Milwaukee 5318-DE Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Milwaukee 5318-DE (8 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
Cat. No. / No de cat.
5318-DE
SDS MAX CHISEL BOOT
CAPUCHON DE BURIN MAX SDS
FUNDA PARA CINCEL SDS MAX
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
2
GENERAL SAFETY WARNINGS
WARNING
WHEN USING THE CHISEL BOOT,
BASIC PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED, INCLUDING THE
F OL L O W IN G : REA D THIS OP ERAT O R S
MANUAL, AS WELL AS YOUR TOOL AND
VACUUM OPERATORS MANUALS, AND ALL
LABELS ON THE CHISEL BOOT, TOOL, AND
VACUUM. FOR HOUSEHOLD OR COMMER-
CIAL USE.
WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
Do not use in the presence of explosive dust,
liquids or vapors.
Do not use where oxygen or anesthetics are used.
Do not allow to be used as a toy. Close attention
is necessary when used by or near children.
Use extra care when using on stairs.
ELECTRICAL SAFETY
Do not pick up wet material. Do not use water to
settle dust.
PERSONAL SAFETY
STAY ALERT. Watch what you are doing and use
common sense. Do not use dust extractor when you
are tired, distracted or under the inuence of drugs,
alcohol or medication causing diminished control.
The operation of a dust extractor can result in for-
eign objects being blown into eyes, which can result
in eye damage. Always wear safety goggles or glass-
es with side shields when operating dust extractor.
Wear a dust mask or use an OSHA compliant
dust extraction solution when working in dusty
situations. Dust particles can harm your lungs.
Do not overreach. Keep proper footing and bal-
ance at all times. This enables better control of the
dust extractor in unexpected situations.
Keep hair, loose clothing, ngers, and all parts
of body away from openings and moving parts.
Use only as described in this manual. Use only
manufacturer’s recommended attachments.
USE AND CARE
Do not use to pick up ammable or combustible
liquids such as gasoline or use in areas where they
may be present.
Do not pick up anything that is burning or smok-
ing such as cigarettes, matches, or hot ashes.
Do not pick up soot, cement, plaster or drywall
dust without lter in place. These are very ne
particles that may aect the performance of the
motor or be exhausted back into the air.
This product is suitable for collection of silica
dust when used in accordance with these in-
structions. To reduce the risk of health hazards
from other vapors or dust, do not vacuum
carcinogenic, toxic or hazardous materials
such as asbestos, arsenic, barium, beryllium, lead,
pesticides or other health endangered materials.
WARNING: Some dust created by power sanding,
sawing, grinding, drilling, and other construction
activities contains chemicals known to cause can-
cer, birth defects or other reproductive harm. Some
examples of these chemicals are:
lead from lead-based paint
crystalline silica from bricks and cement and other
masonry products, and
arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dust masks that are spe-
cially designed to lter out microscopic particles.
Do not put any object into openings. Do not use
with any opening blocked; keep free of dust, lint,
hair, and anything else that may reduce air ow.
Maintain dust extractor. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may aect the dust
extractor's operation. If damaged, have the dust
extractor repaired before use. Many accidents are
caused by poorly maintained tools.
WARNING
To reduce the risk of injury, when
working in dusty situations, wear
appropriate respiratory protection or use an
OSHA compliant dust extraction solution.
Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
SERVICE
Have your power tool serviced by a qualied
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
SPECIFIC SAFETY RULES
•The SDS Max Chisel Boot is compliant with Table
1 of OSHA Standard 29CRF 1926.1153 assuming
(1) it is used in accordance with MILWAUKEE
instructions and (2) it is attached to a dust collec-
tor that has a lter with 99% or greater eciency
and a lter-cleaning mechanism. Please refer-
ence https://www.osha.gov for further details
on compliance methods.
•Before using the chisel boot, read this operators
manual, your tool and vacuum manuals, and
all labels on the attachment, tool, and vacuum.
Wear ear protectors. Exposure to noise can cause
hearing loss.
Hold power tool by insulated gripping surfaces,
when performing an operation where the fas-
tener may contact hidden wiring. Fasteners con-
tacting a “live” wire may make exposed metal parts
of the power tool “live” and could give the operator
an electric shock.
READ AND SAVE ALL
INSTRUCTIONS
FOR FUTURE USE
3
SPECIFICATIONS
Cat. No. 5318-DE ....................................................
Chisel Width 1-1/8" ..................................................
Vacuum Port Outer Diameter 1-7/16" ......................
Vacuum Port Inner Diameter 1-1/4" .........................
Adaptor Outer Diameter 1-3/4" ................................
Adaptor Inner Diameter 1-1/2" .................................
Type SDS Max .........................................................
SYMBOLOGY
Read Operator's Manual
Hammer Mode
No Rotating Bits
ASSEMBLY
Installing/Removing Hose Attachment Clamp
To Install:
1. Place hose attachment clamp around the neck
of the tool.
2. Pull strap through to make a snug t against the
tool and close the large lever.
To Remove:
1. Open large lever and push in spring loaded tab.
2. With the small tab pushed in, pull strap out of
the small tab.
Connecting the Vacuum Hose
Attach vacuum hose to the hose attachment clamp.
1. Push "open" tab and lift top portion.
2. Insert hose into U channel.
3. Close top portion until it clicks.
OPERATION
WARNING
To reduce the risk of re and in-
jury, do not use to pick up am-
mable or combustible materials. Empty dust box
completely before use.
To reduce the risk of injury, always wear proper
eye protection marked to comply with ANSI Z87.1.
When working in dusty situations, wear appro-
priate respiratory protection or use an OSHA
compliant dust extraction solution.
1. Install a bull point or at chisel less than 1-1/8"
wide to the rotary hammer. WARNING! Do not
use a drill bit.
2. Place the chisel boot over the tip of the bull
point or flat chisel, leaving the tip extended
1-1/6" to 4".
1-1/6" - 4"
3. Attach the hose to the rotary hammer using the
hose attachment clamp. Adjust the hose attach-
ment clamp to the preferred level.
NOTE: Secure the strap around the rotary hammer
rst before attaching the hose.
4. Attach the 49-90-1959 hose clip adapter to the
connector at the end of the hose.
5. Attach the dust extractor to the hose clip adapter.
6. Turn the dust extractor to "automatic-cleaning"
mode.
MAINTENANCE
WARNING
To reduce the risk of injury, always
unplug the tool before performing
any maintenance. Never disassemble the tool.
Contact a MILWAUKEE service facility for ALL
repairs.
Maintaining Tools
Keep your tool in good repair by adopting a regular
maintenance program. Inspect your tool for issues
such as undue noise, misalignment or binding of
moving parts, breakage of parts, or any other condi-
tion that may aect the tool operation. Return the tool
to a MILWAUKEE service facility for repair. After six
months to one year, depending on use, return the
tool to a MILWAUKEE service facility for inspection.
WARNING
To reduce the risk of personal in-
jury, electric shock and damage,
never immerse your tool in liquid or allow a liquid
to ow inside it.
Cleaning
Clean dust and debris from vents. Keep handles
clean, dry and free of oil or grease. Use only mild
soap and a damp cloth to clean, since certain clean-
ing agents and solvents are harmful to plastics and
other insulated parts. Some of these include gasoline,
turpentine, lacquer thinner, paint thinner, chlorinated
cleaning solvents, ammonia and household deter-
gents containing ammonia. Never use ammable or
combustible solvents around tools.
Repairs
For repairs, return the tool to the nearest service
center.
ACCESSORIES
WARNING
Use only recommended accesso-
ries. Others may be hazardous.
For a complete listing of accessories, go online to
www.milwaukeetool.com or contact a distributor.
SERVICE - UNITED STATES
1-800-SAWDUST (1.800.729.3878)
Monday-Friday, 7:00 AM - 6:30 PM CST
or visit www.milwaukeetool.com


Produktspezifikationen

Marke: Milwaukee
Kategorie: Nicht kategorisiert
Modell: 5318-DE

Brauchst du Hilfe?

Wenn Sie Hilfe mit Milwaukee 5318-DE benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Milwaukee

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-