Motorola Polaroid Insta-Share Printer Bedienungsanleitung

Motorola Nicht kategorisiert Polaroid Insta-Share Printer

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Motorola Polaroid Insta-Share Printer (73 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 63 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/73
Let's get started
We'll guide you through attaching and using your Polaroid Insta-Share Printer Moto Mod™.
In this guide:
• “Attach and remove your Moto Mod”
• “Charge your Insta-Share Printer”
• “Load paper into your Insta-Share Printer”
• “Take a photo”
• “Print your photo”
• “Print a saved photo”
• “Print a photo from another app”
• “Peel and stick your photo”
• “Want more?”
Attach and remove your Moto Mod
Align the sides of your phone with the sides of the Moto Mod until they snap together.
When connected, you will feel a vibration, see a message on your screen and hear
asound.
Note: make sure your phone's camera lens aligns with the hole in the Insta-Share Printer
and the connectors are clean and dry. Also, remove your phone case if you use one.
To remove your Insta-Share Printer, lift up from the bottom pick out area.
Caution: do not remove your Insta-Share Printer by pushing the phone's camera lens,
asthat could damage your phone.
INSTA-SHARE
PRINTER
1
MD100I
Charge your Insta-Share Printer
Note: the fastest way to charge your Moto Mod is to plug the charger into your Insta-
Share Printer.
To charge, connect your Insta-Share Printer to a power outlet with a USB-C cable.
Alternatively, charge your device by attaching it to your phone and charging your phone.
Note: fully charge your Moto Mod using the charger that came with your phone.
Usingother chargers with a USB-C connector is not recommended and can slow
chargespeed. Avoid incompatible USB-B (micro USB) chargers and uncertified
adaptersand cables, asthey may damage your device.
Charge levels
Press the battery check button to check the charge level. The LEDs indicate the charge level.
LEDs Charge %
4 75 to 100
3 50 to 74
2 25 to 49
1 0 to 24
Note: your Insta-Share Printer must be charged at least 20% (or 2 LED lights) in order to print.
Battery check
button
Load paper into your Insta-Share Printer
You'll need to remove the back cover to insert printer paper.
Remove the back cover
1 Press down on the cover and slide it partially o.
2 Lift o the cover.
Insert the paper
Note: Use only Polaroid ZINKÂŽ Zero-InkÂŽ Printing Technology 2" x 3" paper in your Insta-
Share Printer or else it may not print correctly.
1 Insert the blue piece of paper with the barcode side facing down.
Note: the blue piece of paper cleans and sets up the printer. You must use the blue
sheet of paper each time you open a new pack of paper.that came with that pack
2 Insert the white paper with the ZINK logo facing down.
Note: put all ten sheets into the printer, but no more than one pack at a time.
BecauseZINK paper is heat-activated, protect it from heat and moisture by leaving
thepaper in the foil pack until you're ready to load it into your printer
.
1
12

Produktspezifikationen

Marke: Motorola
Kategorie: Nicht kategorisiert
Modell: Polaroid Insta-Share Printer

Brauchst du Hilfe?

Wenn Sie Hilfe mit Motorola Polaroid Insta-Share Printer benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Motorola

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂźr -Kategorien-