MJX C4010 FPV Bedienungsanleitung

MJX Spielzeug C4010 FPV

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für MJX C4010 FPV (2 Seiten) in der Kategorie Spielzeug. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
1.Insert the TF memory card
into the camera.
1.Insert the TF memory card
into the camera.
1
1
4
C4010
720P AERIAL CAMERA
1.Connect the stand bar to
the mobile phone fixing
component.
2.Adjust the fixing component
upward or downward
according to the size of the
mobile phone.
3.Set the mobile phone holder
to the top of the remote
control.
4.Pull back the lock center of
the stand bar and slowly
push up the holder, the
mobilephone holder would
be taken down.
134
2
Install the holder of the mobile phone:
FPV camera #C4010 installation
2
6
5
23
3
2.The camera should be fastened
to the interface at the bottom of
the model, fix the camera by
screwing clockwise.
4
4.Fasten the antenna bracket
to the oblique tube of the
helicopter, then, install the
antenna to the antenna
bracket.
3.Insert the white camera plug
to the interface of the camera,
and then, connect the red plug
at the other end of the camera
wire with the interface of the
helicopter’s PCB.
2.The camera should be
fastened to the interface at
the bottom of the model,
fix the camera by screwing
clockwise.
5.Insert the antenna bracket
into interface of the foot
stand and lock the screws.
6.Install the antenna to the
antenna bracket.
3.Insert the camera wire plug
to the camera interface.
4.Insert the camera wire plug
to the port of C4010.
#C4010 3.7V installation( for quad-copter):
#C4010 3.7V installation ( for helicopter):
FPV software download and installation
#C4010 7.4V installation ( for helicopter):
1
6
5
23
4
1.Insert the TF memory card
into the camera.
2.The camera should be
fastened to the interface at
the bottom of the model,
fix the camera by screwing
clockwise.
124
3
4.Fasten the antenna bracket
to the oblique tube of the
helicopter, then, install the
antenna to the antenna bracket.
3.Insert the white camera plug
to the interface of the camera,
and then,Insert the plug at the
other end of the camera wire
to the camera interface of the
model.
5.Insert the antenna bracket
into interface of the foot
stand and lock the screws.
6.Install the antenna to the
antenna bracket.
1.Insert the TF memory card into
the camera.
2.The camera should be fastened
to the interface at the bottom
of the model, fix the camera
by screwing clockwise.
3.Insert the camera wire plug
to the camera interface.
4.Insert the plug at the other
end of the camera wire to the
camera interface of the model.
Contents
Install software:
1.Open the software
“MJX FPV”.
3.Image is showing
on the screen.
2.Click the
button.
#C4010 7.4V installation (for quad-copter):
For 3.7V
helicopter
For 3.7V
quad-copter
For 7.4V
helicopter/
quad-copter
Instructions:
Tips:
Please make sure that the memory card has been installed at the card slot before the camera is
powered on;when the camera is powered on, please do not insert the mermory card or take out
the memory card.
For Android system, please visit our website www.mjxtoys.com to download the software “MJX FPV”.
For Apple IOS system, please go to the APP store to download the software “MJX FPV”.
Power on the model, the FPV indicator light (at the bottom of the
helicopter) is on and in green color, 15 seconds later, the green
light will turn into red light and flash. Then, enter into settings of
the smart phone, open WIFI, search “MJX FPV **** “and connect
it. After successful connection, exit settings. Open “MJX FPV”
software at the smart phone and click the logo“MONITOR
to enter into the control interface to watch the real-time video.


Produktspezifikationen

Marke: MJX
Kategorie: Spielzeug
Modell: C4010 FPV

Brauchst du Hilfe?

Wenn Sie Hilfe mit MJX C4010 FPV benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Spielzeug MJX

Bedienungsanleitung Spielzeug

Neueste Bedienungsanleitung für -Kategorien-