Milwaukee 48-59-1806 Bedienungsanleitung

Milwaukee Ladegerät 48-59-1806

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Milwaukee 48-59-1806 (16 Seiten) in der Kategorie Ladegerät. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/16
SIX-PACK
CHARGER
Milwaukee Electric T ool Corp.
Brookeld, WI 53005 USA
Cat. No. / No de cat.
48-59-1806
M18™ SIX-PACK CHARGER
M18™ LITHIUM-ION BATTERY PACKS
CHARGEUR À SIX BLOCS DE BATTERIES M18™
BLOCS DE BATTERIES LITHIUM-ION M18™
CARGADOR M18™ PARA SEIS BATERÍAS
BATERÍAS DE IONES DE LITIO M18™
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
New batteries must
be charged before
rst use.
L e s b a t t e r i e s
neuves doivent être
chargées avant leur
utilisation initiale.
Las baterías nuevas
se d eb en cargar
antes de usarlas por
primera vez.
2
1. SAVE THESE INSTRUCTIONS - THIS OP-
ERATOR’S MANUAL CONTAINS IMPORTANT
SAFETY AND OPERATING INSTRUCTIONS
FOR MILWAUKEE LI-ION BATTERY PACKS
AND THE MILWAUKEE LI-ION CHARGER.
2. BEFORE USING THE BATTERY PACK AND
CHARGER, READ THIS OPERATOR’S MAN-
UAL, YOUR TOOL OPERATOR’S MANUAL,
AND ALL LABELS ON THE BATTERY PACK,
CHARGER AND TOOL.
3.
CAUTION
TO REDUCE THE RISK OF IN-
JURY, CHARGE MILWAUKEE
M18™ LI-ION RECHARGEABLE PACKS ONLY
IN THEIR MILWAUKEE M18™ - LI-ION CHAR
GER. Other types of chargers may cause per-
sonal injury or damage. Battery pack and charger
are not compatible with ™-technology or NiCd V
systems. Do not wire a battery pack to a power
supply plug or car cigarette lighter. Battery packs
will be permanently disabled or damaged.
4. USE MILWAUKEE LI-ION PACKS ONLY ON
COMPATIBLE MILWAUKEE LI-ION TOOLS.
Battery pack and charger are not compatible with
V™-technology or NiCd systems. Use with other
tools may result in a risk of re, electric shock or
personal injury.
5. AVOID DANGEROUS ENVIRONMENTS. Do not
charge battery pack in rain, snow, damp or wet
locations. Do not use battery pack or charger in
the presence of explosive atmospheres (gaseous
fumes, dust or ammable materials) because
sparks may be generated when inserting or remov-
ing battery pack, possibly causing re.
6. CHARGE IN A WELL VENTILATED AREA.
Do not block charger vents. Keep them clear to
allow proper ventilation. Do not allow smoking or
open ames near a charging battery pack. Vented
gases may explode.
7. MAINTAIN CHARGER CORD. When unplug-
ging charger, pull plug rather than cord to
reduce the risk of damage to the electrical
plug and cord. Never carry charger by its cord.
Keep cord from heat, oil and sharp edges.
Make sure cord will not be stepped on, tripped
over or subjected to damage or stress. Do not
use charger with damaged cord or plug. Have
a damaged charger replaced immediately.
8. DO NOT USE AN EXTENSION CORD UNLESS
IT IS ABSOLUTELY NECESSARY. Using the
wrong, damaged or improperly wired extension
cord could result in the risk of re and electrical
shock. If an extension cord must be used, plug the
charger into a properly wired 16 gauge or larger
extension cord with pins that are the same number,
size and shape as the pins on the charger. Make
sure that the extension cord is in good electrical
condition.
9. CHARGER IS RATED FOR 120 VOLT AC ONLY.
Charger must be plugged into an appropriate
receptacle.
10. USE ONLY RECOMMENDED ATTACHMENTS.
Use of an attachment not recommended or sold
by the battery charger or battery pack manufac-
turer may result in a risk of re, electric shock or
personal injury.
11. UNPLUG CHARGER when not in use. Remove
battery packs from unplugged chargers.
12. TO REDUCE THE RISK OF ELECTRIC SHOCK,
always unplug charger before cleaning or mainte-
nance. Do not allow water to ow into AC/DC plug.
Use a Ground Fault Circuit Interrupter (GFCI) to
reduce shock hazards.
13. DO NOT BURN OR INCINERATE BATTERY
PACKS. Battery packs may explode, causing per-
sonal injury or damage. Toxic fumes and materials
are created when battery packs are burned.
14. DO NOT CRUSH, DROP, OR DAMAGE battery
pack. Do not use a battery pack or charger that
has received a sharp blow, been dropped, run
over, or damaged in any way (e.g., pierced with
a nail, hit with a hammer, stepped on).
15. DO NOT DISASSEMBLE. Incorrect reassembly
may result in the risk of electric shock, re or
exposure to battery chemicals. If it is damaged,
take it to a MILWAUKEE service facility.
16. BATTERY CHEMICALS CAUSE SERIOUS
BURNS. Never allow contact with skin, eyes, or
mouth. If a damaged battery pack leaks battery
chemicals, use rubber or neoprene gloves to
dispose of it. If skin is exposed to battery uids,
wash with soap and water and rinse with vin-
egar. If eyes are exposed to battery chemicals,
immediately ush with water for 20 minutes and
seek medical attention. Remove and dispose of
contaminated clothing.
17. DO NOT SHORT CIRCUIT. A short-circuited
battery pack may cause re, personal injury, and
product damage. A battery pack will short circuit
if a metal object makes a connection between
the positive and negative contacts on the battery
pack. Do not place a battery pack near anything
that may cause a short circuit, such as coins, keys
or nails in your pocket.
18. DO NOT ALLOW FLUIDS TO FLOW INTO BAT-
TERY PACK. Corrosive or conductive uids, such
as seawater, certain industrial chemicals, and
bleach or bleach containing products, etc., can
cause a short circuit..
19. STORE YOUR BATTERY PACK AND CHAR-
GER in a cool, dry place. Do not store battery
pack where temperatures may exceed 120°F
(50°C) such as in direct sunlight, a vehicle or
metal building during the summer.
20.
ALWAYS USE A SIDE HANDLE when using a
HIGH OUTPUT or HIGH DEMAND battery pack
6.0 Ah or above
; the output torque of some tools
may increase. If your drill/driver did not come with
a side handle, visit www. milwaukeetool.com for
the appropriate accessory handle.
IMPORTANT SAFETY INSTRUCTIONS
WARNING
READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all
instructions listed below, may result in electric shock, re and/or serious personal injury.
SAVE THESE INSTRUCTIONS
3
FUNCTIONAL
DESCRIPTION
SIX-PACK
CHARGE R
Mil waukee Electri c Tool Cor p.
Brookeld , WI 53005 USA
1. Contacts
2. Release buttons
3. Fuel Gauge button
4. Fuel Gauge
5. Electrical contacts
6. Bays
7. Vents
8. Cord
9. Skip button
10. Light indicators:
Continuous red: Charging
Continuous green light: Charging is complete
Fast ashing red: Battery is too hot/cold -
Charging will begin when battery
reaches correct charging
temperature
Slow ashing red: Battery charge is pending -
Charging will begin when the rst
pack is fully charged
Flashing red/green: Damaged or faulty battery pack
8
7
10
6
5
6
9
2
4
1
2
3
SYMBOLOGY
Volts
Direct Current
Alternating Current
Double Insulated
Properly Recycle Batteries
Hertz
Amps
UL Listing for Canada and U.S.
SPECIFICATIONS
Cat. No. 48-59-1806 ...............................................
Input Volts 120 AC ....................................................
Input Amps 2.1 AC....................................................
Output Volts .................................................. 18 DC
Output Amps ................................................ 3.5 DC
Recommended Ambient
Charging Temperature ................... 40°F to 105°F
M18™ Li-Ion Battery Packs ........................ 18 V DC
MILWAUKEE M18™
LI-ION BATTERY
PACKS
Fuel Gauge
Use the Fuel Gauge to deter
Less than 10% if bottom light
is ashing
Approximate Run
Time Remaining
78-100 %
55-77 %
33-54 %
10-32 %
mine the battery pack's re-
maining run time. Press the
Fuel Gauge button to dis-
play the lights. The Fuel
Gauge will light up for 2-3
seconds. When less than
10% of charge is left, 1 light
on the fuel gauge will ash
slowly.
NOTE: If the Fuel Gauge doesn't appear to be
working, place the battery pack on the charger and
charge as needed.
Compared to NiCd battery pack types, MILWAUKEE
Li-Ion battery packs deliver fade-free power for their
entire run time. The tool will not experience a slow,
gradual loss of power as you work. To signal the
end of discharge, 1 light on the fuel gauge will ash
quickly for 2-3 seconds and the tool will not run.
Charge the battery pack.
NOTE: Immediately after using the battery pack,
the Fuel Gauge may display a lower charge than it
will if checked a few minutes later. The battery cells
"recover" some of their charge after resting.
Battery Pack Protection
To protect itself from damage and extend its life, the
battery pack’s intelligent circuit monitors current draw
and temperature. In extremely high torque, binding,
stalling, and short circuit situations, the battery pack
will turn OFF the tool if the current draw becomes
too high. All the fuel gauge lights will ash. Release
the trigger and restart.
Under extreme circumstances, the internal tem-
perature of the battery could become too high. If
this happens, the fuel gauge lights will ash in an
alternating pattern and the tool will not run. Allow the
battery to cool down.
Fuel Gauge Lights Diagnosis Solution
Lights 1 - 4 Solid Remaining run time Continue working
1 Light, ashing
slowly
Less than 10% run
time left Prepare to charge pack
1 Light, ashing
quickly End of discharge Charge pack
Lights 1-4, ashing
quickly
Current draw too
high
Release trigger and
restart, reduce pressure
Lights 1&3 / 2&4,
ashing alternatingly
Battery temperature
too high
Release trigger and allow
battery to cool

Produktspezifikationen

Marke: Milwaukee
Kategorie: Ladegerät
Modell: 48-59-1806

Brauchst du Hilfe?

Wenn Sie Hilfe mit Milwaukee 48-59-1806 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Ladegerät Milwaukee

Milwaukee

Milwaukee M12-18AC Bedienungsanleitung

4 September 2024
Milwaukee

Milwaukee M12-18C Bedienungsanleitung

4 September 2024
Milwaukee

Milwaukee 48-59-1202 Bedienungsanleitung

15 August 2024
Milwaukee

Milwaukee 2510-20 Bedienungsanleitung

3 August 2024
Milwaukee

Milwaukee 48-59-2001 Bedienungsanleitung

29 Juli 2024
Milwaukee

Milwaukee 48-59-1806 Bedienungsanleitung

28 Juli 2024
Milwaukee

Milwaukee 48-59-0255 Bedienungsanleitung

27 Juli 2024
Milwaukee

Milwaukee 48-59-1811 Bedienungsanleitung

23 Juli 2024
Milwaukee

Milwaukee 48-59-1200 Bedienungsanleitung

15 Juli 2024
Milwaukee

Milwaukee 2951-20 Bedienungsanleitung

7 Juli 2024

Bedienungsanleitung Ladegerät

Neueste Bedienungsanleitung für -Kategorien-

MSW

MSW S-CHARGER-20A.2 Bedienungsanleitung

16 Oktober 2024
MSW

MSW S-CHARGER-10A.2 Bedienungsanleitung

16 Oktober 2024
ABB

ABB EVLunic Bedienungsanleitung

9 Oktober 2024
Powerplus

Powerplus POWDP9062 Bedienungsanleitung

8 Oktober 2024
Cellular Line

Cellular Line Wireless Power Dock Bedienungsanleitung

7 Oktober 2024
HQ

HQ CHARGER14 Bedienungsanleitung

4 Oktober 2024
Makita

Makita DC18RD Bedienungsanleitung

4 Oktober 2024
HQ

HQ CH02E Bedienungsanleitung

2 Oktober 2024
Venom

Venom VS5007 Bedienungsanleitung

1 Oktober 2024
Venom

Venom VS5010 Bedienungsanleitung

1 Oktober 2024