Motorola HS830 Bedienungsanleitung

Motorola Ohrhörer HS830

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Motorola HS830 (3 Seiten) in der Kategorie Ohrhörer. Dieser Bedienungsanleitung war für 56 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/3

Before using this product, read the Important Safety and Legal

Information pamphlet and follow its instructions.

Take a moment before you get started to

familiarize yourself with your new

HS830 Wireless Module.

BEFORE YOU

BEGIN

MOTOROLA and the Stylized M Logo are registered in the US

Patent & Trademark Office. The Bluetooth trademarks are

owned by their proprietor and used by Motorola, Inc. under

license. All other product or service names are the property of

their respective owners.

The use of wireless devices and their accessories may be

prohibited or restricted in certain areas. Always obey the laws

and regulations on the use of these products.

Motorola, Inc.

Consumer Advocacy Office

1307 East Algonquin Road

Schaumburg, IL 60196 USA

www.hellomoto.com

1-877-MOTOBLU

1-800-331-6456 (United States)

1-888-390-6456 (TTY/TDD United States for

hearing impaired)

1-800-461-4575 (Canada)

Part Number: 6809495A49-O

HS830

Bluetooth®

Wireless Module

TROUBLESHOOTING

My phone doesn't find my wireless module.

Make sure the indicator light on your wireless

module is on and steady when your phone is

searching for devices (see step 3).

My wireless module worked before but now

it's not working.

Make sure your phone is on and the Bluetooth

feature is turned on in your phone (see step 2).

If the Bluetooth feature was turned off or was

turned on only temporarily, you may need to

restart the Bluetooth feature (see step 2) and

pair your phone and wireless module again (see

step 3).

Support.

If you need more help, contact us at

1- 877-MOTOBLU.

FOR DETAILS ABOUT YOUR HANDSFREE

DEVICE

See the user’s guide or visit us at

www.hellomoto.com/bluetooth and click

Support.

Get Connected in

5 Quick Steps

1 - CHARGE

2 - START

BLUETOOTH

FEATURE

3 - PAIR

4 - CONNECT 

TO NECK 

STRAP

5 - TEST AND

USE

CHARGE

Plug the Motorola charger into the end of

the module with the release tab facing

down.

The indicator light turns on when the battery

is charging. It may take up to 1 minute for

the indicator light to turn on. When the

module's battery is fully charged (about 2

hours), the indicator light turns off.

Disconnect the charger.

Note: Module is not functional while charging.

Your Module's Battery

START BLUETOOTH

FEATURE

Your Phone

Press (Menu) > Settings > Connection >

Bluetooth Link > Setup.

Scroll to Power.

Select Change.

Scroll to On.

Press to turn on the Bluetooth Select

feature. The Bluetooth feature remains on

until you turn the feature off.

Note: These steps are for most Motorola phones. For other

phones, see your phone's user's guide.

Your phone's Bluetooth feature is off by default.

To use your wireless module, you must turn on

the Bluetooth feature in your phone.

For most Motorola phones:

PAIR

Your Module

Before you can use your wireless module, you

must pair (link) it with your phone.

Step A - PUT THE MODULE IN PAIRING

MODE

Ensure the wireless module is turned off

(indicator light not blinking).

Press and hold the Call button for 6 E

seconds. The indicator light will initially flash,

but continue to hold down the button until

the indicator light is steadily lit.

If the indicator light is flashing or not steadily

lit when releasing the button, repeat both

steps 1 and 2 on this page.

PAIR CONTINUED

Your Phone

Step B - SET YOUR PHONE TO LOOK FOR

YOUR MODULE

For most Motorola phones:

On your Motorola phone, press )(Menu >

Settings > Connection > Bluetooth Link >

Handsfree > Look for Devices.

The phone lists Bluetooth devices it finds.

Select Motorola HS830.

Select or to pair your module with OK Yes

your phone.

Enter the passkey: 0000

Select .OK

When your wireless module successfully

pairs with your phone, the indicator light

changes from steadily lit to flashing.

Note: These steps are for most Motorola phones. For other

phones, see your phone's user's guide.

CONNECT

Your Module to Neck Strap

Insert the 2.5mm plug from the

neck strap into the module jack on the

bottom of the wireless module.

Push the wireless module back

into the neck strap holder.

Insert the two tabs on the neck

strap holder into the slots on the

top of the wireless module.

Place the neck strap around your

neck and insert the earbud in your

ear.

TEST AND USE

Your phone and wireless module are now

paired and ready to make and receive calls.

To make a call:

Place the neck strap on and the earbud in

your ear.

On your phone, dial the number you want

to call and press the key.SEND

If your phone and module are successfully

paired, you will hear ringing on the earbud.

After you have successfully paired your

phone and module, you don't need to

repeat these steps. For daily use, ensure

that your module is turned ON and that

your phone's Bluetooth feature is ON.

To save battery power, turn OFF the

module when you don't use it for an

extended time.

Release Tab Down

Call Button

Volume

Button

Charging Port

Volume

Down

Button

Indicator

Light

Module

Jack

Indicator

Light

Plug

Module

Jack

Neck

Strap

Holder

Slots

Volume

Button

Volume

Down

Button

Indicator

Light

Call Button

IMPORTANT:

Be sure to first follow the

Quick Start Guide

on the reverse side to

complete initial setup of

your HS830.

IMPORTANT:

Be sure to first follow the

Quick Start Guide

on the reverse side to

complete initial setup of

your HS830.

HS830

Bluetooth®

Wireless Module

TURNING ON

AND OFF

To turn on the wireless module , press and

hold the button on your module until Call E

the indicator light begins flashing. The

indicator light blinks when the power is on.

To turn off the wireless module, press and

hold the button on your module for 5 Call E

seconds. The indicator light will flash rapidly

and then stop flashing.

When increasing (or decreasing) volume, a

single audio tone is heard when reaching

maximum (or minimum) level.

ADJUSTING VOLUME

To adjust the volume on your wireless

module, press the or Volume Up Volume

Down button until you reach the desired

volume level.

MAKING CALLS

Note: Your HS830 supports both Handsfree and Headset

Profiles. Accessing call functions depends upon which

profile your phone supports. See your phone's user's guide

for more information.

Function  Action

Make a voice dial callTap the buttonCall

and speak the  

name after the tone

Receive a call  Tap the button Call



End a call  Tap the button Call

Reject a call  Press and hold the

 button until youCall

hear a beep

Redial last call  Press and hold the

 button until youCall

hear a beep

Mute a call  Press and hold both 

 buttons Volume

until you hear a beep.

Unmute a call  Press either Volume

button

Transfer a call from theTap the buttonCall

phone to the module

MAKING CALLS CONTINUED



Function  Action

Answer a second Press and hold the

incoming call  button (placesCall

first call on hold)

Toggle between twoPress and hold

active calls  the buttonCall

Join a 3-way call  Press and hold

(Note: Feature is phone/both Volume

network dependent.)buttons

Put an active call onPress and hold the

hold or resume a callbutton until youCall

on holdhear a beep



INDICATOR LIGHTS

The indicator light provides information about

your wireless module status.

With the Charger Plugged In

Indicator Light  Module Status

On (steady)  Charging

OffCharging complete

With No Charger Plugged In

Indicator Light  Module Status

OffPower off

On (steady)  Pairing mode

10 rapid flashes  Pairing successful

Slow pulse  Connected  

(on a call)

Quick flash   Standby

(not on call)

 

Note: After 5 minutes of inactivity, the indicator light stops

flashing to conserve power, but the headset remains in

standby mode.

AUDIO TONES

Audio Tone  Module Status

Single high tone whenVolume at minimum

pressing volume buttonor maximum

Five rapid high tonesLow battery

repeated every 60 sec.

No audio indications;Out of range

deteriorating quality

Series of 4 tones  Call active

(low to high)

Ring tone  Incoming call

Single high tone  Pairing confirmation

Single low tone  Voice activation

Dual high/low toneVoice tag not

recognized

Single high tone  End call

Series of 4 tones  Audio link closed

(high to low)  (headset mode)

Call ended

(handsfree mode)

AUDIO TONES CONTINUED

Audio Tone  Module Status

Fast high/low  No   

tone every  network/service

5 seconds (max.

& min. volume

confirm beep)

No tonePower off

The wireless module sounds an audible alert

so that you do not miss an incoming call even

if your phone is in a bag or briefcase. The

audible alert can be turned on or off by

pressing and holding both buttons for Volume

3 seconds.

Note: Disabling the audible alert does not affect the

phone or earbud operation. Alerts will still be heard in the

earbud speaker if the phone is set to other than silent

mode.

OTHER WIRELESS MODULE

APPLICATIONS

The wireless module can also be used as a

handsfree device on a helmet. The Motorola

SYN0997 Universal Helmet Adapter mounts

to almost any helmet - motorcycle/scooter,

skiing, snowboarding. The wireless module

slides into the helmet adapter creating a

handsfree accessory for your helmet.

Two wireless modules can also be configured

for full-duplex voice communication with each

other. For example, a motorcycle driver may

communicate wirelessly with a rider sitting

behind.

For details on these applications, see the

HS830 Helmet Adapter User's Guide.

Produktspezifikationen

Marke:	Motorola
Kategorie:	Ohrhörer
Modell:	HS830
Bluetooth:	Ja
Gewicht:	16 g
Produkttyp:	Kopfhörer
Headset-Typ:	Monophon
Übertragungstechnik:	Kabellos
Gesprächszeit:	6 h
Bereitschaftszeit:	120 h
Abmessungen (BxTxH):	51 x 25 x 10 mm
Kompatibilität:	Telefon