Mikrotik hAP ac3 LTE6 kit Bedienungsanleitung

Mikrotik Router hAP ac3 LTE6 kit

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Mikrotik hAP ac3 LTE6 kit (7 Seiten) in der Kategorie Router. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/7

hAP ac3 LTE6 kit

hAP ac3 LTE6 kithAP ac3 LTE6 kit

The hAP ac3 LTE6 kit is a simple home wireless access point. It is configured out of the box, you can simply insert your SIM card and start using wireless

internet.

Safety Warnings

Before you work on any equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing

accidents.

Ultimate disposal of this product should be handled according to all national laws and regulations.

The Installation of the equipment must comply with local and national electrical codes.

Failure to use the correct hardware or to follow the correct procedures could result in a hazardous situation to people and damage to the system.

Read the installation instructions before connecting the system to the power source.

Quickstart

Please follow these quick steps to set up your device:

Insert micro SIM card into the slot;

After inserting the SIM card close to the SIM port lid, do not remove the card while the device is powered on.

Connect the device to the power source (see " ");Powering

Open network connections on your PC, mobile phone, or other device and search for MikroTik wireless network and connect to it;

The configuration has to be done through the wireless network using a web browser or mobile app - (see " "). Alternatively, MikroTik mobile app

you can use a WinBox configuration tool ;https://mt.lv/winbox

Once connected to the wireless network, open in your web browser to start configuration, user name: a and there is no https://192.168.88.1

dmin

password by default;

When using a mobile application choose Quick setup and it will guide you through all necessary configuration in six easy steps;

Click the "Check for updates" button on the right side and update your RouterOS software to the latest version, must have a valid SIM card

inserted;

To personalize your wireless network, SSID can be changed in the fields "Network Name";

Choose your country on the left side of the screen in the field "Country", to apply country regulation settings;

Set up your wireless network password in the field "WiFi Password" the password must be at least eight symbols;

Set up your router password in the bottom field "Password" to the right and repeat it in the field "Confirm Password", it will be used to login next

time;

Click on the "Apply Configuration" to save changes.

MikroTik mobile app

Use the MikroTik smartphone app to configure your router in the field, or to apply the most basic initial settings for your MikroTik home access point.

It is the customer's responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling

requirements, and Dynamic Frequency Selection (DFS) requirements. All Mikrotik radio devices must be professionally installed.

Scan QR code and choose your preferred OS.

Install and open application.

By default, the IP address and user name will be already entered.

Click Connect to establish a connection to your device through a wireless network.

Choose Quick setup and application will guide you through all basic configuration settings in a couple of easy steps.

An advanced menu is available to fully configure all necessary settings.

Powering

The device accepts powering from the adapter:

Direct-input power jack (5.5 mm outside and 2 mm inside, female, pin positive plug) 12-28 V DC.

The power consumption under maximum load can reach 16 W, with attachments 22 W.

Base plate mounting instruction

The base plate comes with the package, in order to assemble please follow these instructions.

Place the small tip of the base plate into the case on the bottom of the device and fold it down.

While holding with both hands, use fingers to slightly press it and push down till it locks, follow the sequence on the illustration.

Configuration

Once logged in, we recommend clicking the "Check for updates" button in the QuickSet menu, as updating your RouterOS software to the latest version

ensures the best performance and stability. For wireless models, please make sure you have selected the country where the device will be used, to

conform with local regulations.

RouterOS includes many configuration options in addition to what is described in this document. We suggest starting here to get yourself accustomed to

the possibilities: . In case IP connection is not available, the Winbox tool ( ) can be used to connect to the MAC address https://mt.lv/help https://mt.lv/winbox

of the device from the LAN side (all access is blocked from the Internet port by default).

For recovery purposes, it is possible to boot the device for reinstallation, see section .Buttons and Jumpers

Mounting

The device is designed to be used indoors and placed on a flat surface with all needed cables connecting to the back of the unit.

The mounting base can be attached to the wall with the provided screws:

Attach the base to the wall, using provided screws;

Attach the unit to the mounting base by following previously instructions in the base plate section.

For optimal performance, ensure good airflow and place the device on the stand in an open space.

Extension Slots and Ports

Five Gigabit Ethernet ports, supporting automatic cross/straight cable correction (Auto MDI/X), so you can use either straight or cross-over cables

for connecting to other network devices.

Integrated Wireless 5GHz, 802.11a/n/ac and 2.4 GHz b/g/n.

SIM slot.

Buttons and Jumpers

The has the following default functions, or can be modified to run scripts:

reset button

reset buttonreset button

Hold this button during boot time until the LED light starts flashing, release the button to reset RouterOS configuration (total 5 seconds).

Keep holding for 5 more seconds, LED turns solid, release now to turn on CAP mode. The device will now look for a CAPsMAN server (total 10

seconds).

Or Keep holding the button for 5 more seconds until LED turns off, then release it to make the RouterBOARD look for Netinstall servers (total 15

seconds).

Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed before power is applied to the device.

Useful for RouterBOOT debugging and recovery.

The Mode Button

Mode Button

Mode ButtonMode Button enables the execution of custom scripts, that can be added by the user.

Warning! This equipment should be installed and operated with a minimum distance of 20 cm between the device and your body. Operation of

this equipment in the residential environment could cause radio interference.

Produktspezifikationen

Marke:	Mikrotik
Kategorie:	Router
Modell:	hAP ac3 LTE6 kit
Anzahl Prozessorkerne:	4
Prozessortaktfrequenz:	716 MHz
USB Anschluss:	Ja
WLAN-Standards:	802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Breite:	251 mm
Tiefe:	129 mm
AC-Netzadapter:	Ja
Produkttyp:	Tabletop-Router
Produktfarbe:	Weiß
Höhe:	39 mm
Energiequelle:	Gleichstrom
Anzahl USB 2.0 Anschlüsse:	1
Gleichstrom-Anschluss (DC):	Ja
Betriebstemperatur:	-30 - 60 °C
Schnittstellentyp Ethernet-LAN:	Gigabit Ethernet
Zertifizierung:	CE, FCC, IC, EAC, ROHS
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	5
Ethernet LAN Datentransferraten:	10,100,1000 Mbit/s
Antenne Zunahmeniveau (max):	5.5 dBi
Anzeigelicht:	Ja
Prozessor:	Qualcomm Atheros IPQ4019
Mobilfunknetzgenerierung:	4G
SIM-Kartentyp:	MicroSIM
4G-Standard:	LTE-TDD & LTE-FDD
unterstützte 4G-Bandbreiten:	700,800,850,900,1800,1900,2100,2300,2500,2600 MHz
Ausgangsspannung:	12 - 28 V
Speicherkapazität:	256 MB
Top WLAN-Standard:	Wi-Fi 5 (802.11ac)
Ethernet-WAN:	Ja
DSL-WAN:	Nein
SIM-Karten-Slot:	Ja
WLAN-Band:	Dual-Band (2,4 GHz/5 GHz)
WLAN Datentransferrate (max.):	1167 Mbit/s
3G:	Ja
4G:	Ja
Antennen-Design:	Intern
Reset-Knopf:	Ja
Eingebauter Prozessor:	Ja
Flash-Speicher:	16 MB
5G:	Nein
Unterstützte GSM-Bandbreiten:	850,900,1800,1900 MHz
Schrauben enthalten:	Ja
Unterstützte UMTS-Bandbreiten:	850,900,1900,2100 MHz
Ethernet/LAN:	Ja