Middle Atlantic Products ICOMP-COOL50 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Middle Atlantic Products ICOMP-COOL50 (6 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/6
I-00522 Rev A
PRODUCT FEATURES
- Powerful, yet quiet way to remove heat from electronic components on open shelving or racks.
- Blowers exhaust 50 CFM of hot air while providing high static pressure to maintain airflow.
- (I)COMP-COOL50 is ideal for cooling one component when no others need to be stacked on top of it.
- (I)COMP-COOL50P is ideal for cooling one component when stacking others on top.
Thank you for purchasing the (I)COMP-COOL50/(I)COMP-COOL50P Component Coolers.
Please read these instructions thoroughly before installing/operating this product.
(I)COMP-COOL50
(I)COMP-COOL50P
(C)
(D)
(B)
(G)
(A)
(F)
(I)COMP-COOL50 FRONT VIEW
(I)COMP-COOL50P REAR VIEW
COMPONENT COOLER BOTTOM VIEW
(I)COMP-COOL50/(I)COMP-COOL50P BLOWER CALLOUTS
(E)
Page 2
A) CONTROL CIRCUIT WITH ON-BOARD TEMPERATURE SENSOR: DO NOT BLOCK!
B) TURN ON TEMPERATURE: The blower will turn on at 87° F (30.5° C) and run proportionately (speed
increases with temperature) from 87° F (30.5° C) to 95° F (35° C). At 95° F and above, the blower
will run at full speed. The blower will stop running at 85° F (29.4° C).
C) PRODUCT REVISION LEVEL: Current revision level of your (I)COMP-COOL50/(I)COMP-COOL50P.
D) MANUFACTURING DATE CODE: Denotes the date the (I)COMP-COOL50/(I)COMP-COOL50P was
manufactured.
E) POWER CONNECTOR: Connects to the provided power supply.
F) POWER LED: Blue LED that illuminates when the unit is receiving power, both
(I)COMP-COOL50/(I)COMP-COOL50P models.
G) (I)COMP-COOL50P POWER INLET: Connects to the provided power supply.
PARTS LIST
1 - (I)COMP-COOL50
1 - 12V 1A POWER SUPPLY
1 - ALCOHOL WIPE
5 - WIRE TIES
5 - WIRE TIE SADDLES
1) Locate the hot-spot on your component. (FIGURE A)
NOTE: The (I)COMP-COOL50 can be positioned in any direction to remove the hot air.
2) Position the (I)COMP-COOL50 in the desired location,
and place it on the hot-spot. (FIGURE B)
- Aim toward desired opening in the rack to exhaust
hot air.
- Aim toward source of forced ventilation.
3) Connect the unit’s power source cable to the provided
power supply.
- Wire ties and wire tie saddles are provided for cable
management.
INSTALLATION
(I)COMP-COOL50
Page 3
FIGURE A
FIGURE B
For Best Thermal Management Practices Please Visit
http://www.middleatlantic.com/pdf/ThermalManagement.pdf


Produktspezifikationen

Marke: Middle Atlantic Products
Kategorie: Nicht kategorisiert
Modell: ICOMP-COOL50

Brauchst du Hilfe?

Wenn Sie Hilfe mit Middle Atlantic Products ICOMP-COOL50 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Middle Atlantic Products

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-