Middle Atlantic Products UD1 Bedienungsanleitung

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Middle Atlantic Products UD1 (4 Seiten) in der Kategorie niet gecategoriseerd. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
I-00333 Page 1 Rev -
THANK YOU
Thank you for purchasing the UD1 one rackspace drawer. Please read these instructions
thoroughly before installing/assembling this product.
PRODUCT FEATURES
- Reversible design allows the drawer to be flipped over for use as a slide-out shelf for the
the following applications: writing surface, laptop and keyboard holder.
- Cable knockout at rear of drawer allows for efficient routing of cabling.
SUPPLIED HARDWARE
(2) 10-32 Wing nuts
(4) 6-32 X .25 Self threading screws
(2) 10-32 X .5 Pan head machine screws
(4) #10 X .625 Pan head wood screws
(2) Side mounting brackets (For wood installation)
(2) Rear mount brackets (For use with
Rackrail)
INSTALLATION WITH REAR MOUNTING BRACKETS (USE WITH REAR RAIL)
1) Position drawer in rack before attaching rear mounting brackets.
2) With drawer positioned in the rack, attach the supplied rear mounting brackets to each side as shown
using the supplied hardware. (FIGURE A )
3) Install drawer to the front and rear rackrails
as shown. (FIGURE B)
REAR MOUNTING
BRACKET
WING NUT
PAN HEAD
MACHINE
SCREW
FIGURE A
REAR MOUNTING
BRACKET
FIGURE B
RACKRAIL
SCREW
(sold separately)
Page 2
NOTE: Drawer weight capacity is 50 pounds.
15.5" - 20.5"
INSTALLATION WITH SIDE MOUNTING BRACKETS (USE WITH WOOD RACKS/CASES)
1) Attach the drawer to the front rackrail before attaching the side mounting brackets
2) Attach the side mounting brackets to the drawer and then attach to the sides of the rack
as shown using the supplied hardware. (FIGURE C)
CONVERTING FROM DRAWER TO SHELF AFTER INSTALLATION
1) Open the drawer and simultaneously push the right side quick release latch down and the left side
latch up, and slide the drawer out from the tracks. (FIGURE D)
2) Flip the drawer over and insert onto the tracks. Close the shelf to lock it on the tracks.
QUICK RELEASE LATCH
(BOTH SIDES)
NOTE: The above steps are the same for converting from shelf to drawer.
SIDE MOUNTING
BRACKET
FRONT MOUNTING
BRACKET
PAN HEAD
WOOD SCREW
FIGURE C
FIGURE D
ATTACH TO FRONT
RACKRAIL
Page 3
SELF THREADING
SCREW (DO NOT
OVERTIGHTEN)
SIDE MOUNTING
BRACKET

Produktspezifikationen

Marke: Middle Atlantic Products
Kategorie: niet gecategoriseerd
Modell: UD1

Brauchst du Hilfe?

Wenn Sie Hilfe mit Middle Atlantic Products UD1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung niet gecategoriseerd Middle Atlantic Products

Bedienungsanleitung niet gecategoriseerd

Neueste Bedienungsanleitung für -Kategorien-