Motorola MTIBM042611 Bedienungsanleitung

Motorola Sicherheitskamera MTIBM042611

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Motorola MTIBM042611 (3 Seiten) in der Kategorie Sicherheitskamera. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/3

•It is recommended to install the network connector

cap for exterior installations

•The DC12V power supply is not necessary when the

camera is connected directly to a PoE device.

Connecting the network cable

3. Product Overview

CAMERA

QUICK GUIDE

3 PLASTIC SCREW PLUGS

NETWORK CONNECTION

3 Tapping screws

PA 4X25

1Fixing ring 3Network cable

2Mounting base 4Power cable

IP BULLET CAMERA

IP BULLET VARIFOCAL CAMERA

CAMERA

QUICK GUIDE 3 Tapping screws PA 4X25

1 PWM 3X5MACHINE SCREW

3 PLASTIC

SCREW PLUGS

DRILLING

TEMPLATE

RUBBER PLUG

1. Remove the connector cap by unscrewing it.

2. Run a network cable through the two caps parts and

install RJ45 connector to cable and connect both

cables together .

3. Screw together the cap parts and then screw cap to

the camera network connector cable .

4. Installation

•

Please make sure that the wall or ceiling is strong

enough to withstand 3 times the weight of the camera.

Please install and use the camera in the dry

environment.

1. Drill the screw holes and the cable hole on the mounting

surface using the available drill template.

2. Install rubber plug for exterior installations.

3. Route the cables through the cable hole and screw

in place base to mounting surface.

RUBBER PLUG

MOUNTING BASE

IP camerabullet

Quick Guide

IP varifocal camerabullet

Quick Guide

•Please, read carefully these instructions before

operating your camera and save this as reference.

•All examples and images used in this guide are only

for reference.

•The content of this guide is subject to changes

without previous notice.

1. Precautions

•If the product does not work properly, please contact

your dealer or the nearest service center. Never

attempt to disassemble the camera yourself. Your

warranty will be voided if any problems are caused

by unauthorized repair or maintenance.

•

Handle with care and prevent dropping the camera.

When the product is mounted on a wall or ceiling,

ensure that the device is properly firmly fixed.

•Prevent touching the lens of the camera.

•

If cleaning is necessary, please use a clean cloth to

wipe it gently. If the device will not be used for a long

time, please cover the lens cap to protect the device

from dust.

Prevent aiming the camera directly to the sun or to

very bright environments.

•Do not place the camera in extrem hot or coldely

environments (operating temperature is -20˚C~50˚C),

dusty or damp locations.

• Para evitar exceso de calentamiento To avoid increase

in heat of product, good ventilation is required.

2. Contents

NOTE: IF YOUR CAMERA IS NOT VARIFOCAL OR IS

MOTORIZED, PLEASE SKIP STEPS 5, 6, 7.

4. Before adjusting the bracket, preview the image of the

of the camera on a monitor and then loosen the fixed ring

or screws to adjust the tikt or pan angle of the camera.

5. Loosen the the top screw on the sun protector and

slide back the protector.

6. Focus and zoom adjustment. Remove the lens cover

by unscrewing it and then adjust the focus and zoom by

turning the screws until the best image is achieved.

Tighten these two screws and replace back the lens cover.

7. Slide forward he solar protector and tighten screw.

Fixing ring

Sun protector

Lens cover

Zoom

Focus

2. The system will automatically detect all IP cameras

connected in your network.

3. Select the camera to add and click on the Add

button.

Input the IP address or domain name (click in the

IP address column to pop up the domain name input

window, input the domain name of the camera in the

window and then click “OK” button), port, username

and password of the camera and then select the

protocol. Click “Test” to test the eectiveness of the

input information and then click “Add” button (you

can input the camera’s information or above such as

IP address, username and password before clicking

“Add” button).

5. Connecting your camera

•

1. In your DVR/NVR device click on Add Camera.

You can click on to edit the camera’s IP address,

username and password. The factory default username

is and the password for the cameras is .admin 123456

You can also Add a camera to your system by doing

it manually.

Motorola Limited Warranty

This Motorola brand Product is produced under license by MDX

ELECTRONICS, LLC. Subject to the exclusions below, MDX

ELECTRONICS warrants that this Motorola brand product

("Product") will remain free from defects in materials and

workmanship under normal consumer usage for year . This 2 s

Warranty is your exclusive warranty. This Warranty extends only

to the ﬁrst consumer purchaser and is not transferable. MDX

ELECTRONICS at no charge repair or replace any Product will

that qualiﬁes under this Warranty. We may use functionally

equivalent reconditioned, refurbished, or new Products.

MOTOROLA and MDX ELECTRONICS are not responsible for

defects or damage that result from: (a) improper operation,

storage, misuse, abuse, maintenance, alteration, accident or

neglect, such as physical damage (cracks, scratches, etc.) to the

surface of the product or lens resulting from misuse; (b)

subjecting the Product or Accessory to abnormal usage or

conditions; (c) service provider alteration of the Product

including alteration of the Product’s ﬁrmware; or (d) other acts

which are not he fault of MOTOROLA or MDX ELECTRONICS, t

are excluded from coverage.

Any implied warranties, including without limitation the implied

warranties of merchantability and ﬁtness for a particular

purpose, shall be limited to the duration of this limited warranty.

This warranty is provided in lieu of all other warranties, express

or implied. In no event shall MOTOROLA or MDX ELECTRONICS

be liable, whether in contract or tort (including negligence) for

damages in excess of the purchase price of the product, or for

any indirect, incidental, special or consequential damages of any

kind, or loss of revenue or proﬁts, loss of business, loss of

information or other ﬁnancial loss arising out in connection of or

with the ability or inability to use the product, to the full extent

these damages may be disclaimed by law.

Some jurisdictions do not allow the limitation or exclusion of

incidental or consequential damages, or limitation on the length

of an implied warranty, so the above limitations or exclusions

may not apply to you. This Warranty gives you speciﬁc legal

rights, and you may also have other rights that vary from one

jurisdiction to another.

To obtain support or need of information, doubts or questions,

please contact us at:

Tel: 01 800 801 6398 (México)

Tel: +011 52 55 9688-8814 (México, Latin America and Caribe)

WhatsApp: +52 155 7657 5586 (México, Latin America, Caribe)

Skype: soporte.motorolasecurity

Email: soporte@mdx-motorolasecurity.com

9:00AM - 5:00PM CST (Mon-Fri)

Manufactured, distributed or sold by MDX ELECTRONICS, LLC,

official licensee for this product. MOTOROLA and the Stylized M

Logo are trademarks or registered trademarks of Motorola

Trademark Holdings, LLC. and are used under license. All other

trademarks are the property of their respective owners.

Produktspezifikationen

Marke:	Motorola
Kategorie:	Sicherheitskamera
Modell:	MTIBM042611
Eingebautes Mikrofon:	Nein
Unterstützte mobile Betriebssysteme:	Android, iOS
Unterstützte Audioformate:	Nicht unterstützt
Upgradefähige Firmware:	Ja
WLAN:	Nein
Bluetooth:	Nein
Gewicht:	610 g
Produktfarbe:	Black, White
Internationale Schutzart (IP-Code):	IP66
Übertragungstechnik:	Kabelgebunden
Energiequelle:	DC, PoE
Befestigungstyp:	Wand
Gleichstrom-Anschluss (DC):	Ja
Betriebstemperatur:	-20 - 50 °C
Relative Luftfeuchtigkeit in Betrieb:	0 - 95 %
Netzstandard:	IEEE 802.1x, IEEE 802.3af
Unterstützte Netzwerkprotokolle:	TCP/IP UDP DHCP NTP RTSP PPPoE DDNS SMTP FTP, HTTPS, SNMP, 802.1X, QoS
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	1
Typ:	IP-Sicherheitskamera
Stromverbrauch (max.):	6 W
Gehäusematerial:	Metall
Zahl der Benutzer:	3 Benutzer
Unterstützte Video-Modi:	720p, 1080p
Unterstützte Grafik-Auflösungen:	480 x 240,1280 x 720 (HD 720),1920 x 1080 (HD 1080)
Unterstützte Videoformate:	H.264, H.265
Geräuschunterdrückung:	Ja
Größe des Bildsensors:	1/2.7 "
Schwenkbereich:	0 - 360 °
Neigungswinkelbereich:	0 - 80 °
Formfaktor:	Bullet
Webbrowser:	Ja
Länge (mm):	221 mm
Durchmesser:	87 mm
Integrierter Kartenleser:	Nein
Videokompressionsformate:	H.264, H.265
Fokus:	Manuell
Maximale Auflösung:	1920 x 1080 Pixel
Ethernet Schnittstellen Typ:	Schnelles Ethernet
IP-Adressen Filter:	Ja
Reset-Knopf:	Nein
DC-Ausgang Volt:	12
Passwortschutz:	Ja
Brennweitenbereich:	2.8 - 12 mm
Bis zu 30 Frames pro Sekunde:	30 fps
Megapixel insgesamt:	2 MP
Anzahl der Kameras:	1
Tag/ Nachtmodus:	Ja
Mindestbeleuchtung:	0 Lux
Eingebaute HDD:	Nein
Nachtsichtdistanz:	40 m
Videostreaming:	Ja
Sensor-Typ:	CMOS
Verschlusstyp:	Elektronisch
Bildqualitätsanpassung:	Brightness, Contrast, DNR, Saturation, Sharpness
Nachtsicht:	Ja
Wide Dynamic Range (WDR):	Ja
Drehungswinkel:	360 °
Auto-Flip:	Ja
Kamera Verschlusszeit:	1/25 - 1/100000 s
Anzahl der Sensoren:	1
Vollbildverfahren:	Ja
Anzahl der effektiven Pixel (H x V):	1920 x 1080 Pixel
Maximale Blendenzahl:	1.4
Thermische Bildrate (NTSC):	60 Hz
Thermische Bildrate (PAL):	50 Hz
Videointelligenz-Analyse:	Ja
Geräuschunterdrückungstechnologie:	3D-Rauschunterdrückung
Flip & Spiegel:	Ja
Datenschutz-Maskierung:	Ja
Bitratenkontrolle:	Constant Bit Rate (CBR)/Variable Bit Rate (VBR)
Übertragungsgeschwindigkeit:	256 Kbps - 5 Mbps
Gegenlichtkompensation:	Ja
Highlight-Kompensation (HLC):	Ja
Digital Wide Dynamic Range (DWDR):	Ja
Region of Interest-(ROI)-Kodierung:	Ja
Smart-IR:	Ja
Video-Bewegungsmelder:	Ja
Herzschlag:	Ja
Spiegel:	Ja
Digitales Wasserzeichen:	Ja
Intelligent Video Surveillance-(IVS)-System-Eigenschaften:	Abandoned object, Crossing line, Intrusion
Managementsoftware:	MVMS AI, MVMS ENTERPRISE
Verhaltensanalyse:	Intrusion detection, Line crossing detection, Object removal detection
Ethernet/LAN:	Ja
Unterstützte Positionierung:	Innen & Außen
Wetterfestigkeit:	Ja