Mircom MIX-5251APA Bedienungsanleitung

Mircom Rauchmelder MIX-5251APA

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Mircom MIX-5251APA (2 Seiten) in der Kategorie Rauchmelder. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/2
SS-400-002 1 I56-3321-000
MIX-5251APA, MIX-5251RAPA and MIX-5251HAPA
Intelligent Plug-In Temperature Sensors
INSTALLATION AND MAINTENANCE INSTRUCTIONS
25 Interchange Way,
Vaughan,Ontario L4K-5W3
905-660-4655, FAX: 905-660-4113
BEFORE INSTALLING
This sensor must be installed in compliance with the control panel system
installation manual. The installation must meet the requirements of the Au-
thority Having Jurisdiction (AHJ). Sensors offer maximum performance when
installed in compliance with CAN/ULC-S524.
Please read the system wiring and installation manual thoroughly. This man-
ual provides detailed information on sensor spacing, placement, zoning, and
special applications. Copies of these manuals are available from Mircom.
GENERAL DESCRIPTION
Models MIX-5251APA, MIX-5251RAPA and MIX-5251HAPA are intelligent
sensors that utilize a state-of-the-art thermistor sensing circuit for fast re-
sponse. These sensors are designed to provide open area protection with
50 foot spacing capability as approved by ULC. Model MIX-5251APA is a
fixed temperature sensor with 135°F fixed temperature alarm. Model MIX-
5251RAPA is a rate-of-rise temperature sensor with 135°F fixed temperature
alarm. Model MIX-5251HAPA is a high temperature sensor with 190°F fixed
temperature alarm.
Two LEDs on each sensor light to provide 360° visibility of the sensor indica-
tion. The LEDs can be latched ON by code command from the panel for an
alarm indication. The LEDs can also be unlatched to the normal condition
by code command. Remote LED annunciator capability is available as an
optional accessory (Part No. RA400ZA/RA100ZA).
Models MIX-5251APA, MIX-5251RAPA and MIX-5251HAPA require com-
patible addressable communications to function properly. Connect
these sensors to listed-compatible control panels only.
WIRING GUIDE
All wiring must be installed in compliance with the Canadian Electrical Code,
applicable local codes and the Authority Having Jurisdiction. Proper wire
gauges should be used. The installation wires should be color coded to limit
wiring mistakes and ease system troubleshooting. Improper connections will
prevent a system from responding properly in the event of a fire.
Remove power from the communication line before installing sensors.
1. Wire the sensor base (supplied separately) per the wiring diagram, see
Figure 1.
2. Set the desired address on the sensor address switches, see Figure 2.
3. Install the sensor into the sensor base. Push the sensor into the base
while turning it clockwise to secure it in place.
4. After all sensors have been installed, apply power to the control unit and
activate the communication line.
5. Test the sensor(s) as described in the TESTING section of this manual.
TAMPER RESISTANCE
The sensor bases have a tamper-resistant capability. When this capability is
enabled, sensors cannot be removed from the base without the use of a small
screwdriver or other similar tool. Refer to the sensor base installation instruc-
SPECIFICATIONS
Diameter: 6.1 inches (155 mm) installed in B210LPA; 4.1 inches (104 mm) installed in B501A
Height: 2.0 inches (51 mm)
Weight: 4.8 ounces (137 gm)
Installation Temperatures: –4°F to 100°F (–20°C to 38°C); MIX-5251APA and MIX-5251RAPA; –4°F to 150°F (–20°C to 66°C); MIX-5251HAPA
Operating Humidity Range: 10% to 93% Relative Humidity Non-condensing
Mounting: B210LPA flanged base; B501A flangeless base
Voltage Range: 15 to 32 Volts DC Peak
Standby Current: 300 µA @ 24 VDC (one communication every 5 seconds with LED blink enabled)
LED Current: 6.5 mA @ 24 VDC
Fixed Temperature Rating: 135°F (57°C); MIX-5251APA and MIX-5251RAPA; 190°F (88°C); MIX-5251HAPA
Rate of Rise Detection: Responds to greater than 15°F/min.; MIX-5251RAPA
tion manual for details in using this capability.
TESTING
Before testing, notify the proper authorities that the system is undergoing
maintenance, and will temporarily be out of service. Disable the system to
prevent unwanted alarms.
All sensors must be tested after installation and periodically thereafter. Test-
ing methods must satisfy the Authority Having Jurisdiction (AHJ). Sensors
offer maximum performance when tested and maintained in compliance with
CAN/ULC-S536. The sensor may be tested in the following ways:
A. TEST MAGNET (MODEL NO. M02-04)
1. Place the magnet against the cover in the magnet test area as
shown in Figure 3 to activate the test feature.
2. The LEDs should latch ON within 10 seconds, indicating alarm and
annunciating the panel.
3. Reset the detector at the system control panel.
B. DIRECT HEAT METHOD (HAIR DRYER OF 1000 – 1500 WATTS)
1. From the side of the detector, direct the heat toward the sensor. Hold
the heat source about 6 inches (15cm) away to prevent damage to
the cover during testing.
2. The LEDs on the detector should light when the temperature at the
detector reaches the alarm set point. If the LEDs fail to light, check
the power to the detector and the wiring in the detector base.
3. Reset the detector at the system control panel.
Detectors that fail these tests should be cleaned as described under MAIN-
TENANCE and retested. If the detectors still fail these tests they should be
returned for repair.
MAINTENANCE
NOTE: Before cleaning notify the proper authorities that the system is un-
dergoing maintenance, and therefore the system will temporarily be out of
service. Disable the loop or system undergoing maintenance to prevent un-
wanted alarms.
It is recommended that the sensor be removed from its mounting base for
easier cleaning and that sensors be cleaned at least once a year. Use a vac-
uum cleaner to remove dust from the sensing chamber.
FIGURE 3. VIEWS SHOWING POSITION OF TEST MAGNET.:
32
1
32
1
32
1
(–)
(+)
+ -
ULC LISTED COM TIBLEPA
CONTRO NELL PA
CAUTION: DO NOT LOOP WIRE
UNDER TERMINAL 1 OR 2.
BREAK WIRE RUN O PROVIDE T
SUPERVISION OF CONNECTIONS.
CLASS A OPTIONAL WIRING
REMOTE
ANNUNCIATOR
(–)
(+)
FIGURE 1: FIGURE 2. ROTARy DECADE ADDRESS SWITCHES:
TENS ONES
9
87
6
5
4
3
2
10
9
87
6
5
4
3
2
10
10
11
12
13
14
15
LE
D
TEST MAGNET
MARKER
LED
TEST
MAGNET
MARKER
FIGURE 4:
C0129-00
C0146-01
C0152-00
C0151-00
SS-400-002 2 I56-3321-000
©2012 Mircom
Mircom warrants its enclosed heat detector to be free from defects in materials and
workmanship under normal use and service for a period of three years from date of
manufacture. Mircom makes no other express warranty for this heat detector. No agent,
representative, dealer, or employee of the Company has the authority to increase or alter
the obligations or limitations of this Warranty. The Company’s obligation of this Warranty
shall be limited to the repair or replacement of any part of the heat detector which is
found to be defective in materials or workmanship under normal use and service during
the three year period commencing with the date of manufacture. After phoning Mircom’s
number 905-660-4655 for a Return Authorization number, send defective units post-
age prepaid to: Mircom, Returns Department, RA #__________, 25 Interchange Way,
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installa-
tion. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003
THREE-yEAR LIMITED WARRANTy
Vaughan, Ontario L4K-5W3. Please include a note describing the malfunction and sus-
pected cause of failure. The Company shall not be obligated to repair or replace units
which are found to be defective because of damage, unreasonable use, modifications,
or alterations occurring after the date of manufacture. In no case shall the Company
be liable for any consequential or incidental damages for breach of this or any other
Warranty, expressed or implied whatsoever, even if the loss or damage is caused by the
Company’s negligence or fault. Some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation or exclusion may not apply
to you. This Warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
Please refer to insert for the Limitations of Fire Alarm Systems
FM CLASSIFICATION
RTI ratings are for installations which must comply with FM 3210.
MIX-5251APA RTI: FAST
MIX-5251RAPA RTI: V2-FAST
MIX-5251HAPA RTI: QUICK

Produktspezifikationen

Marke: Mircom
Kategorie: Rauchmelder
Modell: MIX-5251APA

Brauchst du Hilfe?

Wenn Sie Hilfe mit Mircom MIX-5251APA benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Rauchmelder Mircom

Mircom

Mircom MIX-5251APA Bedienungsanleitung

18 August 2024

Bedienungsanleitung Rauchmelder

Neueste Bedienungsanleitung für -Kategorien-

FirstAlert

FirstAlert SA700 Bedienungsanleitung

16 Oktober 2024
Alecto

Alecto SA-100 Bedienungsanleitung

16 Oktober 2024
First Alert

First Alert HD6135FB Bedienungsanleitung

14 Oktober 2024
Clas Ohlson

Clas Ohlson 32-3383 Bedienungsanleitung

14 Oktober 2024
First Alert

First Alert SA710CE Bedienungsanleitung

11 Oktober 2024
Siemens

Siemens DELTA reflex SD230N Bedienungsanleitung

9 Oktober 2024
Elro

Elro FS151021M Bedienungsanleitung

9 Oktober 2024
TFA

TFA AirCo2ntrol Life Bedienungsanleitung

8 Oktober 2024
FireAngel

FireAngel HT-630-EU Bedienungsanleitung

7 Oktober 2024
Elro

Elro 2001-023 Bedienungsanleitung

4 Oktober 2024