Microlab FC 362W Bedienungsanleitung

Microlab Lautsprecher FC 362W

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Microlab FC 362W (12 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/12

FC-362W

User Manual

FineCone Speakers

Before using, please read the manual carefully

www.microlab.com

www.microlab.cn

Microlab Electronics Company Limited

Made in China

All symbols and logo belong to the respective brand holder or registered holder. All specifications and information are subject to changes without

further notice. Slight variations and differences might appear between the printed photos and actual product due to product enhancement.

Important Safety Instructions

Important Safety InstructionsImportant Safety Instructions

Caution:

Caution:Caution:

To reduce the risk of electric shock, do not dismantle the product and do not expose the apparatus to rain

or moisture. No user-serviceable parts inside. Refer servicing to qualiﬁed personnel only.

Explanation of Graphical Symbols:

Explanation of Graphical Symbols:Explanation of Graphical Symbols:

The lightning ﬂash within an equilateral triangle is intended to alert you to the presence of

uninsulated “dangerous voltage” within the product's enclosure that may be of suﬃcient magnitude

to constitute an electric shock to a person or persons.

The exclamation point within an equilateral triangle is intended to alert you to the presence of

important operating and maintenance (servicing) instructions in the literature accompanying the

product.

WWarnings:

arnings:

arnings:arnings:

1. Read Instructions All the safety and operating instructions must be read before the product is -

operated.

2. Retain Instructions - The safety and operating instructions should be kept for future reference.

3. Heed warnings - All warnings on the product and in the operating instructions should be adhered to.

4. Follow instructions - All operating and use instructions should be followed.5. Installation － Install in

accordance with the manufacturer's instructions.

6. Power sources - This product should be operated only from the type of power source indicated by the

marking adjacent to the power cord entry. If you are not sure of the type of power supply to your home,

consult your product dealer or local power company.

7. Grounding or polarization the product is not required to be grounded. Ensure the plug is fully -

inserted into the wall outlet or extension cord receptacle to prevent blade or pin exposure. Some versions

of the product are equipped with a power cord ﬁtted with a polarized alternating line plug (a plug having

one blade wide than the other). This plug will ﬁt onto the power outlet only one way. This is a safety

feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still

fail to ﬁt, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the

polarized plug. When using an extension power-supply cord or a power-supply cord other than that

supplied with the appliance, it should be ﬁtted with the appropriate molded plugs and carry safety

approval appropriate to the country of use.

8. Power cord protection - Power supply cords should be routed so that they are not likely to be walked

on, kinked or pinched by items placed on or against them, paying particular attention to cords from plugs,

receptacles and the point where they exit from the appliance.

9. Overloading - Do not overload wall outlets, extension cords or multiple sockets, as this can result in a

risk of ﬁre or electric shock.

10. Ventilation The product must be properly ventilated. Do not place the product on a bed, sofa, or -

other similar surface. Do not cover the product with any items such as tablecloths, newspapers, etc.

11. Heat The product should be situated away from heat sources such as radiators, heat registers, -

stoves, or other products) including ampliﬁers that produce heat. No naked ﬂame sources, such as

lighted candles, should be placed on the apparatus.

12. Water and moisture - To reduce the risk of ﬁre or electric shock, do not expose the product to train,

dripping, splashing or excessive moisture such as in a sauna or bathroom. Do not use this product near

water - for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a

swimming pool and the like.

13. Object and Liquid Entry - Never push objects of any kind into this product through openings, as they

may touch dangerous voltage points or short-circuit parts that could result in a ﬁre or electric shock.

Never spill liquid of any kind on the product. Do not place any object containing liquid on top of the

product.

14. Cleaning Unplug the product from the wall outlet before cleaning. The cabinet of the subwoofer -

may be cleaned by dusting with a dry cloth. If you wish to use an aerosol cleaning spray, do not spray

directly on the cabinet; spray onto the cloth. Be careful not to damage the drive units.

English 2

Deutsch 7

Русский 11

Polska 14

15. Attachments - Do not use attachments not recommended by the product manufactures, as they may

cause hazards.

16. Accessories Do not place this product on an unstable cart, stand, tripod, bracket or table. The -

product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only

with a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. Any

mounting of the product should follow the manufacturer's instructions and should use a mounting

accessory recommended by the manufacturer.

17. Moving the product A product and cart combination should be moved with care. Quick stops, -

excessive force and uneven surfaces may cause the product and cart combination to overturn.

18. Unused periods The power cord of the appliance should be unplugged from the outlet during -

lightning storms or when the apparatus is left unused for a long period of time.

19. Servicing Do not attempt to service this product yourself, as opening or removing covers may -

expose you to dangerous voltage or other hazards. Refer all servicing to qualiﬁed service personnel.

20. Please remove the power plug form the main power source or wall power source when not in use.

When plugged in to a power source, the system is in standby mode, so the power is not entirely cut oﬀ.

21. Replacement parts - When replacement parts are required, ensure the service technician has used

replacement parts speciﬁed by the manufacturer or have the same characteristics as the original part.

Unauthorized substitutions may result in ﬁre, electric shock or other hazards.

22. Mains fuses For continued protection against ﬁre hazard, use fuses only of the correct type and -

rating. The correct fuse speciﬁcation for each voltage range is marked on the product.

23. Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If

you do, the speaker may be damaged when a peak level section is suddenly played.

24. The only means of completely disconnecting the product from the power supply is by removing the

power cord from the wall outlet or the product. The wall outlet or the power cord entry to the product must

remain freely accessible at all times while the product is in use.

25. Try to install the product near a wall socket or extension cord and shall be easily accessible.

26. The highest environmental temperature suitable for this product is 40 C.°

3Introduction

Introduction

IntroductionIntroduction

Beautifully crafted, the all new FC362W lets you listen to songs from your personal

computer or notebook without cable. Select your input choices or adjust the audio levels

with our infrared remote control with ease.

Using state of the art 2.4 GHz technology for clear audio deﬁnition and clarity, FHSS

technology to allow wider availability bandwidth.

This wireless design follows strict discipline in speaker designs to achieve perfect linear

frequency response curve with V16 Finecone drivers. Comes with 2.4GHz ISM wireless

technology.

Features

FeaturesFeatures

2.1 subwoofer system with full range acoustic production and tower satellites eAirbass design,

Microlab own proprietory technology - Bass with natural depth and range 6.5" subwoofer system for deep

vocal and bass eﬀects.

All magnetically shielded Driver designed by Denmark acoustic expert, Peter Larsen V16 FineCone

technology

Ampliﬁer unit with 2.4GHz wireless technology Source transmission via 2.4GHz USB dongle

Packing list

Packing listPacking list

You should ﬁnd following items while unpacking:

Illustrations

IllustrationsIllustrations

Front

1. Power LED: illuminates in green when

power is turn on

2. Master volume knob: adjust volume level

3. Earphone output jack: allows 3 5mm.

stereo plug connection for earphones

4. Audio source input jack: allows 3 5mm.

stereo plug for connection to media

player source such as computer sound

card, CD / DVD, Mp3 / Mp4 player, etc.

view Back view

1. Bass volume knob: allows bass volume

adjustment on the subwoofer.

2. Input 1: 2 x RCA jacks for input source

connection from any media sources such

as CD / DVD, Mp3 / Mp4 player or TV.

3. Output connections: connect to left and

right satellites, and subwoofer.

4. Fuse: fuse socket

5. Power line: AC power source input

Product connection and operation

Product connection and operationProduct connection and operation

Connections

ConnectionsConnections

1. Connect the left speaker to the main / right speaker binding post interfaces. Use the provided

interconnect speaker cable and lock between both binding posts with the bare copper wires.

For alternative pure distortion free connection, you can use third party “ ” banana plugs to connect.

2. Place both bookshelf speakers on extreme sides of the listening position.

3. Connect the playback device to the rear PC or AUX input interfaces of the right speaker.

Use the included 2RCA to 3 5mm. stereo cable.

4. The main / right speaker should be placed near a power source and near the playback device

such as CD DVD/ , Mp3 Mp4/ player or TV.

5. Last, connect the AC power cable at the rear of the main / right speaker to the AC power supply

source. Please ensure t he AC power supply match the power requirement printed at the rear

panel.

Operation

OperationOperation

1. Ensure the master volume is at the lowest setting.

2. Turn on the main AC power and switch at the rear of the main speaker.

3. Start the playback device and song.

4. Slowly adjust the volume to your preferred volume level and enjoy. Note that the volume knob

can be turn for level adjustment and toggle for input source change.

5. To change the input source, depress on the volume knob to change from PC input to AUX input

or vice versa. The red LED indicates PC source and when it turns orange, it will indicate AUX

source input.

6. For remote control, simply point directly at the ampliﬁer unit and depress the button of choice on it.

7. For 2 4GHz. wireless operation,

a Connect. the 2 4GHz . USB dongle to the notebook or desktop Windows. ® operating system will

Fc362 subwoofer

Fc362 satellites pcs 2

Fc362 ampliﬁer 1pc

3 5mm stereo 2RCA cable pc. - 1

Interconnect speaker cable 2 5m 1pc , .

2 4GHz USB dongle 1pc.

Infrared remote control 1pc

User manual 1pc

1pc

Front View Back viewTop view

4 3

1 / 2

VOLUME / SEL

Power

button

Heat vent -

do not block

ve n til at i o n

Produktspezifikationen

Marke:	Microlab
Kategorie:	Lautsprecher
Modell:	FC 362W
Gewicht:	5300 g
Empfohlene Nutzung:	Universal
Produktfarbe:	Schwarz
Übertragungstechnik:	Kabelgebunden
Energiequelle:	AC
RMS-Leistung:	54 W
Gehäusematerial:	MDF, Plastic
Audio Kanäle:	2.1 Kanäle
THD, totalklirren:	0.3 %
Rauschverhältnis (SNR):	75 dB
Frequenzbereich:	35 - 20000 Hz
Ein-/Ausschalter:	Ja
Fernbedienung:	Ja
Subwoofer-Treiberdurchmesser (imperial):	6.5 "
Fernbedienungstyp:	RF
Kanaltrennung:	45 dB
Subwoofer-Typ:	Passiver Subwoofer
Subwoofer Effektivwert Energie:	24 W
Satelliten Effektivwert Energie:	30 W
Anzahl der Satelliten:	2
Satellite Lautsprecher Abmessungen (WxDxH):	96 x 263 x 110 mm
Verstärkungsgerät enthalten:	Ja
Subwoofer Abmessungen (WxDxH):	255 x 255 x 287 mm
Satellite Lautsprecher type:	2,5-Wege
Gerätegewicht:	5300 g
Verstärkungsgerät Formfaktor:	Stand-alone
Verstärkung Gerätetyp:	Verstärker
Verstärker Abmessungen (W x D x H):	75 x 200 x 200 mm
Bassoptimierung:	Ja
Lautsprecherleistung:	15 W