Mitsubishi EX320U Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Mitsubishi EX320U (58 Seiten) in der Kategorie Videostrahl. Dieser Bedienungsanleitung war fĂĽr 68 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/58
EX320U-ST
ENGLISH
DLP™ PROJECTOR
MODEL
EX320U-ST
User Manual
This User Manual is important to you.
Please read it before using your projector.
EN-2
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsu-
lated "dangerous voltage" within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric
shock.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING
Use the attached specified power supply cord. If you use another
power supply cord, it may cause interference with radio and television
reception.
Use the attached RGB cable and the shielded LAN cable with this
equipment so as to keep interference within the limits of an FCC Class
B device.
This apparatus must be grounded.
DO NOT LOOK DIRECTLY INTO THE LENS WHEN THE
PROJECTOR IS IN THE POWER ON MODE.
CAUTION
Not for use in a computer room as defined in the Standard for the Pro-
tection of Electronic Computer/Data Processing Equipment, ANSI/
NFPA 75.
The attached power cord is to be used exclusively for this product.
Never use it for other products.
When using the projector in Europe:
COMPLIANCE NOTICE
This Projector complies with the requirements of the EC Directive
2004/108/EC "EMC Directive" and 2006/95/EC "Low Voltage Direc-
tive".
The electro-magnetic susceptibility has been chosen at a level that
gains proper operation in residential areas, on business and light
industrial premises and on small-scale enterprises, inside as well as
outside of the buildings. All places of operation are characterized by
their connection to the public low voltage power supply system.
WARNING
Use the attached RGB cable and the shielded LAN cable with this
equipment so as to keep interference within the limits of an EN55022
Class B device.
When using the projector in Korea:
WARNING
Use the attached RGB cable and the shielded LAN cable with this
equipment so as to keep interference within the limits of a K00022
Class B device.
Please follow WARNING instructions.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION:
TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUT-
LET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
NOTE:
SINCE THIS PROJECTOR IS PLUGGABLE EQUIPMENT, THE SOCKET-OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND
SHALL BE EASILY ACCESSIBLE.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
EN-3
ENGLISH
WARNING
• The lens cap is for protecting the lens. If you leave the lens cap on
the lens with the projector turned on, it may be deformed because of
heat build-up. Remove the lens cap when you turn on the projector.
• One of power cords for the U.S., Europe, U.K./Singapore, Australia,
Korea and Argentina is provided appropriately.
• This projector uses the power plug of three-pin grounding type. Do
not remove the grounding pin from the power plug. If the power plug
doesn’t fit your wall outlet, ask an electrician to change the wall out-
let.
• In case that the power cord for the U.S. is provided with this projec-
tor, never connect this cord to any outlet or power supply using other
voltages or frequencies than rated. If you want to use a power sup-
ply using other voltage than rated, prepare an appropriate power
cord separately.
• Use 100-240 V AC 50/60 Hz to prevent fire or electric shock.
• Do not place any objects on the power cord or do not place the pro-
jector near heat sources to prevent damage to the power cord. If the
power cord should be damaged, contact your dealer for replace-
ment because it may cause fire or electric shock.
• Do not modify or alter the power cord. If the power cord is modified
or altered, it may cause fire or electric shock.
Note: This symbol mark is for EU
countries only.
This symbol mark is according to
the directive 2002/96/EC Article 10
Information for users and Annex
IV, and/or to the directive 2006/66/
EC Article 20 Information for end-
users and Annex II.
Your MITSUBISHI ELECTRIC product is designed and manufactured with high quality
materials and components which can be recycled and/or reused.
This symbol means that electrical and electronic equipment, batteries and accumula-
tors, at their end-of-life, should be disposed of separately from your household waste.
If a chemical symbol is printed beneath the symbol shown above, this chemical sym-
bol means that the battery or accumulator contains a heavy metal at a certain concen-
tration. This will be indicated as follows:
Hg: mercury (0,0005%), Cd: cadmium (0,002%), Pb: lead (0,004%)
In the European Union there are separate collection systems for used electrical and
electronic products, batteries and accumulators.
Please, dispose of this equipment, batteries and accumulators correctly at your local
community waste collection/recycling centre.
Please, help us to conserve the environment we live in!


Produktspezifikationen

Marke: Mitsubishi
Kategorie: Videostrahl
Modell: EX320U
Eingebaute Lautsprecher: Ja
WLAN: Nein
Breite: 282 mm
Tiefe: 229 mm
Gewicht: 2500 g
Produktfarbe: WeiĂź
Ăśbertragungstechnik: Kabelgebunden
Höhe: 92 mm
Energiequelle: AC
RMS-Leistung: 2 W
Anzahl eingebauter Lautsprecher: 1
AC Eingangsspannung: 100 - 240 V
AC Eingangsfrequenz: 50 - 60 Hz
Eingebautes Display: Nein
Kopfhörerausgänge: 1
Fernbedienung enthalten: Nein
Anzahl Ethernet-LAN-AnschlĂĽsse (RJ-45): 1
Kontrastverhältnis: 2000:1
Anzahl HDMI-AnschlĂĽsse: 1
Stromverbrauch (Standby): - W
Geräuschpegel: - dB
Analoges Signalformatsystem: NTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM
RS-232 port: 1
Komponenteneingang Video (YPbPr/YCbCr): 1
UnterstĂĽtzte Video-Modi: 1080i, 1080p, 480i, 480p, 576i, 576p, 720p
3D: Nein
DVI Anschluss: Nein
Mikrofon-Eingang: Ja
Full-HD: Ja
Integrierter Kartenleser: Nein
Projektorhelligkeit: 3000 ANSI Lumen
Projektionstechnologie: DLP
native Auflösung des Projektors: XGA (1024x768)
Matrix Größe: 0.55 "
Projektionsflächenkapazität: 40 - 300 "
Projektionsabstand: 1.2 - 12 m
Anzahl VGA (D-Sub) AnschlĂĽsse: 2
Serielle Schnittstelle: RS-232
Seitenverhältnis: 4:3
Lebensdauer der Lichtquelle: 3500 h
Lampenleistung: 230 W
Typ der Lichtquelle: Lampe
Brennweitenbereich: - mm
Anzahl S-Video-Eingänge: 1
HD-Ready: Ja
Lebensdauer der Lichtquelle (ökonomischer Modus): 5000 h
Stromeingang: Ja
Projektionsverhältnis: 1.5 - 2.0:1
3D Ready: Ja
Lampenleistung (economic mode): 170 W
Ethernet/LAN: Ja

Brauchst du Hilfe?

Wenn Sie Hilfe mit Mitsubishi EX320U benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Videostrahl Mitsubishi

Bedienungsanleitung Videostrahl

Neueste Bedienungsanleitung fĂĽr -Kategorien-