Middle Atlantic Products RK-GD16 Bedienungsanleitung

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Middle Atlantic Products RK-GD16 (4 Seiten) in der Kategorie niet gecategoriseerd. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
I-00189 Rev D
Thank you for purchasing the RK-GDXX Glass Door. Please read these instructions thoroughly
before installing this product.
PRODUCT FEATURES
THANK YOU
- Locking door provides security
- Smoked, tempered glass provides a clean look
Page 2
# 2 Phillips Head Screwdriver or Power Driver with Bit
Door
(QTY -1)
BEFORE BEGINNING INSTALLATION
1) Move the rackrail to the recessed set of enclosure mounting holes using existing wood screws.
NOTE: When moving front rackrail to setback position, mount rail to recessed pilot holes on opposite
end of side panel. This hides the original mounting holes from view.
RACKRAIL
WOOD
SCREW
HARDWARE/ITEMS SUPPLIED
TOOLS REQUIRED
Self-Adhesive Hinge Plate
Hinge
Pivot Bushing (.347” O.D.)
Pivot Bushing (.313 O.D.)
5/8" Pan Head Wood Screw
Stop Pin
Locking Bracket
Magnet
QTY DESCRIPTION
2
2
2
2
2
2
1
1
Page 3
1) Determine desired hinge side and install
pivot bushings in top and bottom of rack.
(FIGURE A)
NOTE: Two bushing sizes are provided.
Use appropriate size bushing for your rack.
2) Remove adhesive backing and install both
hinge plates on inside of glass door. (FIGURE B)
LOCKING
BRACKET
WOOD SCREWS
(2) PAN HEAD
MAGNET
INSTALLATION
TOP HINGE
FIGURE A
HINGE
PLATES (2)
FIGURE C FIGURE D
FIGURE E
PIVOT
BUSHING
(TOP)
HINGE
PIVOT
BUSHING
(BOTTOM)
HINGE
PLATE
BOTTOM
HINGE
SCREWS (2)
FIGURE B
3) Slide bottom hinge against door and adjust so that hinge is flush with edge of door.
(FIGURE C, FIGURE D)
4) Tighten (2) screws to secure bottom hinge to hinge plate. (FIGURE C)
NOTE: Do not over tighten.
5) Pivot door into bottom pivot bushing. (FIGURE C)
6) Insert upper hinge into top pivot bushing and hold hinge in place with hand.
(FIGURE A)
7) Slide door into top hinge and adjust position of door, so that
hinge is flush with edge of door. (FIGURE D)
8) Tighten (2) screws to secure upper hinge to hinge plate.
: Do not over tighten.NOTE
9) If neccessary, adjust hinges to balance door opening gaps.
10) Attach locking bracket opposite hinge side with (2) wood
screws provided. Install magnet as shown. (FIGURE E)
PIVOT
BUSHING
(BOTTOM)
FLUSH
EDGE

Produktspezifikationen

Marke: Middle Atlantic Products
Kategorie: niet gecategoriseerd
Modell: RK-GD16

Brauchst du Hilfe?

Wenn Sie Hilfe mit Middle Atlantic Products RK-GD16 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung niet gecategoriseerd Middle Atlantic Products

Bedienungsanleitung niet gecategoriseerd

Neueste Bedienungsanleitung für -Kategorien-