Milwaukee M18 Fuel 2604-22 Bedienungsanleitung
Milwaukee
boormachine
M18 Fuel 2604-22
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Milwaukee M18 Fuel 2604-22 (11 Seiten) in der Kategorie boormachine. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/11
![](https://manualstech.ams3.cdn.digitaloceanspaces.com/html/nl/milwaukee/m18-fuel-2604-22/html/bg1.png)
M18™ CORDLESS 1/2" DRILL/DRIVER AND HAMMER DRILL/DRIVER
PERCEUSE-VISSEUSE ET PERCEUSE À PERCUSSION DE
M18™ 13 mm (1/2")
TALADRO DESTORNILLADOR Y TALADRO DE PERCUSIÓN
DE 13 mm (1/2") M18™
Cat. No.
No de cat.
2603-20
2604-20
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S
MANUAL.
AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN
COMPRENDRE LE MANUEL DE L'UTILISATEUR.
PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL
MANUAL DEL OPERADOR.
![](https://manualstech.ams3.cdn.digitaloceanspaces.com/html/nl/milwaukee/m18-fuel-2604-22/html/bg2.png)
23
1. Trigger
2. Control switch
3. LED
4. Keyless chuck
5. Torque selector collar
6. Application selector collar
7. Speed selector
1
2
4
5
3
67
FUNCTIONAL DESCRIPTION
SYMBOLOGY
Volts
Direct Current
No Load Revolutions per
Minute (RPM)
C US Underwriters Laboratories, Inc.
United States and Canada
SPECIFICATIONS
Cat. No.
Volts
DC No Load RPM BPM
2603-20 18 Low 0 - 550
High 0 - 1 850
--
--
2604-20 18 Low 0 - 550
High 0 - 1 850
Low 0 - 9350
High 0 - 31 450
Steel
Wood
MasonryFlat Bit Auger Bit Hole Saw Screws (dia.)
2603-20 1/2"
1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
3"
3"
3/8"
3/8"
--
--
2604-20 1/2"
1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
3"
3"
3/8"
3/8"
5/8"
5/8"
CAPACITIES
PERSONAL SAFETY
GENERAL POWER TOOL SAFETY WARNINGS
WORK AREA SAFETY
ELECTRICAL SAFETY
• Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
• Do not operate power tools in explosive atmos-
pheres, such as in the presence of fl ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
• Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
• Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodifi ed plugs and matching outlets will
reduce risk of electric shock.
• Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase
the risk of electric shock.
• Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
• When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use
of a cord suitable for outdoor use reduces the risk
of electric shock.
• If operating a power tool in a damp location is
unavoidable, use a ground fault circuit inter-
rupter (GFCI) protected supply. Use of an GFCI
reduces the risk of electric shock.
• Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
• Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewel-
lery or long hair can be caught in moving parts.
• If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
WARNING READ ALL SAFETY WARNINGS AND ALL INSTRUCTIONS. Failure
to follow the warnings and instructions may result in electric shock, fi re and/or serious
injury. Save all warnings and instructions for future reference. The term "power
tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated
(cordless) power tool.
POWER TOOL USE AND CARE
• Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
• Do not use the power tool if the switch does not
turn it on and o. Any power tool that cannot be
controlled with the switch is dangerous and must
be repaired.
• Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such pre-
ventive safety measures reduce the risk of starting
the power tool accidentally.
• Store idle power tools out of the reach of chil-
dren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in the
hands of untrained users.
• Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits
etc. in accordance with these instructions, tak-
ing into account the working conditions and
the work to be performed. Use of the power tool
for operations dierent from those intended could
result in a hazardous situation.
• Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the infl uence of drugs, alcohol or medi-
cation. A moment of inattention while operating
power tools may result in serious personal injury.
• Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
will reduce personal injuries.
• Prevent unintentional starting. Ensure the
switch is in the o-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with
your fi nger on the switch or energising power tools
that have the switch on invites accidents.
SERVICE
• Have your power tool serviced by a qualifi ed
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
SPECIFIC SAFETY RULES
BATTERY TOOL USE AND CARE
• Recharge only with the charger specifi ed by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fi re
when used with another battery pack.
• Use power tools only with specifi cally desig-
nated battery packs. Use of any other battery
packs may create a risk of injury and fi re.
• When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from one
terminal to another. Shorting the battery terminals
together may cause burns or a fi re.
• Under abusive conditions, liquid may be eject-
ed from the battery; avoid contact. If contact
accidentally occurs, fl ush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
• Wear ear protectors when impact drilling.
Exposure to noise can cause hearing loss.
• Use auxiliary handle(s), if supplied with the
tool. Loss of control can cause personal injury.
• Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its
own cord. Cutting accessory contacting a “live”
wire may make exposed metal parts of the power
tool “live” and could give the operator an electric
shock.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
• WARNING Some dust created by power sanding,
sawing, grinding, drilling, and other construction
activities contains chemicals known to cause
cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and
other masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dust masks that are spe-
cially designed to fi lter out microscopic particles.
![](https://manualstech.ams3.cdn.digitaloceanspaces.com/html/nl/milwaukee/m18-fuel-2604-22/html/bg3.png)
45
OPERATION
WARNING Always remove battery
pack before changing or removing acces-
sories. Only use accessories specifically
recommended for this tool. Others may be
hazardous.
WARNING To reduce the risk of injury,
wear safety goggles or glasses with side
shields.
WARNING To reduce the risk of injury,
always hold securely.
Selecting Drill or Drive Action
(Cat. No. 2603-20)
1. To use the drilling mode, rotate
the torque selector collar until the
drill symbol appears in line
with the arrow.
2. rotate To use the driving mode
the torque selector collar until the
desired clutch setting appears in
line with the arrow.
The adjustable clutch, when prop-
erly adjusted, will slip at a preset
torque to prevent driving the screw
too deep into different materials
and to prevent damage to the
screw or tool.
Selecting Hammer, Drill or Drive Action
(Cat. No. 2604-20)
1. To use the hammer-drilling
mode, rotate the application
selector collar until the hammer
symbol appears in line with
the arrow. Apply pressure to the bit
to engage the hammering mecha-
nism.
NOTE: The number selected on the torque
selector collar has no eect on operation of the
drill in hammer mode.
NOTE: When using carbide bits, do not use wa-
ter to settle dust. Do not attempt to drill through
steel reinforcing rods. This will damage the
carbide bits.
2. To use the drilling only mode,
rotate the application selector collar
until the drill symbol
appears
in line with the arrow.
NOTE: The number selected on the
torque selector collar has no eect
on operation of the drill in drilling
mode.
Clutch
Setting in. lbs Applications
1-5
6-10
11-15
16-20
21-24
5-25
28-39
42-68
73-84
86-95
Small screws in softwood.
Medium screws in softwood or small
screws in hardwood.
Large screws in softwoods. Medium
screws in hardwood or large screws in
hardwood with pilot hole.
NOTE: Because the settings shown in the table are only
a guide, use a piece of scrap material to test the dierent
clutch settings before driving screws into the workpiece.
Selecting Speed
The speed selector is on top of the motor housing.
Allow the tool to come to a complete stop before
changing speeds. See “Applications” for recom-
mended speeds under various conditions.
1. For Low speed, push the speed selector to
display “1”.
2. For High speed, push the speed selector to
display “2”.
Using the Control Switch
The control switch may be set to three positions:
forward, reverse and lock. Due to a lockout mecha-
nism, the control switch can only be adjusted when
the ON/OFF switch is not pressed. Always allow
the motor to come to a complete stop before using
the control switch.
For (clockwise) forward
rotation, push in the control
switch from the right side of
the tool. Check the direction
of rotation before use.
For (counterclock-reverse
wise) rotation, push in the
control switch from the left
side of the tool. Check direc-
tion of rotation before use.
To lock the trigger, push the
control switch to the center
position. The trigger will not work while the control
switch is in the center locked position. Always
lock the trigger or remove the battery pack before
performing maintenance, changing accessories,
storing the tool and any time the tool is not in use.
Installing Bits
Always remove the battery before inserting or
removing bits. Select the proper style and size bit
for the job.
This tool is equipped with a spindle lock. The chuck
can be tightened with one hand, creating higher grip
strengths on the bit.
1. To open the chuck jaws, turn the sleeve in the
counterclockwise direction.
When using drill bits, allow the bit to strike the
bottom of the chuck. Center the bit in the chuck
jaws and lift it about 1/16” o of the bottom.
When using screwdriver bits, insert the bit far
enough for the chuck jaws to grip the hex of the
bit.
2. To close the chuck jaws, turn the sleeve in the
clockwise direction. The bit is secure when the
chuck makes a ratcheting sound and the sleeve
can not be rotated any further.
3. To remove the bit, turn the sleeve in the coun-
terclockwise direction.
NOTE: A ratcheting sound may be heard when the
chuck is opened or closed. This noise is part of the
locking feature, and does not indicate a problem
with the chuck’s operation.
3. To use the driving screws mode
rotate the application selector col-
lar until the drive symbol ap-
pears in line with the arrow. Then
rotate the torque selector collar
until the desired clutch setting ap-
pears in line with the arrow.
The adjustable clutch, when properly adjusted,
will slip at a preset torque to prevent driving the
screw too deep into dierent materials and to
prevent damage to the screw or tool.
The torque specifi cations shown here are approximate
values obtained with a fully charged battery pack.
Lock
Push to
CENTER
Reverse
Forward
ASSEMBLY
WARNING Recharge only with the
charger specifi ed for the battery. For specifi c
charging instructions, read the operator’s
manual supplied with your charger and battery.
Inserting/Removing the Battery
To remove the battery, push in the release buttons
and pull the battery pack away from the tool.
To insert the battery, slide the pack into the body of
the tool. Make sure it latches securely into place.
Installing the Side Handle
1. To install the side handle,
loosen the side handle grip until
the hooks are far enough apart
to fi t into the slots on the gear
case ring. Position the side
handle on the top, pointing to
the left or right. Tighten the side
handle grip until it is secure.
2. To remove the side handle,
loosen the side handle grip
until the side handle can be
removed. Reposition and tighten securely.
WARNING To reduce the risk of injury,
always use a side handle when using this tool.
Always brace or hold securely. Ensure side
handle is tightened securely before each use.
Hooks
Slots
Starting, Stopping and Controlling Speed
1. To start the tool, grasp the handles fi rmly and
pull the trigger.
NOTE: An LED is turned on when the trigger is
pulled.
2. To vary the speed, increase or decrease the
pressure on the trigger. The further the trigger
is pulled, the greater the speed.
3. To stop the tool, release the trigger. Make sure
the bit comes to a complete stop before laying
the tool down.
Drilling
Place the bit on the work surface and apply fi rm
pressure before starting. Too much pressure will
slow the bit and reduce drilling effi ciency. Too little
pressure will cause the bit to slide over the work
area and dull the point of the bit.
If the tool begins to stall, reduce pressure slightly
to allow the bit to regain speed. If the bit binds,
reverse the motor to free the bit from the workpiece.
Produktspezifikationen
Marke: | Milwaukee |
Kategorie: | boormachine |
Modell: | M18 Fuel 2604-22 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Milwaukee M18 Fuel 2604-22 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung boormachine Milwaukee
![Milwaukee](/images/pdf_free.png)
8 September 2024
![Milwaukee](/images/pdf_free.png)
3 September 2024
![Milwaukee](/images/pdf_free.png)
3 September 2024
![Milwaukee](/images/pdf_free.png)
3 September 2024
![Milwaukee](/images/pdf_free.png)
3 September 2024
![Milwaukee](/images/pdf_free.png)
3 September 2024
![Milwaukee](/images/pdf_free.png)
13 August 2024
![Milwaukee](/images/pdf_free.png)
12 August 2024
![Milwaukee](/images/pdf_free.png)
9 August 2024
![Milwaukee](/images/pdf_free.png)
9 August 2024
Bedienungsanleitung boormachine
- boormachine Panasonic
- boormachine Cotech
- boormachine Makita
- boormachine Bosch
- boormachine Flex
- boormachine Parkside
- boormachine Vonroc
- boormachine AEG
- boormachine Velleman
- boormachine Powerfix
- boormachine Black And Decker
- boormachine Cocraft
- boormachine FERM
- boormachine Ryobi
- boormachine Skil
- boormachine Topcraft
- boormachine Trotec
- boormachine Maestro
- boormachine Carat
- boormachine Eibenstock
- boormachine Hilti
- boormachine Bort
- boormachine DeWalt
- boormachine Einhell
- boormachine Elu
- boormachine Festool
- boormachine Mafell
- boormachine Maktec
- boormachine Worx
- boormachine Hikoki
- boormachine Hitachi
- boormachine Hazet
- boormachine Kress
- boormachine Max
- boormachine Metabo
- boormachine Stanley
- boormachine Würth
- boormachine Güde
- boormachine Power Craft
- boormachine Scheppach
- boormachine Workzone
- boormachine Meec Tools
- boormachine Dremel
- boormachine Fieldmann
- boormachine EcoMAC
- boormachine Proxxon
- boormachine Westfalia
- boormachine Dedra
- boormachine DURO
- boormachine Graphite
- boormachine Silverline
- boormachine Holzmann
- boormachine Huvema
- boormachine Robust
- boormachine Stomer
- boormachine Yato
- boormachine Baumr-AG
- boormachine Genesis
- boormachine Toolland
- boormachine Batavia
- boormachine Bavaria
- boormachine Brüder Mannesmann
- boormachine Fein
- boormachine Craftsman
- boormachine Powerplus
- boormachine Rupes
- boormachine ProfiTech
- boormachine Alpha Tools
- boormachine Ozito
- boormachine Kawasaki
- boormachine Sun Joe
- boormachine Ridgid
- boormachine Porter-Cable
- boormachine Economy
- boormachine Fe Powertools
- boormachine Gamma
- boormachine Global
- boormachine Lux Tools
- boormachine Max Bahr
- boormachine Protool
- boormachine Spit
- boormachine Steren
- boormachine Tanaka
- boormachine Meister Craft
- boormachine Malmbergs
- boormachine RIKON
- boormachine Kreg
- boormachine Einhell Bavaria
- boormachine Powerblade
- boormachine Rok
- boormachine Tryton
- boormachine MyTool
- boormachine McKenzie
- boormachine Rodcraft
- boormachine Black Decker
Neueste Bedienungsanleitung für -Kategorien-
![Black And Decker](/images/pdf_free.png)
8 September 2024
![Makita](/images/logos/makita.png)
8 September 2024
![Black And Decker](/images/pdf_free.png)
8 September 2024
![Fein](/images/pdf_free.png)
8 September 2024
![Einhell](/images/pdf_free.png)
7 September 2024
![Einhell](/images/pdf_free.png)
6 September 2024
![ProfiTech](/images/pdf_free.png)
6 September 2024
![DeWalt](/images/logos/dewalt.png)
6 September 2024
![DeWalt](/images/logos/dewalt.png)
6 September 2024
![Stanley](/images/pdf_free.png)
6 September 2024