Monitor Audio WSS130 Bedienungsanleitung

Monitor Audio Lautsprecher WSS130

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Monitor Audio WSS130 (11 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 21 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/11

INSTALLATION GUIDE

MANUALE DEL PRODOTTO E DI INSTALLAZIONE

GUIDE PRODUIT & INSTALLATION

PRODUKT- UND INSTALLATIONSHANDBUCH

GUÍA DE INSTALACIÓN Y DEL PRODUCTO

GUIA DO PRODUTO E INSTALAÇÃO

PRODUCT- EN INSTALLATIEHANDLEIDING

产品和安装指南

インスタレーションガイド

РУКОВОДСТВО ПО УСТАНОВКЕ И ЭКСПЛУАТАЦИИ

 

 

INSTRUKCJA INSTALACJI

Custom Install

INSTALLATION GUIDE

MANUALE DEL PRODOTTO E DI INSTALLAZIONE

GUIDE PRODUIT & INSTALLATION

PRODUKT- UND INSTALLATIONSHANDBUCH

GUÍA DE INSTALACIÓN Y DEL PRODUCTO

GUIA DO PRODUTO E INSTALAÇÃO

PRODUCT- EN INSTALLATIEHANDLEIDING

产品和安装指南

インスタレーションガイド

РУКОВОДСТВО ПО УСТАНОВКЕ И ЭКСПЛУАТАЦИИ

 

 

INSTRUKCJA INSTALACJI

Custom Install

ENGLISH

Custom Install Series2

Optimum Speaker Positioning

5 or 7 Channel System Atmos

2 Atmos speakers (in line with front left and right)

4 Atmos Speakers (in line with front left and right)

Prior to Fitting the Custom Install Series Speakers

CAUTION: These Custom Install loudspeakers can only be

ﬁxed into plasterboard (dry-lined) or suspended ceilings/ walls

with a thickness of up to 45mm (1 3/4”). Solid wall installation will

require channelling out and frame work constructed to provide a

structure for the Tri Grip dog legs to clamp to. For safety reasons, if you

are unsure of your ability to provide a secure and safe ﬁxing, do not

attempt to ﬁx these speakers, please obtain the services of a competent

and qualiﬁed trades person.

CAUTION: Ensure that there are no water pipes or electricity

cables running within the wall structure before cutting the

speaker apertures. Work from secure steps and avoid trailing

wires.

Painting the Grilles

NOTE: Do not paint the IW260X and 460X grilles as spare

scrims are not supplied.

NOTE: If choosing to paint the grille, we recommend you follow

these simple steps:

1. Remove the membrane scrim from the inside of the grille.

2. Paint all grilles required for the installation with the same batch of

paint (if they are to be the same colour). Spray paint is easier to

apply or use a stippling action when brushing to avoid blocking the

holes of the grille.

3. When dry, attach the spare membrane scrim (where supplied) into

the inside of the grille.

4. Fit the grille to the speaker (s).

Over Tightening Warning

ATTENTION INSTALLERS:

Do not over-tighten the Tri-Grip Dog Leg clamps. Over tightening the

clamping mechanism on any in ceiling/ in wall speaker can result in

damage to the speaker mounting hardware, ceiling/ wall or speaker

frame, and/ or deﬂection in the speaker frame during installation.

If you notice any of the above during installation, you have overtightened

the Tri Grip dog leg. Back off the mounting screw until deﬂection is

reduced to allow the product to sit ﬁrmly against the ceiling / wall.

Do not exceed 5Kgf/cm (4.34 lbf/inch.) or 0.5 NM when

tightening the Tri Grip dog leg screws.

When using a cordless screwdriver/ drill to install this product ensure the

clutch is set to it’s lowest setting to avoid over-tightening and damaging

the mounting hardware.

Speaker Controls

High Frequency Level Adjust

With the HF setting on the ‘0’ position, the speaker will give you a neutral

sound with no additional adjustments made. Switching to the ‘+db’

position will give the high frequencies a boost, giving you more clarity and

presence in the treble while switching to the ‘-db’ will do the opposite.

This position can be useful if you want more prominence in the bass

frequencies.

Mid Frequency Level Adjust

With the Mid setting on the ‘0’ position, the speaker will give you a neutral

sound with no additional adjustments made. Switching to the ‘+db’

position will give the Mid frequencies a boost, giving you warmer sound

with more presence in the vocal register while switching to the ‘-db’ will

do the opposite.

Boundary Compensation Switch

When a speaker is placed near a corner or wall it can sometimes make

the bass too ‘boomy’ as low frequencies reﬂect off the nearby surfaces.

If the bass is too ‘boomy’ for your liking then, like a port bung, the

Boundary Compensation switch can be used to dampen the bass being

produced by the speaker.

NOTE: As with all audio, the settings you chose to use are subject

to your own personal tastes and the affect your room has on the

acoustics. Experimentation is strongly advised to ﬁnd the best

setting for you.

Warranty

Both the craftsmanship and the performance of this product is covered by

the manufacturer’s warranty against manufacturing defects provided that

the product was supplied by an authorised Monitor Audio retailer under

the consumer sale agreement. For the period of cover please refer to the

product page on our website: monitoraudio.com for the product you have

purchased.

When purchasing Monitor Audio products, please keep your receipt of

purchase safe, as this validates your warranty.

90°-90°

110°-110°

135°-135°

150°-150°

0°

30°-30°

22°

-22°

2 Atmos speakers (in line with front left and right)

4 Atmos Speakers (in line with front left and right)

65°

100°

Ear Level

80°

30°

125°

150°

45° 55°

Ear Level

135°

CAUTION:

cables runn

speaker ap

Produktspezifikationen

Marke:	Monitor Audio
Kategorie:	Lautsprecher
Modell:	WSS130
Breite:	140.5 mm
Gewicht:	1400 g
Empfohlene Nutzung:	Universal
Produktfarbe:	Schwarz
Übertragungstechnik:	Kabelgebunden
Impedanz:	8 Ohm
Höhe:	385 mm
RMS-Leistung:	60 W
Menge pro Packung:	1 Stück(e)
Gehäusematerial:	Acrylonitrile butadiene styrene (ABS), Plastic
Audio Kanäle:	- Kanäle
Anzahl des Antriebs:	4
Frequenzbereich:	75 - 30000 Hz
Hochtöner:	Ja
Hochtönerdurchmesser (Imperial):	1 "
Sound Drucklevel (max):	105.6 dB
Lautsprecherplatzierung:	in-Wand/in-Decke
Anzahl der Hochtöner-Antriebe:	1
Hochtönerdurchmesser:	25 mm
Empfindlichkeit:	87 dB
Übergangsfrequenzen:	100 Hz
Lautsprechertyp:	Voller Bereich
Anzahl der mid-range Antriebe:	3
Treiberdurchmesser Mitteltöner (imperial):	3 "
Empfohlene Verstärkerleistung (max):	100 W
Empfohlene Verstärkerleisung (min):	10 W