MOTA G1 Bedienungsanleitung
MOTA
Smartwatches
G1
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für MOTA G1 (2 Seiten) in der Kategorie Smartwatches. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/2
CHARGING
MOTA® SmartWatch comes with a built-in
rechargeable battery. Before the rst use,
please charge your SmartWatch fully for
approximately 2 hours.
How to Charge
To begin charging, insert the charging cable
into the SmartWatch and connect the other
end to your computer’s USB port or other USB
power source (such as USB wall adapter).
The charging port is a 3.5 mm standard
two-in-one, which can be used for charging,
or using a headphone to listen to audio from
the SmartWatch.
Charging Time
Charging time is approximately 2 hours.
When your SmartWatch is nished
charging, the battery symbol on the screen
will indicate full.
Charge Indication
When charging, the number of power grids
displayed on the Screen will increase until
SmartWatch is fully charged.
Stand-by Time
The stand-by time is approximately 72 hours.
Note: Vibrating and screen display usage
will aect the stand-by time.
Low Battery Notication
When the battery level is low, “Low
Battery” will be displayed on the screen.
POWER
Power ON: Press and hold the power button
(A) for 3 seconds, until “Power on” is
displayed.
Power OFF: Press and hold the power button
(A) for 3 seconds, until “Power o” is
displayed.
SET TIME
With SmartWatch in power on status, press
button (B) for 3 seconds in order to set
the time. The hour digits will begin ashing.
Continue pressing (A) until the desired hour
is shown. Press (B) to advance to set the
minute.
Continue pressing (A) until the desired
minute is shown.
Presss button (B) to save and exit time
setting.
T nha k you f yor our purchas OTe of M A®
SmartWatch. For any questions, y may reaou ch
MOTA® support via www.mota.com/support/
FUNCTION OVERVIEW
CHARGING
MOTA® SmartWatch comes with a built-in
rechargeable battery. Before the rst use,
please charge your SmartWatch fully for
approximately 2 hours.
How to Charge
To begin charging, insert the charging cable
into the SmartWatch and connect the other
end to your computer’s USB port or other USB
power source (such as USB wall adapter).
The charging port is a 3.5 mm standard
two-in-one, which can be used for charging,
or using a headphone to listen to audio from
the SmartWatch.
Charging Time
Charging time is approximately 2 hours.
When your SmartWatch is nished
charging, the battery symbol on the screen
will indicate full.
Charge Indication
When charging, the number of power grids
displayed on the Screen will increase until
SmartWatch is fully charged.
Stand-by Time
The stand-by time is approximately 72 hours.
Note: Vibrating and screen display usage
will aect the stand-by time.
Low Battery Notication
When the battery level is low, “Low
Battery” will be displayed on the screen.
POWER
Power ON: Press and hold the power button
(A) for 3 seconds, until “Power on” is
displayed.
Power OFF: Press and hold the power button
(A) for 3 seconds, until “Power o” is
displayed.
SET TIME
With SmartWatch in power on status, press
button (B) for 3 seconds in order to set
the time. The hour digits will begin ashing.
Continue pressing (A) until the desired hour
is shown. Press (B) to advance to set the
minute.
Continue pressing (A) until the desired
minute is shown.
Press button (B) to save and exit time
setting.
T nha k you f yor our purchas OTe of M A®
SmartWatch. For any questions, y may reaou ch
MOTA® support via www.mota.com/support/
FUNCTION OVERVIEW
PAIR
Keep MOTA SmartWatch within 5ft of your
phone. Please ensure the SmartWatch is OFF.
Press and continue to hold the power button
(A) for 10 seconds until SmartWatch turns ON
and “Pairing” is shown on screen.
Access the Bluetooth menu on your phone to
search for devices.
Choose “Bracelet.”
If prompted for password, enter “0000”.
Complete the pairing process per your
phone’s instructions.
SmartWatch will then show the current time
and a headphone icon will be displayed to
indicate a successful connection.
Press and hold buttons (A) and (B) for 3
seconds to sync your contacts.
INCOMING CALL
When you receive a phone call, the
SmartWatch will vibrate and display the
caller’s name or number.
When receiving a call, press (A) or (B) to
answer the call. “Active Call” will be
displayed, you are now connected.
To reject/hang-up the incoming call, press
the power button (A) for 2 seconds. “Hang
up” will be displayed.
During conversation, press (B) to increase
volume, press (A) to decrease volume.
Double click (A) / (B) to re-dial the last
person you called.
RE-PAIR
When you restart your SmartWatch, you may
need to re-pair it to your phone. Please follow
PAIR instructions noted previously.
RESET
To un-pair your SmartWatch, please refer to
your phone’s instructions for un-pairing from
a Bluetooth device.
SAFETY GUIDELINES
Do not put the SmartWatch into liquid or
expose to high humidity environments.
Do not wash the SmartWatch.
Do not expose the SmartWatch to extreme
temperature (high or low).
Do not attempt to open the SmartWatch,
as this is not safe and may void your
warranty.
SPECIFICATIONS
• Bluetooth Version: 2.1
• Battery Type: Lithium Polymer
• Frequency: 2.4 Ghz
• Voltage: 3.6V - 4.2V
• Current: 45 mA
• Talk Time: 2 - 3 hours
• Stand by Time: 72 hours
For Support and Warranty Information,
please visit:
www.mota.com/support/
© Copyright 2014 MOTA®. All rights reserved. MOTA® is a
registered trademark of UNorth® LLC. The Bluetooth
word mark, gure mark, combination mark, and
Bluetooth Smart and Bluetooth Smart Ready marks are
all trademarks that are owned by the Bluetooth SIG.
PAIR
Keep MOTA SmartWatch within 5ft of your
phone. Please ensure the SmartWatch is OFF.
Press and continue to hold the power button
(A) for 10 seconds until SmartWatch turns ON
and “Pairing” is shown on screen.
Access the Bluetooth menu on your phone to
search for devices.
Choose “Bracelet.”
If prompted for password, enter “0000”.
Complete the pairing process per your
phone’s instructions.
SmartWatch will then show the current time
and a headphone icon will be displayed to
indicate a successful connection.
Press and hold buttons (A) and (B) for 3
seconds to sync your contacts.
INCOMING CALL
When you receive a phone call, the
SmartWatch will vibrate and display the
caller’s name or number.
When receiving a call, press (A) or (B) to
answer the call. “Active Call” will be
displayed, you are now connected.
To reject/hang-up the incoming call, press
the power button (A) for 2 seconds. “Hang
up” will be displayed.
During conversation, press (B) to increase
volume, press (A) to decrease volume.
Double click (A) / (B) to re-dial the last
person you called.
RE-PAIR
When you restart your SmartWatch, you may
need to re-pair it to your phone. Please follow
PAIR instructions noted previously.
RESET
To un-pair your SmartWatch, please refer to
your phone’s instructions for un-pairing from
a Bluetooth device.
SAFETY GUIDELINES
Do not put the SmartWatch into liquid or
expose to high humidity environments.
Do not wash the SmartWatch.
Do not expose the SmartWatch to extreme
temperature (high or low).
Do not attempt to open the SmartWatch,
as this is not safe and may void your
warranty.
SPECIFICATIONS
• Bluetooth Version: 2.1
• Battery Type: Lithium Polymer
• Frequency: 2.4 Ghz
• Voltage: 3.6V - 4.2V
• Current: 45 mA
• Talk Time: 2 - 3 hours
• Stand by Time: 72 hours
For Support and Warranty Information,
please visit:
www.mota.com/support/
© Copyright 2014 MOTA®. All rights reserved. MOTA® is a
registered trademark of UNorth® LLC. The Bluetooth
word mark, gure mark, combination mark, and
Bluetooth Smart and Bluetooth Smart Ready marks are
all trademarks that are owned by the Bluetooth SIG.
Produktspezifikationen
Marke: | MOTA |
Kategorie: | Smartwatches |
Modell: | G1 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit MOTA G1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Smartwatches MOTA
14 Oktober 2024
Bedienungsanleitung Smartwatches
- Smartwatches Manta
- Smartwatches Denver
- Smartwatches Krüger And Matz
- Smartwatches MyKronoz
- Smartwatches Umidigi
- Smartwatches Allview
- Smartwatches Cubot
- Smartwatches Fierro
- Smartwatches Texas Instruments
- Smartwatches Tracer
- Smartwatches Valore
- Smartwatches Brigmton
- Smartwatches Goji
Neueste Bedienungsanleitung für -Kategorien-
14 Oktober 2024
11 Oktober 2024
11 Oktober 2024
9 Oktober 2024
13 Juli 2024
13 Juli 2024
12 Juli 2024
11 Juli 2024
11 Juli 2024
9 Juli 2024