Microlab MD312 Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Microlab MD312 (4 Seiten) in der Kategorie KFZ-Halterung. Dieser Bedienungsanleitung war fĂĽr 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
Prior to initial use, please read the manual carefully
Multimedia Speaker System
All other brand and product names are trademarks of their respective holders. Actual contents may differ slightly from those shown in print. All
specifications and designs are subjected to changes without any prior notice.
MD312
User Manual
www.microlab.cn
Microlab Electronics Co.,Ltd
Made in China
Th e ® work mark a nd l o gos ar e re g istered t ra demarks own ed by B luet oo t h SIG, Inc. and a ny u se of such ma rks byBl u et oo th
Mi c rolab El ect ro ni cs Co., L td is und er lic e nse. Other tradem a rks and tr ade n ames a r e those of t h eir re sp ect ive own er s.
80-MD312-97-0001-01 2012-04-09 (changed to power adapter)
1
English 2
FrequentlyAskedQuestions (FAQ)
FrequentlyAskedQuestions Answers
Check if the system is powered on or battery is
replaced with fresh BL-5C type
Please perform an initial charge of 4 hours prior
to initial use.
Check if the audio source is properly paired and
connected. Secondly check if the 3.5mm stereo plug
is correctly inserted for AUX mode.
Ensure volume is correctly set
What are the products
supported?
Where to place this speaker
If the problem still exists, please contact the distributor or ask for professional service
Check if the volume is at lower level and the Mp3
format is recorded at above 196 bitrate
Please check the audio source distance, try to place
it nearer to the speaker system.
Intermittent sound
LED do not light up
No Sound
Sound is distorted
It is magnetically shielded so can be placed
near LCD TV Monitor without any distortion
Any Bluetooth enabled music devices and playback
devices such as PC, Media players with 3.5mm
stereo plug.
How to charge the system? Simply connect the system to the supplied Charging
adapter. After charged the LED will turned off.
EN
6
TechnicalInformation
© 2012 Microlab Electronics Co., Ltd All rights reserved.
- The end -
AMPLIFIER
Total Power: 4 Watt RMS
Power distribution: 1.25 Watt x 2 + 1.5 Watt
Harmonic distortion: < 5% 1 W 1 kHz
Frequency response: 40 Hz - 18 kHz
Signal/Noise ratio: > 65 dB
Separation: > 45 dB
Speakers
Tweeter type: 2” x 2
Tweeter rated power: 2 Watt 4 Ohm
Woofer type: 3”
Woofer rated power: 5 Watt 2 Ohm
Interfaces
Output: NIL
Input: 3.5mm stereo jack, mini- USB charging port
Wireless: Bluetooth 2.1 + EDR, and A2DP
80-MD312-97-0001-01 2012-04-09 (changed to power adapter)
2. BT Pairing ON (manually)
Depress for 3 secs, pairing mode
sequence will commence. If
prompted for security code,
please key in “0000”.
Once turned on, after 3 seconds the system will search for previous paired devices for 20
seconds with its LED blinking slowly. After 20 seconds if no paired devices are found, it will
commence new pairing sequence automatically. It will start the pairing sequence for 3
minutes before returning to the initial sequence of locating previously paired device.
Blue LED blink rapidly
Pairing with Bluetooth music devices. Once paired, Bluetooth LED will blink for 2
seconds once about every 5 to 6 seconds interval. (skip this step if both MD312
and music device had saved this profile before)
iPhone, iPad or iPod
go to SETTINGS > GENERAL > enable BLUETOOTH > select MD312
Android Phone
go to SETTINGS > WIRELESS & NETWORKS > enable BLUETOOTH > select
MD312
Others
read the instruction manual included with your BT music device > enable
BLUETOOTH > select MD312.
Pai red successfull y
wi ll blin k twi ce
in 5 t o 6 seconds in terval s
MD312 MD312
MD312 MD312
Pa ir ed
an d
Caution:
To reduce the risk of electric shock, do not dismantle the product and do not expose the apparatus to rain or moisture. No
user-serviceable parts inside. Refer servicing to qualified personnel only.
Explanationof Graphical Symbols:
The lightning flash within an equilateral triangle is intended to alert you to the presence of uninsulated dangerous voltage
within the product's enclosure that may be of sufficient magnitude to constitute an electric shock to a person or persons.
The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the product.
Important Safety Instructions
WARNINGS:
1. Read Instructions - All the safety and operating instructions must be read before the product is operated.
2. Retain Instructions - The safety and operating instructions should be kept with the product for future
reference.
3. Heed warnings - All warnings on the product and in the operating instructions should be adhered to.
4. Follow instructions - All operating and users instructions should be followed.
5. Installation - Install in accordance with the manufacturer's instructions.
6. Power sources - This product should be operated only from the type of power source indicated by the
marking adjacent to the power cord entry. If you are not sure of the type of power supply to your home,
consult your product dealer or local power company.
7. Grounding or polarization - the product is not required to be grounded. Ensure the plug is fully
inserted into the wall outlet or extension cord receptacle to prevent blade or pin exposure. Some
versions of the product are equipped with a power cord fitted with a polarized alternating line plug (a
plug having one blade wide than the other). This plug will fit onto the power outlet only one way. This
is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the
plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug. When using an extension power-supply cord or a power-supply cord
other than that supplied with the appliance, it should be fitted with the appropriate molded plugs and carry
safety approval appropriate to the country of use.
8. Power cord protection - Power-supply cords should be routed so that they are not likely to be walked on,
kinked or pinched by items placed on or against them, paying particular attention to cords from plugs,
receptacles and the point where they exit from the appliance.
9. Overloading - Do not overload wall outlets, extension cords or multiple sockets, as this can result in a risk of
fire or electric shock.
10. Ventilation - The product must be properly ventilated. Do not place the product on a bed, sofa, or other similar
surface. Do not cover the product with any items such as tablecloths, newspapers, etc.
11. Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves, or
other products including amplifiers that produce heat. No naked flame sources, such as lighted candles,
should be placed on the apparatus.
12. Water and moisture - To reduce the risk of fire or electric shock, do not expose the product to train, dripping,
splashing or excessive moisture such as in a sauna or bathroom. Do not use this product near water, for
example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool,
or etc.
13. Object and Liquid Entry - Never push objects of any kind into this product through openings, as they may
touch dangerous voltage points or short-circuit parts that could result in a fire or electric shock. Never spill
liquid of any kind on the product. Do not place any object containing liquid on top of the product.
14. Cleaning - Unplug the product from the wall outlet before cleaning. The cabinet of the subwoofer may be
cleaned by dusting with a dry cloth. If you wish to use an aerosol cleaning spray, do not spray directly on the
cabinet; spray onto the cloth. Be careful not to damage the drive units.
15. Attachments - Do not use attachments not recommended by the product manufacturers, as they may cause
hazards.
EN
2
Operation
EN
5
1. Power on
3. BT Pairing with BT audio device
4. BT playback
Once connected, you can commence the music playback either on the mobile phone, tablet or notebook, etc.
The sound will be transferred wirelessly to the MD312 system directly. During streaming,the LED will blink
once for 2 seconds duration in 5 seconds intervals.
Depress the + or - buttons for volume adjustments. The LED will illuminate in green steadily once depress.
To mute the playback,depress the Mute button and the LED will illuminate in green constantly till it isdepress
again to deactivate.
5. AUX IN mode
Connect the 3.5 mm stereo source to the AUX IN jack.
This will immediately disconnect the Bluetooth mode if it is on.
Commence your media player via the 3.5 mm stereo connection.
6. Battery charging (Lithium battery type: BL-5C)
Connect the charging adapter to mini-USB port of the speaker . Ensure the speaker system is turned off for
charge. The system will commence its auto charging mode. The LED will illuminate in bright red colour. Once
fully-charged,it will be turn dim red. Please initial charge the system for 4 hours prior to first.
80-MD312-97-0001-01 2012-04-09 (changed to power adapter)


Produktspezifikationen

Marke: Microlab
Kategorie: KFZ-Halterung
Modell: MD312
WLAN: Nein
Bluetooth: Ja
Bluetooth-Version: 2.1+EDR
Bluetooth-Profile: A2DP
Akku-/Batteriebetriebsdauer: 6 h
Breite: 175 mm
Tiefe: 109 mm
Gewicht: 1000 g
AC-Netzadapter: Ja
Mitgelieferte Kabel: Audio (3,5 mm)
Produkttyp: 2.1 Tragbares Lautsprechersystem
Empfohlene Nutzung: Universal
Produktfarbe: WeiĂź
3,5-mm-Anschluss: Ja
Ăśbertragungstechnik: Verkabelt & Kabellos
Impedanz: 4 Ohm
Akku-/Batterietechnologie: Lithium
Höhe: 178 mm
Energiequelle: Battery, USB
RMS-Leistung: 4 W
Eingebautes Display: Nein
AUX-Eingang: Ja
Lautstärkeregler: Digital
Verpackungsbreite: 250 mm
Verpackungstiefe: 442 mm
Verpackungshöhe: 488 mm
Paketgewicht: 1400 g
Betriebsanleitung: Ja
Gehäusematerial: Kunststoff
Anzahl der Lautsprecher: 1
LED-Anzeigen: Ja
Audio Kanäle: 2.1 Kanäle
THD, totalklirren: 5 %
Anzahl unterstĂĽtzter Akkus/Batterien: 1
Anzahl des Antriebs: 3
Frequenzbereich: 40 - 18 Hz
USB-Ladeport: Ja
Ein-/Ausschalter: Ja
Laden per USB: Ja
Hochtöner: Ja
Externes Netzteil: Ja
Akkus/Batterien enthalten: Ja
Hochtönerdurchmesser: 50.8 mm
Verstärker: Eingebaut
Empfindlichkeit: 65 dB
Kanaltrennung: 45 dB
Lautsprechertyp: 2-Wege
Tieftönerdurchmesser: 76.2 mm

Brauchst du Hilfe?

Wenn Sie Hilfe mit Microlab MD312 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung KFZ-Halterung Microlab

Bedienungsanleitung KFZ-Halterung

Neueste Bedienungsanleitung fĂĽr -Kategorien-