Mikoterm eCompact Plus Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Mikoterm eCompact Plus (18 Seiten) in der Kategorie Zentralheizungskessel. Dieser Bedienungsanleitung war für 31 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/18
Guidebook for installaon, handling and maintenance ENG–
eCompact
Electric block-boiler for heating systems with thermoregulatory microprocessor - IN WALL
FU-eCompact-01/2022
CONTENT
Content
1. Instructions for safe work
1.1 Description of symbols
1.2 Instructions for safe work
2. Device data
2.1. Typology
2.1.1 Statement on compliances
2.1.2 Regular application
2.2 Instructions for mounting
2.3 Instructions for work
2.4 Inhibitors and anti-frost products
2.5 Norms, regulations and standards
2.6 Tools, materials and auxiliary measures
2.7 Minimum distances and burnable construction materials
2.8 Product description
2.9 Waste disposal
2.10 Factory plate
2.11 Dimensions
2.12 Delivery scope
2.13 Technical data
3. Transportation
4. Installation of device
4.1 Be careful prior to assembly
4.2 Distances
4.3 Boiler installation
4.4 Connecting to a hydraulic network
4.5 Connecting to the electric network
4.5.1Connect the external control of the boiler (room thermostat)
4.6 Device Functions
4.6.1 Heating pump air emission and de-blocking
4.6.2 Boiler and installation air emission
4.7 Boiler power selection table
5. Commissioning
5.1 Before commissioning
5.2 First turn on
5.3 Commissioning log
6. Setting the boiler operation
6.1 Symbols that may appear on display
6.2 Warning symbols (codes)
6.3 Error symbols (codes)
6.4 Protection against impermissible pressure and temperature values
6.5 Setting the operating mode
6.6 Description of operating mode
6.7 Setting the heating parameter
6.7.1 Setting the default boiler temperature
6.7.2 Setting the default boiler power
6.8 Room thermostat
6.9 Termination of the work of the heating system
6.10 Switching off the boiler
7. Possible problems, causes and measures to be taken
8. Pump
8.1 Pump Wilo-Para MSL/6-43SC
9. Product data sheet (in accordance with EU regulation no.
811/2013)
1.
Instructions for safe work
1.1
Description of symbols
Warnings
Warnings in text are marked by gray triangle,
background warnings are framed
Electric shock danger is marked by lightning
symbol in warning triangle
The signal words at the beginning of the warning mean the
way and level of consequences if protective measures are not
applied
ï‚· means that smaller material damages may occur NOTE
ï‚· means that smaller to middle injuries may occur CAUTION
ï‚· means that heavy injuries may occur WARNING
ï‚· means that heavy injuries may occur DANGER
Important information
Important information, meaning no danger for
people and things, are marked by the symbol
displayed in the following text. These are limited by
lines, above and below the text.
1.2
Instructions for safe work
General safety instructions
Non-compliance with safety instructions may cause heavy
injuries or lethal outcomes and material damages and –
environment pollution.
ï‚· Electrical installation should be examined by an expert
prior to the device assembly.
ï‚· All electric works should be performed by authorised
person in accordance with corresponding regulations
ï‚· Commissioning and maintenance and repairs should be
done by authorised service only
ï‚· Technical acceptance of installations should be
performed in accordance with corresponding regulations
Danger because of disrespecting security rules in alert
situations, for example fire.
ï‚· Never expose your-self to life danger. Own security
always has priority
Damage occurred because of wrong handling
Wrong handling may lead to injuries of persons and/or
installation damage.
ï‚· Make sure that device is available only toprofessionals
ï‚· Installation and commissioning, and maintenance and
repair, must be done only by service authorised for
electrical works
ï‚· The manufacturer assumes no liability for damage
resulting from improper installation of the unit by the
installer.
Installation and commissioning
ï‚· Placement of device can be done only by authorised
service
ï‚· Boiler can be turned on only if installation is with
corresponding pressure level and working pressure
regular Do not close the safety valves in any way to .
avoid damage caused by excessive pressure. During
the warm-up period, the water on the safety valve of
the hot water circuit and the hot water pipe may leak.
Periodically check the pressure in the heating system.
Ensure that the pressure is always within the values
given in the manual, regardless of whether the device
has elements that protect it from low or high pressure
operation.
ï‚· Install this device only in the room where freezing is not
possible to occur
ï‚· Do not store or dispose inflammable materials or
liquids in the vicinity of this device
ï‚· Keep safe distance in accordance with valid
regulations
ï‚· Never cover the appliance with a fire hazard
ï‚· Never close the device on your own. Always consult an
expert for any changes to the device environment
ï‚· It is recommended to install an additional control
device - room thermostat. It will allow you to maintain a
stable room temperature value and therefore full
comfort in your living space. Using a room thermostat
saves electricity. Energy. Note that increasing the room
temperature for each grade C increases energy
consumption by approximately 7%. Never cover the
room thermostat. The air circulation around it must be
enabled for its operation to be correct. Follow the
installation instructions that came with the room
thermostat
Life threat of electric power shock
ï‚· Secure electric power connecting is done by
authorised service! Comply with connecting scheme
ï‚· Prior to any work: turn off electric power supply. Secure
against accidental turn on
ï‚· Do not mount this device in moist rooms
Control examination / Maintenance
ï‚· Recommendation for user: conclude agreement on
maintenance with authorised service to perform annual
maintenance and controlling examinations
ï‚· User is responsible for safety and environmental
acceptance of the installation
ï‚· Comply with safety work instruction as given in the
chapter Cleaning and Maintenance
Authentic spare parts
There shall not be undertaken any responsibility for
damage occurred due to spare parts not delivered by the
manufacturer
ï‚· Use only original spare parts
Instructions for safe work


Produktspezifikationen

Marke: Mikoterm
Kategorie: Zentralheizungskessel
Modell: eCompact Plus

Brauchst du Hilfe?

Wenn Sie Hilfe mit Mikoterm eCompact Plus benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Zentralheizungskessel Mikoterm

Bedienungsanleitung Zentralheizungskessel

Neueste Bedienungsanleitung für -Kategorien-