.
Weather Alert Mode
Select the alert mode the radio will respond to alerts
sent from the National Weather Service, which
transmitted prior to the broadcast of any message
about a life or property threatening event.
Choices available are:
• OFF (Default): Disable the Weather Alert
Feature.
• Tone Alert: Detect the Warning Alarm Tone
(WAT).
• SAME Alert: Detect the Special Area Message
Encoding (SAME).
Weather Channel Frequencies Table
Frequency Number Value (Mhz)
1 162.4000
2 162.4250
3 162.4500
4 162.4750
5 162.5000
6 162.5250
7 162.5500
English
48
PROGRAMMING FEATURES
• 0 – forever until a button is pressed, or user
switches channel, or the new alert message is
expired.
• 5 min.
• 10 min.
• 30 min.
Note: Embedded in the SAME message is the
duration of the alert message. The RDX
radio continues to display the alert until the
duration expiration time.
EVENT TYPE FILTER
The RDX radio is a programmable weather radio that
allows users to choose the type of weather warnings
and watches that will alarm. The radio can be
programmed to allow or block an event by its type.
All Events
When checked, the radio allows for all SAME events.
Alert Test Event
When SAME alert is enabled, the radio responds to
any test events. When checked, the radio alerts the
same way as other SAME alert messages. When
unchecked, the radio displays only the Message,
lights the alert LED without unmuting the radio. The
radio does not play the new alert tone at this time.
Note: No matter how the user programs the event
filter, some critical events cannot be
blocked. The National Weather Service
broadcast a test alert every week on
Wednesday between 11 AM and Noon.
Users should use test alert to ensure that
their radios are functioning properly. See
also: The Critical Events Table.
WARNING
When checked, the radio allows all warning events.
Warning events are events that alone pose a
significant threat to public safety and/or property.
Note: No matter how the user programs the event
filter, some critical events cannot be
blocked. See also: “The Critical Events
Table” on page 50.
WATCH
When checked, the radio allows all watch events.
Watches are events that meet the classification of a
warning, but either the onset time, probability of
occurrence or location is uncertain.
English
49
PROGRAMMING FEATURES
Note: No matter how the user programs the event
filter, some critical events cannot be
blocked. See also: “The Critical Events
Table” on page 50.
EMERGENCY
When checked, the radio allows all emergency
events. Emergency event is an event that by itself
would not kill or injure or do property damage, but
indirectly may cause other things to happen that result
in a hazard.
Note: No matter how the user programs the event
filter, some critical events cannot be
blocked. See also: “The Critical Events
Table” on page 50.
STATEMENT
When checked, the radio allows all statement events.
Statement is message that contains follow-up
information to a warning, watch, or emergency.
Note: No matter how the user programs the event
filter, some critical events cannot be
blocked. See also: “The Critical Events
Table” on page 50.
EVENT CODE FILTER
A specific SAME event can be allowed or blocked.
There are maximum of five Event Codes can be
programmed.
BLOCK EVENT
When checked, the Event Codes entered below shall
be blocked.
Note: No matter how the user programs the event
filter, some critical events cannot be
blocked. See also: “The Critical Events
Table” on page 50.
EVENT CODE
The Event Code field accepts wild card (“*”). The
following are examples of valid Event Code format.
• “***” - all events
• FL “*” – FLA or FLW
• FLA
The “blank” means unprogrammed and the radio will
bypass it without doing anything.
Note: No matter how the user programs the event
filter, some critical events cannot be
English
50
PROGRAMMING FEATURES
blocked. See also: “The Critical Events
Table” on page 50.
THE CRITICAL EVENTS TABLE
Abbreviation Description
BHW Biological Hazard
Warning
CDW Civil Danger Warning
CEM Civil Emergency
Message
CHW Chemical Hazard
Warning
CWW Contaminated Water
Warning
DBW Dam Break Warning
DEW Contagious Disease
Warning
EAN Emergency Action
Notification
EAT Emergency Action
Termination
EQW Earthquake Warning
EVI Evacuation
Immediate
FCW Food Contamination
Warning
HMW Hazardous Materials
Warning
HUW Hurricane Warning
IEW Immediate
Evacuation Warning
Abbreviation Description
English
52
PROGRAMMING FEATURES
GEOGRAPHIC FILTER
There are maximum of six geographic codes can be
programmed. When all fields are unselected, or any of
the geographic code is “ALL” for both State and
County code (FIPS is “000000”), the radio bypasses
the Geographic Filter check.
There are two ways to enter the geographic code,
• Select State and County Code
• Enter the FIPS code directly (must be 6 digits)
STATE
Selects the State, Territory and Offshore (Marine
Area) portion (SS) the radio alerts for.
COUNTY
Select a county, province, or major metropolitan area
(CCC) the radio alerts for.
FIPS
Federal Information Processing Standards (FIPS)
contains six digits which represent PSSCCC, where P
is the region code, SS is the state code and CCC is
the county code.
Enters/Edits a specific FIPS whenever it is necessary.
Further information about FIPS can be found on the
Internet at www.nws.noaa.gov/nwr/ indexnw.htm or
call the National Weather Service Toll-Free Number
SAME county code – 1888-NWS-SAME (1-888-697-
7263).
CLONING RADIOS
You can clone RDX Series radio profiles from one
Source radio to a Target radio by using any one of
these three methods:
• Using a Multi Unit Charger (MUC- optional
accessory),
• Using two Single Unit Chargers (SUC) and a
Radio-to-Radio cloning cable (optional
accessory),
• the CPS (free software download)
English
53
PROGRAMMING FEATURES
Cloning with a Multi Unit Charger (MUC)
To clone radios using the MUC, there must be at least
two radios:
• a Source radio (the radio which profiles will be
cloned or copied from) and
• a Target radio (the radio which profile will be
cloned from the source radio.)
The Source radio has to be in Pocket 1, 3 or 5 while
the Target radio has to be in Pocket 2, 4 or 6,
matching in the MUCs pockets by pairs as follows:
• 1 and 2 or,
• 3 and 4 or,
• 5 and 6 (*).
When cloning, the MUC does not need to be plugged
into a power source, but ALL radios require charged
batteries.
1. Turn ON the Target radio and place it into one of
the MUC Target Pockets.
2. Power the Source radio following the sequence
below:
• Long Press the PTT button and SB2
simultaneously while turning the radio
ON.
• Wait for 3 seconds before releasing the
buttons until the audible tone “Cloning” is
heard.
3. Place the Source radio in the source pocket that
pairs with the target pocket you chose in step 1.
Press and release the SB1 button.
4. After cloning is completed, the Source radio will
announce either “successful” (cloning is
successful) or “fail” (cloning has failed). The
‘successful’ tone sounds like a good key ‘chirp’
whereas the ‘fail’ tone sounds similar to a ‘bonk’
tone. If the Source radio is a display model, it
Pocket 1
“CLONE” symbol Pocket 2 “CLONE” symbol Pocket 5
Pocket 4
English
54
PROGRAMMING FEATURES
will either show ‘Pass’ or ‘Fail’ on the display (a
tone will be heard within 5 s).
5. Once you have completed the cloning process,
turn the radios OFF and ON or, long press the
PTT button to exit the ‘cloning’ mode.
Further details on how to clone radios are explained in
the Instructions Sheet provided with the MUC.
When ordering the MUC, refer to P/N# RLN6309_.
Notes:
• If cloning fails, refer to “What To Do If Cloning
Fails” on page 55.
• Paired Target radios and Source radios must be
of the same band type in order for the cloning to
run successfully.
• MUC pockets numbers should be read from left to
right with the Motorola Solutions logo facing front.
Cloning Radio using the Radio to Radio
(R2R) Cloning Cable (Optional Accessory)
Operating Instructions
1. Before starting the cloning process, make sure
you have:
• A fully charged battery on each of the radios.
• Two Single-Unit Chargers (SUC).
• Turn OFF the radios and,
• Both radios are of the same radio model.
2. Unplug any cables (power supply or USB
cables) from the SUCs.
English
55
PROGRAMMING FEATURES
3. Plug one side of the cloning cable mini USB
connector to the first SUC and the other end to
the second SUC.
Note: During the cloning process, no power is
being applied to the SUC. The batteries will
not be charged. Only data communication is
being established between the two radios.
4. Turn ON the Target Radio and place it into one
of the SUCs.
5. For the Source Radio, power ON the radio with
the following sequence:
• Long press the PTT button and SB2
simultaneously while turning the radio ON.
• Wait for 3 s before releasing the buttons until a
distinctive audible tone is heard.
6. Place the Source radio in its SUC, press and
release SB1.
7. After cloning is completed, the Source radio will
sound either a ‘pass’ tone (cloning was
successful) or a ‘fail’ tone (cloning process has
failed). The ‘pass’ tone sounds like a good key
‘chirp’ whereas the ‘fail’ tone sounds similar to a
‘bonk’ tone. If the Source radio is a display
model, it will either show ‘Pass’ or ‘Fail’ on the
display (a tone will be heard within 5 seconds).
8. Once you have completed the cloning process,
turn the radios OFF and ON to exit ‘clone’
mode.
What To Do If Cloning Fails
The radio will emit an audible “bonk” indicating that
the cloning process has failed. In the event that the
cloning fails, perform each of the following steps
before attempting to start cloning process again:
1. Ensure that the batteries on both radios are fully
charged.
2. Check the cloning cable connection on both
SUCs.
3. Ensure that the battery is engaged properly on
the radio.
4. Ensure that there is no debris in the charging
tray or on the radio contacts.
5. Ensure that the Target radio is turned ON.
6. Ensure that the Source radio is in cloning mode.
English
56
PROGRAMMING FEATURES
7. Ensure that the two radios are both from the
same frequency band, same region and have
the same transmission power.
Note: This cloning cable is designed to operate
only with compatible Motorola SUC
RLN6175_ and RLN6304_.
When ordering Optional Cloning Cable, please refer
to P/N# RLN6303_. For more information about the
accessories, refer to “Accessories” on page 79.
Cloning using the Customer Programming
Software (CPS)
When cloning using this method, you need the CPS
software, a Drop-In Tray Charger and the CPS
Programming Cable.
To order the CPS Programming Cable, please refer to
P/N# RKN4155_.
Information on how to clone using the CPS is
available either in:
• the CPS Help File --> Content and Index -->
Cloning Radios, or
• in the CPS Programming Cable Accessory
Leaflet.
Drop-In Tray Charger Tray
Radio to be
programmed
USB Ports
CPS Programming Cable
English
57
PROGRAMMING FEATURES
NOTES
English
58
TROUBLESHOOTING
TROUBLESHOOTING
Symptom Try This...
No Power
Recharge or replace the Li-Ion battery.
Extreme operating temperatures may affect battery life.
Refer to “About the Li-Ion Battery” on page 16.
Hearing other noises or
conversation on a channel
Confirm Interference Eliminator Code is set.
Frequency or Interference Eliminator Code may be in use.
Change settings: either change frequencies or codes on all radios.
Make sure radio is at the right frequency and code when transmitting.
Refer to “Talking and Monitoring” on page 29.
Message Scrambled Scramble Code might be ON, and/or setting does not match the other radios'
settings.
Audio quality not good enough Radio settings might not be matching up correctly. Double check frequencies,
codes and bandwidths to make sure they are identical in all radios.
English
59
TROUBLESHOOTING
Limited talk range
Steel and/or concrete structures, heavy foliage, buildings or vehicles decrease
range. Check for clear line of sight to improve transmission.
Wearing radio close to body such as in a pocket or on a belt decreases range.
Change location of radio. To increase range and coverage, you can reduce
obstructions or increase power. UHF radios provides greater coverage in
industrial and commercial buildings. Increasing power provides greater signal
range and increased penetration through obstructions.
Refer to “Talking and Monitoring” on page 29.
Message not transmitted or
received
Make sure the PTT button is completely pressed when transmitting.
Confirm that the radios have the same Channel, Frequency, Interference
Eliminator Code and Scramble Code settings. Refer to “Talking and Monitoring”
on page 29 for further information.
Recharge, replace and/or reposition batteries. Refer to “About the Li-Ion
Battery” on page 16.
Obstructions and operating indoors, or in vehicles, may interfere. Change
location. Refer to “Talking and Monitoring” on page 29.
Verify that the radio is not in Scan. Refer to “Scan” on page 42 and “Nuisance
Channel Delete” on page 42.
Symptom Try This...
English
61
TROUBLESHOOTING
Cannot activate VOX
VOX feature might be set to OFF.
Use the CPS to ensure that the VOX Sensitivity level is not set to ‘0’.
Accessory not working or not compatible.
Refer to “Hands-Free Use/VOX” on page 33.
Battery does not charge
although it has been placed in
the drop-in charger for a while
Check drop-in tray charger is properly connected and correspond to a
compatible power supply.
Refer to “Charging with the Drop-in Tray Single Unit Charger (SUC)” on
page 22 and “Charging A Stand-Alone Battery” on page 23.
Check the charger’s LEDs indicators to see if the battery has a problem. Refer
to “Drop-in Tray Charger LED Indicators” on page 24.
User voice prompt does not
clone.
Check the front radio name plate. Radios with an orange color font will not
support customize voice prompt.
Note: Whenever a feature in the radio seems to not correspond to the default or preprogrammed values, check
to see if the radio has been programmed using the CPS with a customized profile.
Symptom Try This...
English
62
USE AND CARE
Use a soft damp cloth
to clean the exterior
Do not immerse
in water
Do not use alcohol or
cleaning solutions
Turn radio OFF and
remove batteries
Dry with soft cloth Do not use radio until
completely dry
If the radio is submerged in water...
USE AND CARE
English
63
USE AND CARE
NOTES
English
65
FREQUENCY AND CODE
CHARTS
Note: (*) Default Frequencies
Note: (**) Warning, Receive only Frequency
RDX VHF 10CH Radios Default Frequencies – RDV5100
Channel Frequency # Frequency
(MHz) Code# Code Bandwidth
1 1 1151.6250 67.0 Hz 12.5 kHz
2 1 4151.6250 77.0 Hz 12.5 kHz
3 1 8151.6250 88.5 Hz 12.5 kHz
4 1 151.6250 29 179.9 Hz 12.5 kHz
5 1 0 -151.6250 12.5 kHz
6 2 1151.9550 67.0 Hz 12.5 kHz
7 2 6151.9550 82.5 Hz 12.5 kHz
8 WC 162.4000 10 67.0 Hz 25.0 kHz
9 2 151.9550 29 179.9 Hz 12.5 kHz
10 2 0 -151.9550 12.5 kHz
Notes: WC = Weather Channel Frequency
English
66
FREQUENCY AND CODE
CHARTS
RDX UHF FREQUENCIES CHART
RDX UHF Frequencies
Frequency # Frequency (MHz) Bandwidth Frequency # Frequency (MHz) Bandwidth
1 464.5000 15 461.187512.5 kHz 12.5 kHz
2 464.5500 16 461.212512.5 kHz 12.5 kHz
*3 467.7625 17 461.237512.5 kHz 12.5 kHz
*4 467.8125 18 461.262512.5 kHz 12.5 kHz
*5 467.8500 19 461.287512.5 kHz 12.5 kHz
*6 467.8750 20 461.312512.5 kHz 12.5 kHz
*7 467.9000 21 461.337512.5 kHz 12.5 kHz
*8 467.9250 22 461.362512.5 kHz 12.5 kHz
9 461.0375 462.762512.5 kHz *23 12.5 kHz
10 461.0625 462.787512.5 kHz *24 12.5 kHz
11 461.0875 462.812512.5 kHz *25 12.5 kHz
12 461.1125 462.837512.5 kHz *26 12.5 kHz
13 461.1375 462.862512.5 kHz *27 12.5 kHz
14 461.1625 462.887512.5 kHz *28 12.5 kHz
English
67
FREQUENCY AND CODE
CHARTS
Frequency # Frequency (MHz) Bandwidth Frequency # Frequency (MHz) Bandwidth
*29 462.9125 47 466.362512.5 kHz 12.5 kHz
30 464.4875 467.787512.5 kHz *48 12.5 kHz
31 464.5125 467.837512.5 kHz *49 12.5 kHz
32 464.5375 467.862512.5 kHz *50 12.5 kHz
33 464.5625 467.887512.5 kHz *51 12.5 kHz
34 466.0375 467.912512.5 kHz *52 12.5 kHz
35 466.0625 53 469.487512.5 kHz 12.5 kHz
36 466.0875 54 469.512512.5 kHz 12.5 kHz
37 466.1125 55 469.537512.5 kHz 12.5 kHz
38 466.1375 56 469.562512.5 kHz 12.5 kHz
39 466.1625 57 462.187512.5 kHz 12.5 kHz
40 466.1875 58 462.462512.5 kHz 12.5 kHz
41 466.2125 59 462.487512.5 kHz 12.5 kHz
42 466.2375 60 462.512512.5 kHz 12.5 kHz
43 466.2625 61 467.187512.5 kHz 12.5 kHz
44 466.2875 62 467.462512.5 kHz 12.5 kHz
45 466.3125 63 467.487512.5 kHz 12.5 kHz
46 466.3375 64 467.512512.5 kHz 12.5 kHz
RDX UHF Frequencies (Continued)
English
68
FREQUENCY AND CODE
CHARTS
Note: (*) Frequency limited to 2 W maximum power output.
Frequency # Frequency (MHz) Bandwidth Frequency # Frequency (MHz) Bandwidth
65 451.1875 82 456.437512.5 kHz 12.5 kHz
66 451.2375 83 456.537512.5 kHz 12.5 kHz
67 451.2875 84 456.637512.5 kHz 12.5 kHz
68 451.3375 85 457.312512.5 kHz 12.5 kHz
69 451.4375 86 457.412512.5 kHz 12.5 kHz
70 451.5375 87 457.512512.5 kHz 12.5 kHz
71 451.6375 88 457.762512.5 kHz 12.5 kHz
72 452.3125 89 457.862512.5 kHz 12.5 kHz
73 452.5375 90 468.212512.5 kHz 12.5 kHz
74 452.4125 91 468.262512.5 kHz 12.5 kHz
75 452.5125 92 468.312512.5 kHz 12.5 kHz
76 452.7625 93 468.362512.5 kHz 12.5 kHz
77 452.8625 94 468.412512.5 kHz 12.5 kHz
78 456.1875 95 468.462512.5 kHz 12.5 kHz
79 456.2375 96 468.512512.5 kHz 12.5 kHz
80 456.2875 97 468.562512.5 kHz 12.5 kHz
81 456.3375 98 468.612512.5 kHz 12.5 kHz
82 456.4375 99 468.662512.5 kHz 12.5 kHz
RDX UHF Frequencies (Continued)
English
69
FREQUENCY AND CODE
CHARTS
RDU4100 – UHF DEFAULT FREQUENCIES CHART
RDX UHF 10CH Radios Default Frequencies – RDU4100
Channel Frequency # Frequency
(MHz) Code # Code Bandwidth
1 1 1464.5000 67.0 Hz 12.5 kHz
2 1 4464.5000 77.0 Hz 12.5 kHz
3 1 8464.5000 88.5 Hz 12.5 kHz
4 1 464.5000 29 179.9 Hz 12.5 kHz
5 1 0 -464.5000 12.5 kHz
6 2 1464.5500 67.0 Hz 12.5 kHz
7 2 6464.5500 82.5 Hz 12.5 kHz
8 WC 162.4000 10 67.0 Hz 25.0 kHz
9 2 464.5500 29 179.9 Hz 12.5 kHz
10 2 0 -464.5500 12.5 kHz
Note: WC = Weather Channel Frequency
English
70
FREQUENCY AND CODE
CHARTS
RDU4103 – UHF DEFAULT FREQUENCIES CHART
RDX UHF 10CH Radios Default Frequencies – RDU4103
Channel Frequency # Frequency
(MHz) Code # Code Bandwidth
1 1 1458.6625 67.0 Hz 12.5 kHz
2 2 1469.2625 67.0 Hz 12.5 kHz
3 1 2458.6625 71.9 Hz 12.5 kHz
4 2 2469.2625 71.9 Hz 12.5 kHz
5 1 3458.6625 74.4 Hz 12.5 kHz
6 2 3469.2625 74.4 Hz 12.5 kHz
7 1 4458.6625 77.0 Hz 12.5 kHz
8 2 4469.2625 77.0 Hz 12.5 kHz
9 1 5458.6625 79.7 Hz 12.5 kHz
10 2 5469.2625 79.7 Hz 12.5 kHz
Note: WC = Weather Channel Frequency
English
71
FREQUENCY AND CODE
CHARTS
CTCSS AND PL/DPL CODES
CTCSS Codes
CTCSS Hz Hz HzCTCSS CTCSS
1 67.0 14 107.2 27 167.9
2 71.9 15 28 173.8110.9
3 74.4 16 114.8 29 179.9
4 77.0 17 30 186.2118.8
5 79.7 18 123 31 192.8
6 82.5 19 127.3 32 203.5
7 85.4 20 131.8 33 210.7
8 88.5 21 136.5 34 218.1
9 91.5 22 141.3 35 225.7
10 23 146.2 36 233.694.8
11 97.4 24 151.4 37 241.8
12 100.0 25 156.7 38 250.3
13 103.5 26 162.2 122 (*) 69.3
Note: (*) New CTCSS code.
English
72
FREQUENCY AND CODE
CHARTS
PL/DPL Codes
DPL DPL DPLCode Code Code
39 23 55 116 71 243
40 25 56 125 72 244
41 26 57 131 73 245
42 31 58 132 74 251
43 32 59 134 75 261
44 43 60 143 76 263
45 47 61 152 77 265
46 51 62 155 78 271
47 54 63 156 79 306
48 65 64 162 80 311
49 71 65 165 81 315
50 72 66 172 82 331
51 73 67 174 83 343
52 74 68 205 84 346
53 114 69 223 85 351
54 70 226 86 364115
English
73
FREQUENCY AND CODE
CHARTS
87 365 565 754104 121
88 371 606 645105 123
89 411 106 124612 Customized PL
90 412 624107 125 Customized PL
91 413 627108 126 Customized PL
92 423 631109 127 Customized PL
93 431 632110 128 Customized PL
94 432 654111 129 Customized PL
95 445 662112 130 Inverted DPL 39
96 464 664113 131 Inverted DPL 40
97 465 703114 132 Inverted DPL 41
98 466 712115 133 Inverted DPL 42
99 503 723116 134 Inverted DPL 43
100 135506 731117 Inverted DPL 44
101 136516 732118 Inverted DPL 45
102 137532 734119 Inverted DPL 46
103 120 138546 743 Inverted DPL 47
PL/DPL Codes (Continued)
DPL DPL DPLCode Code Code
English
74
FREQUENCY AND CODE
CHARTS
139 Inverted DPL 48 Inverted DPL 65156 173 Inverted DPL 82
140 Inverted DPL 49 Inverted DPL 66157 174 Inverted DPL 83
141 Inverted DPL 50 Inverted DPL 67158 175 Inverted DPL 84
142 Inverted DPL 51 Inverted DPL 68159 176 Inverted DPL 85
143 Inverted DPL 52 Inverted DPL 69160 177 Inverted DPL 86
144 Inverted DPL 53 Inverted DPL 70161 178 Inverted DPL 87
145 Inverted DPL 54 Inverted DPL 71162 179 Inverted DPL 88
146 Inverted DPL 55 Inverted DPL 72163 180 Inverted DPL 89
147 Inverted DPL 56 Inverted DPL 73164 181 Inverted DPL 90
148 Inverted DPL 57 Inverted DPL 74165 182 Inverted DPL 91
149 Inverted DPL 58 Inverted DPL 75166 183 Inverted DPL 92
150 Inverted DPL 59 Inverted DPL 76167 184 Inverted DPL 93
151 Inverted DPL 60 Inverted DPL 77168 185 Inverted DPL 94
152 Inverted DPL 61 Inverted DPL 78169 186 Inverted DPL 95
153 Inverted DPL 62 Inverted DPL 79170 187 Inverted DPL 96
154 Inverted DPL 63 Inverted DPL 80171 188 Inverted DPL 97
155 Inverted DPL 64 Inverted DPL 81172 189 Inverted DPL 98
PL/DPL Codes (Continued)
DPL DPL DPLCode Code Code
English
75
FREQUENCY AND CODE
CHARTS
190 Inverted DPL 99 200 Inverted DPL 109 210 Inverted DPL 119
191 Inverted DPL 100 201 Inverted DPL 110 211 Inverted DPL 120
192 Inverted DPL 101 202 Inverted DPL 111 212 Inverted DPL 121
193 Inverted DPL 102 203 Inverted DPL 112 213 Inverted DPL 123
194 Inverted DPL 103 204 Inverted DPL 113 214 Customized DPL
195 Inverted DPL 104 205 Inverted DPL 114 215 Customized DPL
196 Inverted DPL 105 206 Inverted DPL 115 216 Customized DPL
197 Inverted DPL 106 207 Inverted DPL 116 217 Customized DPL
198 Inverted DPL 107 208 Inverted DPL 117 218 Customized DPL
199 Inverted DPL 108 209 Inverted DPL 118 219 Customized DPL
PL/DPL Codes (Continued)
DPL DPL DPLCode Code Code
English
76
MOTOROLA SOLUTIONS LIMITED
WARRANTY FOR THE UNITED
STATES AND CANADA
MOTOROLA SOLUTIONS
LIMITED WARRANTY FOR
THE UNITED STATES AND
CANADA
What Does this Warranty Cover?
Subject to the exclusions contained below, Motorola
Solutions, Inc. warrants its telephones, pagers, and
consumer and business two-way radios (excluding
commercial, government or industrial radios) that
operate via Family Radio Service or General Mobile
Radio Service, Motorola Solutions-branded or
certified accessories sold for use with these Products
(“Accessories”) and Motorola Solutions software
contained on CD-ROMs or other tangible media and
sold for use with these Products (“Software”) to be
free from defects in materials and workmanship under
normal consumer usage for the period(s) outlined
below.
This limited warranty is a consumer's exclusive
remedy, and applies as follows to new Motorola
Solutions Products, Accessories and Software
purchased by consumers in the United States, which
are accompanied by this written warranty.
Products and Accessories
Products Covered Length of Coverage
Products and
Accessories as defined
above, unless otherwise
provided for below.
One (1) year from the date
of purchase by the first
consumer purchaser of the
product unless otherwise
provided for below.
Decorative
Accessories and
Cases.
Decorative covers,
bezels, PhoneWrap™
covers and cases.
Limited lifetime warranty
for the lifetime of ownership
by the first consumer
purchaser of the product.
Business Two-way
Radio Accessories
One (1) year from the date
of purchase by the first
consumer purchaser of the
product.
Products and
Accessories that are
Repaired or Replaced.
The balance of the original
warranty or for ninety (90)
days from the date returned
to the consumer, whichever
is longer.
English
77
MOTOROLA SOLUTIONS LIMITED
WARRANTY FOR THE UNITED
STATES AND CANADA
Exclusions
Normal Wear and Tear. Periodic maintenance, repair
and replacement of parts due to normal wear and tear
are excluded from coverage.
Batteries. Only batteries whose fully charged
capacity falls below 80% of their rated capacity and
batteries that leak are covered by this limited
warranty.
Abuse & Misuse. Defects or damage that result from:
(a) improper operation, storage, misuse or abuse,
accident or neglect, such as physical damage (cracks,
scratches, etc.) to the surface of the product resulting
from misuse; (b) contact with liquid, water, rain,
extreme humidity or heavy perspiration, sand, dirt or
the like, extreme heat, or food; (c) use of the Products
or Accessories for commercial purposes or subjecting
the Product or Accessory to abnormal usage or
conditions; or (d) other acts which are not the fault of
Motorola Solutions, are excluded from coverage.
Use of Non-Motorola Solutions Products and
Accessories. Defects or damage that result from the
use of Non-Motorola Solutions branded or certified
Products, Accessories, Software or other peripheral
equipment are excluded from coverage.
Unauthorized Service or Modification. Defects or
damages resulting from service, testing, adjustment,
installation, maintenance, alteration, or modification in
any way by someone other than Motorola Solutions,
or its authorized service centers, are excluded from
coverage.
Altered Products. Products or Accessories with (a)
serial numbers or date tags that have been removed,
altered or obliterated; (b) broken seals or that show
evidence of tampering; (c) mismatched board serial
numbers; or (d) nonconforming or non-Motorola
Solutions housings, or parts, are excluded form
coverage.
Communication Services. Defects, damages, or the
failure of Products, Accessories or Software due to
any communication service or signal you may
subscribe to or use with the Products Accessories or
Software is excluded from coverage.
Software
Exclusions
Software Embodied in Physical Media. No warranty
is made that the software will meet your requirements
or will work in combination with any hardware or
software applications provided by third parties, that
the operation of the software products will be
Products Covered Length of Coverage
Software. Applies only
to physical defects in
the media that
embodies the copy of
the software (e.g. CD-
ROM, or floppy disk).
Ninety (90) days from the
date of purchase.
English
79
ACCESSORIES
ACCESSORIES
ANTENNA
AUDIO ACCESSORIES
BATTERY
CABLES
Part No. Description
RAN4031 UHF Whip Antenna 438–470
MHz
RAN4041 VHF Helical Antenna 146–174
MHz
RAN4033 UHF Stubby Antenna 438–470
MHz
Part No. Description
HKLN4601 Surveillance Earpiece BR
53815 Headset with Boom Microphone
BR
HMN4606 Remote Speaker Mic BR
53865 Headset with Swivel Boom Mic
HKLN4599 Earpiece with Inline Mic Swivel
HKLN4604 Earpiece BR
Part No. Description
RLN6308 High Capacity Li-Ion Battery
RLN6351 Standard Li-Ion Battery
Part No. Description
RLN6303 Radio to Radio Cloning Cable
RKN4155 CPS Programming Cable
Part No. Description
English
80
ACCESSORIES
CHARGERS
CARRY ACCESSORIES
SOFTWARE APPLICATIONS
POWER SUPPLIES AC PIN ADAPTERS
POWER SUPPLIES
Part No. Description
RLN6304 Rapid ACCY Charging Kit -
Americas (*)
RLN6309 Multi Unit Charger (MUC) Kit -
North America
RLN6175 Standard Drop-in Tray Charger
Part No. Description
RLN6307 Spring Action Belt Clip
RLN6302 Hard Leather Carry Case
Part No. Description
RVN5147 Customer Programming
Software (CPS)
Part No. Description
RLN6349 North America AC Pin Adapter
Part No. Description
RPN4054 Standard US Fixed Power
Supply
RPN4058 Standard Exchg AC pin Pwr
Supply
PMPN4005 Rapid Exchg AC pin Pwr Supply
English
81
ACCESSORIES
Note: Certain accessories may be or may not be
available at the time of purchase. For latest
information on accessories, contact your
Motorola Solutions point of purchase or visit:
www.motorolasolutions.com/RDX
(*) Americas Rapid Charging Kit includes
Power Supply, Drop-in Tray Charger, and AC
Pin adapters.
English
82
ACCESSORIES
NOTES
Français
(Canada)
2
TABLE DES MATIÈRES
Voyants du chargeur multi-unités . . . . . .30
Pour commencer . . . . . . . . . . . . . . . . . . . . .31
Mise sous tension et hors tension de la radio . .
31
Réglage du volume . . . . . . . . . . . . . . . . . . . .31
Sélection d'un canal . . . . . . . . . . . . . . . . . . .31
Conversation et contrôle . . . . . . . . . . . . . . . .31
Recevoir un appel . . . . . . . . . . . . . . . . . . . . .32
Portée de communication . . . . . . . . . . . . . . .32
Voyants de la radio . . . . . . . . . . . . . . . . . . . .34
Utilisation en mains libres/VOX . . . . . . . . . . .35
Avec accessoires VOX compatibles . . . .35
Mains libres sans accessoire (iVOX) . . .36
Réglage de la sensibilité VOX/iVOX . . . . . . .36
Activation du message vocal en mode utilisa-
teur . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Mode de tonalité de mise sous tension . . . . .36
Réinitialisation des paramètres par défaut . .36
Gain du microphone . . . . . . . . . . . . . . . . . . .37
Fonctions de programmation. . . . . . . . . . .39
Mode de configuration avancée . . . . . . . . . .39
Accès au mode de configuration avancée .
39
Entrée de valeurs de fréquences . . . . . . . . . 40
Lecture des valeurs CTCSS/DPL. . . . . . . . . 40
Lecture des valeurs de alayage automatique41
Canaux actifs . . . . . . . . . . . . . . . . . . . . . . . . 41
Programmation du canal météo (non applicable
au modèle EDR4103) . . . . . . . . . . . . . . . . 41
Enregistrement des paramètres. . . . . . . . . . 41
FAQ du mode de programmation. . . . . . . . . 42
Exemples de valeurs de programmation . . 43
Exemple de programmation d'une fré-
quence . . . . . . . . . . . . . . . . . . . . . . . . 43
Exemple de programmation d'un code . 44
Exemple de programmation du balayage
automatique . . . . . . . . . . . . . . . . . . . . 44
Exemple de programmation des canaux ac-
tifs . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Exemple de programmation des canaux de
météo (non valide pour le modèle
RMU4103) . . . . . . . . . . . . . . . . . . . . . 45
Autres fonctions de programmation . . . . . . . 46
Français
(Canada)
3
TABLE DES MATIÈRES
Balayage . . . . . . . . . . . . . . . . . . . . . . . . .46
Modification de la liste de balayage . . . .47
Suppression d'un canal nuisible . . . . . . .47
Logiciel de programmation client (CPS) . . . .48
Minuterie de délai d’attente. . . . . . . . . . .49
Sélection de l'alimentation . . . . . . . . . . .49
Tonalités d'appel. . . . . . . . . . . . . . . . . . .49
Brouillage . . . . . . . . . . . . . . . . . . . . . . . .49
Rafale en arrière . . . . . . . . . . . . . . . . . . .49
Texte-parole (modification des alias vocaux
prédéfinis). . . . . . . . . . . . . . . . . . . . . . . . . .50
Case à cocher Activation des messages vo-
caux prédéfinis par l'utilisateur . . . . . .50
Messages vocaux prédéfinis par l'utilisateur
50
Importer un fichier vocal . . . . . . . . . . .50
Écoute des messages vocaux définis par
l'utilisateur . . . . . . . . . . . . . . . . . . . . . .50
Fonction météo (non applicable au modèle
RDU4103). . . . . . . . . . . . . . . . . . . . . . . . . .51
Mode d'alerte météo . . . . . . . . . . . . . . . 52
Tableau des fréquences de canal météo 52
Il existe deux modes d'opération des alertes
météo :. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
EOM activé . . . . . . . . . . . . . . . . . . . . . . 53
Minuterie de nouvelle tonalité d'alerte . . 53
Filtre de type d'événement. . . . . . . . . . . . . . 54
Tous les événements. . . . . . . . . . . . . . . 54
Événement de test d'alarme . . . . . . . . . 54
Avertissement . . . . . . . . . . . . . . . . . . . . . . . 55
Veille . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Urgence . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Communiqué . . . . . . . . . . . . . . . . . . . . . . . 55
Filtre de code d'événement . . . . . . . . . . . . . 56
Blocage d'événement. . . . . . . . . . . . . . . . . . 56
Code d'événement . . . . . . . . . . . . . . . . . . . . 56
Tableau des événements critiques . . . . . . . 57
Filtre géographique . . . . . . . . . . . . . . . . . . . 59
État . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Français
(Canada)
4
TABLE DES MATIÈRES
Comté . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
FIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Clonage de radios . . . . . . . . . . . . . . . . . . . . .60
Clonage avec un chargeur multi-unités
(MUC) . . . . . . . . . . . . . . . . . . . . . . . . .60
Clonage de la radio au moyen du câble de
clonage de radio à radio (R2R) (acces-
soire en option) . . . . . . . . . . . . . . . . . .62
Clonage à partir du logiciel de programma-
tion client (CPS) . . . . . . . . . . . . . . . . .64
Dépannage . . . . . . . . . . . . . . . . . . . . . . . . . .66
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72
Utilisation et entretien. . . . . . . . . . . . . . . . .72
Graphiques des fréquences et des codes 74
RDX - Tableau des fréquences UHF. . . . . . .76
RDU4100 - Tableau des fréquences UHF par
défaut . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79
RDU4103 - Tableau des fréquences UHF par
défaut . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
Codes CTCSS et PL/DPL . . . . . . . . . . . . . . .81
Garantie limitée de Motorola Solutions pour
les États-Unis et le Canada . . . . . . . . . . . .86
Accessoires . . . . . . . . . . . . . . . . . . . . . . . . .90
Antenne . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Accessoires audio . . . . . . . . . . . . . . . . . . . . 90
Batterie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Câbles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Chargeurs . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Accessoires de transport . . . . . . . . . . . . . . . 91
Applications logicielles . . . . . . . . . . . . . . . . . 91
Adaptateurs c.a. à broches pour blocs d’alimen-
tation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Blocs d'alimentation . . . . . . . . . . . . . . . . . . . 92
Produktspezifikationen
| Marke: | Motorola |
| Kategorie: | Radio |
| Modell: | RDU4100 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Motorola RDU4100 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Radio Motorola
28 September 2024
25 September 2024
10 September 2024
31 August 2024
31 August 2024
31 August 2024
30 August 2024
7 August 2024
6 August 2024
6 August 2024
Bedienungsanleitung Radio
- Radio Clatronic
- Radio Tristar
- Radio Basetech
- Radio Sanyo
- Radio Exibel
- Radio Hama
- Radio Lexibook
- Radio Audio-Technica
- Radio Logitech
- Radio Manhattan
- Radio Manta
- Radio Medion
- Radio Nedis
- Radio NGS
- Radio Philips
- Radio SilverCrest
- Radio Sony
- Radio Sweex
- Radio Tevion
- Radio Panasonic
- Radio Brennenstuhl
- Radio Clas Ohlson
- Radio Cotech
- Radio Quigg
- Radio Makita
- Radio Adler
- Radio Camry
- Radio Bosch
- Radio Vonroc
- Radio AEG
- Radio First Austria
- Radio OK
- Radio TechniSat
- Radio Yamaha
- Radio Velleman
- Radio Maginon
- Radio Schwaiger
- Radio Technaxx
- Radio Alecto
- Radio BasicXL
- Radio Denver
- Radio ECG
- Radio EMOS
- Radio Gira
- Radio König
- Radio MarQuant
- Radio Renkforce
- Radio Technoline
- Radio Bush
- Radio Telefunken
- Radio Thomson
- Radio Trevi
- Radio Black And Decker
- Radio Ryobi
- Radio Blaupunkt
- Radio Grundig
- Radio Kenwood
- Radio Moulinex
- Radio Schneider
- Radio Sharp
- Radio Hilti
- Radio DeWalt
- Radio Einhell
- Radio Daewoo
- Radio Festool
- Radio Pyle
- Radio NABO
- Radio Nordmende
- Radio Salora
- Radio SEG
- Radio Telestar
- Radio Topcom
- Radio Tronic
- Radio Aiwa
- Radio AudioSonic
- Radio Auna
- Radio Coby
- Radio Bose
- Radio Caliber
- Radio Lenco
- Radio Denon
- Radio Mpman
- Radio Pioneer
- Radio JBL
- Radio JVC
- Radio Krüger And Matz
- Radio Muse
- Radio PEAQ
- Radio Sennheiser
- Radio Technics
- Radio TERRIS
- Radio Teufel
- Radio Olympia
- Radio Switel
- Radio Hikoki
- Radio Akai
- Radio Dual
- Radio Ferguson
- Radio GoGEN
- Radio Hitachi
- Radio Hyundai
- Radio MT Logic
- Radio Orava
- Radio Reflexion
- Radio Imperial
- Radio Metabo
- Radio Stanley
- Radio Kärcher
- Radio E-Bench
- Radio Easy Home
- Radio Garmin
- Radio AIC
- Radio Ricatech
- Radio Balance
- Radio Elta
- Radio Sencor
- Radio Icy Box
- Radio Bigben
- Radio OneConcept
- Radio Audio Pro
- Radio AudioAffairs
- Radio Boston Acoustics
- Radio Harman Kardon
- Radio Nikkei
- Radio Power Dynamics
- Radio Tangent
- Radio ICES
- Radio Sagem
- Radio Lowrance
- Radio Globaltronics
- Radio Xoro
- Radio Parrot
- Radio Zebra
- Radio EnVivo
- Radio Kathrein
- Radio Matsui
- Radio Icom
- Radio Midland
- Radio Binatone
- Radio Alpine
- Radio Logik
- Radio Be Cool
- Radio Proline
- Radio Delta
- Radio Hager
- Radio Omnitronic
- Radio MB Quart
- Radio Cambridge
- Radio Monacor
- Radio Rockford Fosgate
- Radio TEAC
- Radio Milwaukee
- Radio Narex
- Radio Roberts
- Radio Oricom
- Radio JUNG
- Radio DigiTech
- Radio Lexon
- Radio Pure
- Radio Sangean
- Radio Albrecht
- Radio Uniden
- Radio Clarion
- Radio ETON
- Radio Mac Audio
- Radio GPO
- Radio Sagemcom
- Radio Scott
- Radio Stabo
- Radio Yaesu
- Radio Audizio
- Radio JGC
- Radio Silva Schneider
- Radio Soundmaster
- Radio Audiovox
- Radio Navman
- Radio Sonoro
- Radio HQ
- Radio Cobra
- Radio Block
- Radio ION
- Radio Timex
- Radio DNT
- Radio Insignia
- Radio Craftsman
- Radio Powerplus
- Radio Busch-Jaeger
- Radio SPC
- Radio August
- Radio Majority
- Radio Roadstar
- Radio Tivoli
- Radio Crosley
- Radio Vitek
- Radio Woxter
- Radio Brionvega
- Radio NOXON
- Radio Scansonic
- Radio Sogo
- Radio Freecom
- Radio EasyMaxx
- Radio Ozito
- Radio PerfectPro
- Radio Boss
- Radio Intertechno
- Radio Telex
- Radio Tivoli Audio
- Radio Hertz
- Radio RCA
- Radio Kicker
- Radio Noveen
- Radio Swan
- Radio Jensen
- Radio Furrion
- Radio Sven
- Radio Harley-Davidson
- Radio JL Audio
- Radio La Crosse Technology
- Radio Oregon Scientific
- Radio Viper
- Radio Porter-Cable
- Radio Victrola
- Radio Alba
- Radio Ruark Audio
- Radio Berker
- Radio DAP Audio
- Radio Digitalbox
- Radio Duronic
- Radio Fusion
- Radio Futaba
- Radio Geneva
- Radio Go Green
- Radio GPX
- Radio Hitec
- Radio IHome
- Radio ILive
- Radio Iluv
- Radio Infinity
- Radio Intek
- Radio IRC
- Radio Iriver
- Radio Karcher Audio
- Radio Konig Electronic
- Radio Kruger Matz
- Radio Laser
- Radio Monitor Audio
- Radio Mtx Audio
- Radio Multiplex
- Radio Naxa
- Radio Numan
- Radio Peha
- Radio Pinell
- Radio Revo
- Radio Roth
- Radio Ruarkaudio
- Radio Sailor
- Radio Sanwa
- Radio Sirius
- Radio Soundstream
- Radio Steren
- Radio Sunstech
- Radio Tecsun
- Radio Terratec
- Radio Tesco
- Radio Tiny Audio
- Radio AMX
- Radio Universum
- Radio View Quest
- Radio Voxx
- Radio Wolfgang
- Radio Zolid
- Radio Acoustic Energy
- Radio TFA Dostmann
- Radio Vimar
- Radio Equity
- Radio Clint
- Radio Kunft
- Radio PAC
- Radio Nevir
- Radio Aluratek
- Radio Atlantis Land
- Radio CRUX
- Radio Blonder Tongue
- Radio Lenoxx
- Radio H-Tronic
- Radio Argon
- Radio Brigmton
- Radio Wet Sounds
- Radio Linn
- Radio Roswell
- Radio EKO
- Radio Audac
- Radio DreamGEAR
- Radio Ices Electronics
- Radio QFX
- Radio Dcybel
- Radio Artsound
- Radio Bigben Interactive
- Radio SSV Works
- Radio R-MUSIC
- Radio SiriusXM
- Radio Majestic
- Radio AmpliVox
- Radio Memphis Audio
- Radio Aquatic AV
- Radio Eissound
- Radio NUVO
- Radio Xhdata
- Radio Microlab
- Radio GBS Elettronica
- Radio Klein Tools
- Radio Gewiss
- Radio VR-Radio
- Radio Lutron
- Radio Axxess
- Radio Acoustic Solutions
- Radio Weather X
- Radio BLUEPALM
- Radio SW-Stahl
- Radio Audisse
- Radio Whistler
- Radio Xact
- Radio GME
- Radio SACK It
- Radio Elbe
- Radio Sang
- Radio Retekess
- Radio Wintal
- Radio Ranger
- Radio Data-Tronix
- Radio Aconatic
- Radio Mebby
Neueste Bedienungsanleitung für -Kategorien-
4 Dezember 2024
3 Dezember 2024
1 Dezember 2024
1 Dezember 2024
1 Dezember 2024
1 Dezember 2024
1 Dezember 2024
30 November 2024
30 November 2024
16 Oktober 2024