Miller CX10 Bedienungsanleitung

Miller Stativ CX10

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Miller CX10 (11 Seiten) in der Kategorie Stativ. Dieser Bedienungsanleitung war für 29 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/11
Fluid Head
OPERATOR’S
MANUAL
1090
Compassx
2
Fluid Head
1092
Compassx
6 Fluid Head
1093
Compassx
8
Fluid Head
1096
Compassx
10 Fluid Head
1098
Compassx
18 Fluid Head
2
Features and Controls
Fig. 1 Fig. 2
Handle Clamp
LED Button Pan Lock
Spare Camera Screws
Pan Drag Ring
Tilt Lock
Slide Lock Lever
Counterbalance Selector Ring
Ball Clamp
Tilt Drag Ring
M10 Stud
Accessory Mounts
CB PLUS Selector Safety Release Lever
Platform
3
Thank you for purchasing the Compass
x
Fluid Head. The
Compass
x
Fluid Head has been designed to suit a wide range of
cameras, lenses and accessories as demanded by professional
users.
The robust design and construction of the Compass
x
Fluid Head
offers maximum stability and durability and includes a precision
drag plate system in the pan and tilt assembly to deliver true uid
drag performance over the entire temperature and payload range.
The uid drag and the counterbalance system were designed to
provide excellent control and repeatability and offer progressive
equal increments of drag and torque through the unique radial
ring design.
The Compass
x
Fluid Head will give best performance when
used on a wide range of Miller tripods, including SOLO, Toggle,
Sprinter II and HD Tripods (depending on bowl size). This will
ensure maximum system stability to suit any professional set-
up. The Compass
x
Fluid Head will suit most industry standard
75mm and 100mm tripods as well, please refer to manufactures
manual for mounting details.
Introduction Safety Instructions
Please use this manual to familiarise yourself with the operation
of the Compass
x
Fluid Head and observe these instructions
to prevent any damage to your equipment. Ensure that all
equipment is operating correctly and free from defects and
damage, also please ensure that the tripod is steady, secure and
that the bowl is approximately horizontal when attaching the
camera. The operator is responsible for the safe operation of this
piece of equipment.
Do not exceed the maximum payload capacity of the Fluid
Head.
Do not leave the camera unattended on the Fluid Head.
Do not release the SLIDE LOCK LEVER whilst the camera is at
an angle.
Do not adjust the tripod whilst the camera is attached to the
Fluid Head.
Ensure PAN HANDLE CLAMP and CLAMP NUT is securely
tightened.
Apply TILT LOCK when adding/removing equipment from
the camera or when attaching/removing the camera from the
Fluid Head.
Hold camera securely whilst changing Counterbalance, Pan
Drag or Tilt Drag settings.
Hold the camera securely whilst releasing the SAFETY
RELEASE LEVER.
Hold camera securely whilst adjusting the CLAMP NUT to
level the Fluid Head.


Produktspezifikationen

Marke: Miller
Kategorie: Stativ
Modell: CX10

Brauchst du Hilfe?

Wenn Sie Hilfe mit Miller CX10 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Stativ Miller

Bedienungsanleitung Stativ

Neueste Bedienungsanleitung für -Kategorien-