Milwaukee 48-22-8500 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Milwaukee 48-22-8500 (20 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 30 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/20
Cat. No. / No de cat.
48-22-8510, 48-22-8520
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
Este manual se aplica a los modelos anteriores (puede venderse por separado)
46" 8 DRAWER STEEL STORAGE CHEST &
46" 8 DRAWER STEEL STORAGE CABINET
COFFRE DE RANGEMENT AVEC 8 TIROIRS EN ACIER 1,16 m
(46") ET PLACARD DE RANGEMENT AVEC 8 TIROIRS EN ACIER
1,16 m (46")
CAJA DE ALMACENAMIENTO CON 8 CAJONES DE ACERO DE
1,16 m (46") Y GABINETE DE ALMACENAMIENTO CON 8
CAJONES DE ACERO DE 1,16 m (46")
2
IMPORTANT SAFETY INSRUCTIONS
WARNING
READ ALL SAFETY WARNINGS
AND ALL INSTRUCTIONS. Failure
to follow the warnings and instructions may re-
sult in serious injury. Save all warnings and in-
structions for future reference.
WORK AREA SAFETY
• -Use the chest/cabinet and accessories in ac
cordance with these instructions and in the
manner intended, taking into account the working
conditions. Use of the chest/cabinet for operations
dierent from those intended could result in a haz-
ardous situation.
•Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
Fully assemble the chest/cabinet according to the
assembly instructions. Do not leave o any pieces.
Chest must be fastened by screws through
connectors after it has been placed on top of cabinet.
Do not modify the chest/cabinet in any way. Use
only specically recommended accessories. Drilling
holes or modifying the chest/cabinet will lower the
load capacity, which can cause the chest/cabinet to
collapse, resulting in injury.
Lock wheels when chest/cabinet is not being
moved. Unlocked wheels can allow the chest/
cabinet to move unexpectedly.
•Keep the chest/cabinet on a level surface. Do not
load, unload, or park chest/cabinet on an incline.
The chest/cabinet may become unbalanced and tip,
resulting in injury.
Always balance the chest/cabinet load to avoid
tipping. Unbalanced chests/cabinets are more likely
to tip when being moved or when using the chest/
cabinet work surfaces. Evenly distribute the weight
front to back and side to side. Place more than half
the total load weight on the bottom cabinet when pos-
sible. To help prevent the chest/cabinet from tipping,
load the product starting with the bottom drawers.
Do not exceed the maximum product weight,
including contents. Do not exceed the maximum
weight for each drawer. Overloaded chests/
cabinets can tip, collapse, or damage drawer slides.
Do not open more than one drawer at a time.
Chest/cabinet may tip, causing injury.
Keep children and bystanders away while
loading, unloading, and moving chest/cabinet.
Distractions can cause you to lose control.
Only lift the chest/cabinet according to the
instructions in this manual. Never lift by the
side handle. Other methods may be dangerous,
resulting in injury.
Only transport the chest/cabinet when empty.
Properly secure when transporting.
Do not mount the chest/cabinet on a truck bed
or any other moving object.
Lock both the lid and all drawers before rolling
the chest/cabinet. The drawers could come open
and make the chest/cabinet unstable and tip.
Only roll the chest/cabinet short distances by
using the handle provided.
Secure all items before rolling the chest/cabinet.
Loose items could shift, causing the chest/cabinet
to become unstable.
Do not use drawers as steps. Do not stand on the
chest/cabinet. Chest/cabinet will tip, causing injury.
Be careful when closing the chest top cover.
Remove hands before closing the top cover.
• -Do not use chest/cabinet in explosive atmo
spheres, such as in the presence of ammable
liquids, gases or dust. This equipment has internal
arcing or sparking parts. Chest/cabinet should not
be located in a recessed area or below oor level.
Chest/cabinet plugs must match the outlet.
Never modify the plug in any way. Do not use
any adapter plugs with earth (grounded) chest/
cabinet power strips. Unmodied plugs and match-
ing outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
Maintain chest/cabinet. Check for misalignment
or binding wheels, breakage or bending of drawer
slides or other parts and any other condition that
may aect the chest/cabinet's operation. Do not use
damaged chest/cabinet.
Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
Have your chest/cabinet serviced by a qualied
repair person using only identical replacement
parts. Visit a local authorized service center for
repairs. Components, such as the power strip, are
not user replaceable. This will ensure that the safety
of the chest/cabinet is maintained.
Federal Communications Commission
WARNING: Changes or modications to this unit
not expressly approved by the party responsible for
compliance could void the user’s authority to operate
the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pur-
suant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harm-
ful interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment o and on, the user is encouraged to try
to correct the interference by one or more of the fol-
lowing measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
dierent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.
3
GROUNDING
WARNING
Improperly connecting the ground-
ing wire can result in the risk of
electric shock. Check with a qualied electrician
if you are in doubt as to whether the outlet is
properly grounded. Do not modify the plug pro-
vided with the chest/cabinet. Never remove the
grounding prong from the plug. Do not use the
chest/cabinet if the cord or plug is damaged. If
damaged, have it repaired before use. If the plug
will not t the outlet, have a proper outlet installed
by a qualied electrician.
Chests/Cabinets with Three Prong Plugs
Chests/cabinets marked Grounding Required
have a power strip with a three wire cord and three
prong grounding plug. The plug must be connected
to a properly grounded outlet (See Figure A). If the
power strip should electrically malfunction or break
down, grounding provides a low resistance path to
carry electricity away from the user, reducing the risk
of electric shock.
The grounding prong in the plug is connected through
the green wire inside the cord to the grounding sys-
tem in the power strip. The green wire in the cord
must be the only wire connected to the power strip's
grounding system and must never be attached to an
electrically “live” terminal.
Your power strip must be plugged into
Fig. A
an appropriate outlet, properly in-
stalled and grounded in accordance
with all codes and ordinances. The
plug and outlet should look like those
in Figure A.
SYMBOLOGY
Warning
Read Operator's Manual
Electrical Shock Hazard
Do not open more than one drawer at a
time. Chest/cabinet may tip, causing injury.
Be careful when closing the chest top
cover. Remove hands before closing
the cover.
Chest must be fastened by screws
through connectors after it has been
placed on top of cabinet.
Lock wheels when chest/cabinet is not
being moved. Unlocked wheels can allow
the chest/cabinet to move unexpectedly.
Do not use drawers as steps. Chest/
cabinet may tip, causing injury.
FPO
Lock both the lid and all drawers before
moving the chest/cabinet.
FUNCTIONAL DESCRIPTION
1
15
7
14
13
11
9
1. Top chest
2. Chest mat
3. Lock
4. Bracket
5. Cord storage bracket
6. Gas lift strut
7. Cabinet mat
8. Rolling cabinet
9. Key
10. Bumper
11. Rigid caster
2
3
4
8
5
10
6
12. Tool organizer
13. Drawer slide
14. Swivel caster
with brake
15. Charger mounts
16. Power strip
17. Side handle
12
17
16
SPECIFICATIONS
Cat. No. 48-22-8510 and 48-22-8520* ....................
Two-slide drawer capacity 100 lbs. (45.4 kg)
...........
Four-slide drawer capacity 200 lbs. (90.7 kg)
..........
Total capacity 1800 lbs. (816.5 kg) ...........................
AC input volts 125 ....................................................
Hertz 60 ....................................................................
Watts 1875 ...............................................................
Recommended Ambient Operating
Temperature 0°F to 104°F (-18°C 40°C)
........... to
* Items may be sold separately.


Produktspezifikationen

Marke: Milwaukee
Kategorie: Nicht kategorisiert
Modell: 48-22-8500

Brauchst du Hilfe?

Wenn Sie Hilfe mit Milwaukee 48-22-8500 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Milwaukee

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-