Milwaukee 2269-20NST Bedienungsanleitung
Milwaukee
Umweltthermometer
2269-20NST
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Milwaukee 2269-20NST (9 Seiten) in der Kategorie Umweltthermometer. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/9
Cat. No. / No de cat.
2269-20
30:1 INFRARED/CONTACT TEMP-GUN™
TEMP-GUN™ À INFRAROUGE/CONTACT 30:1
TERMÓMETRO INFRARROJO/CONTACTO TEMP-GUN™ 30:1
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT Afi n de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
23
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING
Read all safety warnings and in-
structions. Failure to follow the
warnings and instructions may result in electric
shock, fi re and/or serious injury. Save these instruc-
tions - This operator’s manual contains important
safety and operating instructions for the
MILWAUKEE Infrared Temp-Gun™ Thermometer.
Before using the Temp-Gun™, read this opera-
tor’s manual and all labels on the Temp-Gun™.
LASER SAFETY
• Laser light - Do not stare into beam or view di-
rectly with optical instruments. Do not point laser
light at others. Laser light can cause eye damage.
• Avoid exposure to laser radiation. Laser may emit
hazardous radiation.
• Do not point laser at refl ective surfaces. Unpre-
dictable results may occur.
WORK AREA SAFETY
• Keep children and bystanders away while oper-
ating Temp-Gun™. Store idle Temp-Guns™ out
of the reach of children and do not allow persons
unfamiliar with the tool or these instructions to
operate them.
• Avoid dangerous environments. Do not use in
rain, snow, damp or wet locations. Do not use in
the presence of explosive atmospheres (gaseous
fumes, dust or fl ammable materials) because sparks
may be generated when inserting or removing bat-
teries, possibly causing fi re.
PERSONAL SAFETY
• Stay alert, watch what you are doing and use
common sense when operating Temp-Gun™.
Do not use while you are tired or under the infl u-
ence of drugs, alcohol or medication. A moment
of inattention may result in serious personal injury.
• Do not overreach. Keep proper footing and bal-
ance at all times. This enables better control in
unexpected situations.
BATTERY USE AND CARE
• This tool is designed to be powered by one (1) 9V
battery properly inserted into the MILWAUKEE
Temp-Gun™. Do not attempt to use with any other
voltage or power supply.
•Do not leave battery within the reach of children.
• Install battery according to polarity (+ / –) dia-
grams.
• Properly dispose of used batteries immediately.
• Do not incinerate or dismantle batteries.
• Under abusive conditions, liquid may be ejected
from the battery, avoid contact. If contact ac-
cidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
SERVICE
• Have your Temp-Gun™ serviced by a qualifi ed
repair person using only identical replacement
parts. This will ensure that the safety of the tool is
maintained.
• Do not disassemble. Incorrect reassembly may
result in the risk of electric shock or fi re. If it is dam-
aged, take it to a MILWAUKEE service facility.
• Store in a cool, dry place. Do not store where
temperatures may exceed 140°F (60°C) such as
in direct sunlight, a vehicle or metal building during
the summer.
• Do not remove or deface labels. Maintain
labels and nameplates. These carry important
information. If unreadable or missing, contact a
MILWAUKEE service facility for a free replacement.
Federal Communications
Commission
WARNING
Changes or modifi cations to this unit
not expressly approved by the party
responsible for compliance could void the user’s
authority to operate the equipment.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful in-
terference in a residential installation. This equipment
generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance
with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or televi-
sion reception, which can be determined by turning
the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Consult the dealer or an experienced radio/TV
technician for help.
SYMBOLOGY
Volts
Direct Current
CAUTION
Laser Light -
Do Not Stare Into Beam
Laser Product
Avoid Exposure: Laser Radiation Is
Emitted From Aperture
To reduce the risk of injury, user must
read operator's manual.
45
SPECIFICATIONS
Cat. No. ..................................................... 2269-20
IR Temperature range ................... -40°C to 800°C
(-40°F to 1472°F)
IR Accuracy ............ -40°C to -18°C (-40°F to 0°F):
±2.0°C (4°F) + 0.1°C / 1°C
-18°C to 10°C (0°F to 50°F): ±2.5°C (5°F)
10°C to 800°C (50°F to 1472°F): ±2°C (4°F)
or ±2% of reading, whichever is greater
*Assume ambient operating temperature of
23°C ±2°C (70°F to 77°F)
Repeatability .....................±0.8% OR ±1°C (±2°F)
(whichever is greater)
Temperature display resolution .............0.1°C/°F
in Primary and Secondary
Distance to spot (90% energy) ..................30 to 1
K-Type Temperature range .......... -40°C to 550°C
(-40°F to 1022°F)
K-Type Temperature accuracy ..........±2°C (±4°F)
OR ±2% (whichever is greater)
Emissivity ....................... Adjustable from 0.1-0.99
in steps of 0.01
Response time .....................................<500 msec
Spectral response ................................ 8 to 14μm
Drop ..........................................................2 meters
Log spaces .........................................................99
Laser Type ..................................................Class II
Max Power ................................................... <1mW
Wavelength ........................................ 630-670 nm
Operating temperature ....................... 0°c to 50°C
(32°F to 122°F)
Storage temperature ...................... -20°C to 60°C
(-4°F to 140°F) without battery
Relative humidity ...................... maximum 85% for
for temperature less than 25°C,
decreasing linearly to 10 to 45% at 50°C
Voltage ........................... 9 DC (one (1) 9V battery)
Battery life ...Greater than 12 hrs with all functions
FUNCTIONAL DESCRIPTION
Distance to Spot: 30:1 —— Center of Spot
– – – Laser pointer (approx. 3/4" above center of spot)
Spot size at distance indicated
At 5' away, spot is 2.5" in diameter
At 3' away, spot is 1.2" in diameter
At 1' away, spot is 0.9"
in diameter
NOTE: A quick change in
temperature (>10°F) af-
fects the meter’s readings.
Allow the meter to reach
ambient temperature be-
fore use (5 to 30 minutes,
depending on temperature
change).
5
6
1. Laser window
2. 2269-20 nameplate
3. Trigger
4. K-Type connector
5. Display
6. Control buttons
7. Battery door lock
8. Battery door
9. Emissivity
10. Battery indicator
11. Hold indicator
12. Laser active indicator
13. Trigger lock indicator
14. Alarm indicator
15. K-Type indicator
16. °C or °F indicator
17. Primary measurement
18. Log indicator
19. Secondary measurement
20. Mode indicator
21. Mode button
22. Up arrow
23. Alarm button
24. Set button
25. Down arrow
26. Log button
11
12
13
17
20
14
10
16
2
3
8
7
1
2
915
19 18
4
22
23
21
24 25 26
2. Press the up or down arrows to
toggle between temperatures. Wait
5 seconds for the ranges to save
and exit.
Alarm High (HI)
If the set temperature is reached dur-
ing a scan, the primary measurement
will fl ash and alarm will sound.
Alarm Low (LOW)
If the set temperature is reached during a scan, the
primary measurement will fl ash and alarm will sound.
Setting the Emissivity
To set the emissivity value, pull the trigger and then
press the SET button four times. Press the up and
down arrow buttons to adjust the numeric value. Wait
5 seconds for the setting to save and exit.
Contact Temperature Measurement with
K-Type Probe
Only use K-type Temperature Probes with this meter.
1. Insert the probe. The unit detects a connection of a
K-type probe and displays the contact temperature
(KTC) as the primary measurement.
2. The display will continue to update the contact
temperature (KTC) while the temperature probe
reaches thermal equilibrium with the object being
measured.
3. To return to IR mode, remove the K-type probe.
Log
1. Press the LOG button to toggle the
log segments on and off. Press the
up or down arrows to scroll through
saved logs.
2. To record a log, press the LOG
button to turn on the log seg-
ments. While the unit is actively
taking measurements or while the
unit is in hold, press and hold the
LOG button. The recorded value
will appear in the secondary mea-
surement, and the correlating log
number will blink to confi rm saving.
Both the secondary measurement
and the log segment will fl ash fi ve
times to indicate the record is saved.
Once the max amount of logs have
been reached, the log number starts
over again at 1.
Low Battery
When the Low Battery icon is dis-
played, change the battery.
Mode Description
MAX Displays maximum temperature mea-
sured during a continuous reading
MIN Displays minimum temperature measured
during a continuous reading
AVG
Displays average temperature of last 20
measurements during a continuous reading
DIF Displays the difference between MAX
and MIN during a continuous reading
ASSEMBLY
Loading/Changing the Battery
1. Using a fl at screwdriver,
rotate the battery door lock
to the unlocked position
and open the battery door.
2. Connect one (1) 9V bat-
tery to the connector
block. Fit the battery into
the compartment.
3. Close the battery door.
Turn the battery door lock
to the locked position.
Selecting Celsius or Fahrenheit
To set the temperature scale, pull the trigger and
then press the SET button three times. Press the
buttons above the up and down arrows to toggle
between °C and °F. Wait 5 seconds for the setting
to save and exit.
Setting the Laser Lock
To turn the laser on and off, pull the trigger and then
press the SET button fi ve times. Press the buttons
above the up and down arrows to toggle between
ON and OFF. Wait 5 seconds for the setting to save
and exit.
OPERATION
Scanning Object Temperature
1. Pull and hold the trigger for at least 2 seconds and
scan the surface temperature of an object. A laser
pointer is used for aiming on the
area being scanned.
NOTE: The object should be larger
than the spot being scanned. If
not, readings will be affected. See
Distance-To-Spot for necessary
object size.
2. As you continue to hold the trigger,
the icon is displayed along
with the primary measurement
(surface temperature) and sec-
ondary measurement (maximum,
minimum, average, or differential
temperature) readings.
3. Release the trigger. HOLD is
displayed until the screen shuts off in about ten
seconds.
Setting the Trigger Lock
To turn the trigger lock on and off, pull the trigger
and then press the SET button six times. Press the
buttons above the up and down arrows to toggle
between ON and OFF. Wait 5 seconds for the setting
to save and exit.
Temperature Alarm
Press the ALARM button to turn on
the alarm function. The bell icon is
displayed. If the temperature reading
is outside the preset range, the tem-
perature reading will fl ash. Alarm will
sound.
Setting Preset Range
for the Alarm
1. To set the alarm range, pull the trig-
ger and then press the SET button.
Repeat to toggle between HI and
LO settings.
Produktspezifikationen
| Marke: | Milwaukee |
| Kategorie: | Umweltthermometer |
| Modell: | 2269-20NST |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Milwaukee 2269-20NST benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Umweltthermometer Milwaukee
20 Juli 2024
Bedienungsanleitung Umweltthermometer
- Umweltthermometer Velleman
- Umweltthermometer EMOS
- Umweltthermometer Technoline
- Umweltthermometer TFA
- Umweltthermometer Ryobi
- Umweltthermometer Pyle
- Umweltthermometer Extech
- Umweltthermometer Fluke
- Umweltthermometer La Crosse Technology
- Umweltthermometer Uni-T
- Umweltthermometer AcuRite
- Umweltthermometer Alpin
Neueste Bedienungsanleitung für -Kategorien-
23 September 2024
14 September 2024
9 September 2024
28 August 2024
11 August 2024
11 August 2024
10 August 2024
9 August 2024
9 August 2024
8 August 2024