Microchip SY58013U Bedienungsanleitung

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Microchip SY58013U (10 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 25 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/10
1
M9999-063010
hbwhelp@micrel.com or (408) 955-1690
6GHz, 1:2 FANOUT BUFFER/TRANSLATOR
w/400mV LVPECL OUTPUTS and INTERNAL
INPUT TERMINATION
Precision Edge®
SY58013U
Rev.: F Amendment: /0
Issue Date: November 2011
DESCRIPTION
Precision 1:2, 400mV LVPECL fanout buffer
Low jitter performance:
55fsRMS phase jitter (typ)
Accepts an input signal as low as 100mV
Guaranteed AC performance over temperature and
voltage:
> 6GHz fMAX clock
< 80ps tr/tf times
< 250ps tpd
< 15ps max. skew
Unique input termination and VT pin accepts
DC-coupled and AC-coupled differential
inputs: LVPECL, LVDS and CML
400mV LVPECL compatible outputs
Power supply 2.5V ±5% and 3.3V ±10%
–40°C to +85°C temperature range
Available in 16-pin (3mm x 3mm) QFN package
FEATURES
APPLICATIONS
All SONET and All GigE clock distribution
Fibre Channel clock and data distribution
Backplanes
Data distribution: OC-48, OC-48+FEC, XAUI
High-end, low-skew, multiprocessor synchronous
clock distribution
The SY58013U is a 2.5V/3.3V precision, high-speed, fully
differential 1:2 LVPECL fanout buffer. Optimized to provide
two identical output copies with less than 15ps of skew and
only 55fsRMS phase jitter, the SY58013U can process clock
signals as fast as 6GHz or data patterns up to 10.7Gbps.
The differential input includes Micrel’s unique, 3-pin input
termination architecture that interfaces to LVPECL, LVDS,
and CML differential signals, (AC- or DC-coupled) as small
as 100mV without any level-shifting or termination resistor
networks in the signal path. For AC-coupled input interface
applications, an on-board output reference voltage (VREF-
AC) is provided to bias the VT pin. The outputs are 400mV
LVPECL compatible, with extremely fast rise/fall times
guaranteed to be less than 80ps.
The SY58013U operates from a 2.5V ±5% supply or
3.3V ±10% supply and is guaranteed over the full industrial
temperature range (–40°C to +85°C). For applications that
require greater output swing or CML compatible outputs,
consider the SY58012U 1:2 fanout buffer with 800mV
LVPECL outputs, or the SY58011U 1:2 fanout buffer with
400mV CML outputs. The SY58013U is part of Micrel’s
high-speed, Precision Edge® product line. Datasheets and
support documentation can be found on Micrel’s web site at
www.micrel.com.
FUNCTIONAL BLOCK DIAGRAM TYPICAL PERFORMANCE
2GHz with 100mV Input
Precision Edge®
Precison Edge is a registered trademark of Micrel, Inc.
2
Precision Edge®
SY58013U
Micrel, Inc.
M9999-063010
hbwhelp@micrel.com or (408) 955-1690
PACKAGE/ORDERING INFORMATION
Pin Number Pin Name Pin Function
1, 4 IN, /IN Differential Input: This input pair is the signal to be buffered. Each pin is internally
terminated with 50 ohms to the VT pin. Note that this input will default to an indeterminate
state if left open. See “Input Interface Applications” section.
2 VT Input Termination Center-Tap: Each input terminates to this pin. The V T pin provides a
   center-tapforeachinput(IN,/IN)toaterminationnetworkformaximuminterfaceexibility.
See “Input Interface Applications” section.
3 VREF-AC Reference Output Voltage: This output biases to V
CC –1.2V. It is used for AC-coupled
inputs (IN, /IN). Connect VREF-AC directly to the VT pin. Bypass with 0.01µF low ESR
capacitor to VCC. Maximum curent source or sink is 0.5mA. See “Input Interface
Applications” section.
5, 8, 13, 16 VCC Positive Power Supply: Bypass with 0.1µF//0.01µF low ESR capacitors as close to the
VCC pins as possible.
6, 7, 14, 15 GND, Ground. Exposed pad must be connected to a ground plane that is the same potential
(Exposed Pad) as the ground pin.
12, 11 Q0, /Q0, LVPECL Differential Output Pairs: Differential buffered output copy of the input signal. The
9,10 Q1,/Q1 outputswingistypically400mV.Unusedoutputpairsmaybeleftoatingwithnoimpacton
jitter. SeeLVPECL Output Termination” section.
PIN DESCRIPTION
16-Pin QFN
Ordering Information(1)
Package Operating Package
Part Number Type Range Marking
SY58013UMG(3) QFN-16 Industrial 013U with
Pb-Free Pb-Free bar-line indicator
SY58013UMGTR(2, 3) QFN-16 Industrial 013U with
Pb-Free Pb-Free bar-line indicator
Notes:
1. Contact factory for die availability. Dice are guaranteed at T
A = 25°C, DC electricals only.
All devices are Pb-Free.
2. Tape and Reel.
3. Pb-Free package recommended for new designs.
3
Precision Edge®
SY58013U
Micrel, Inc.
M9999-063010
hbwhelp@micrel.com or (408) 955-1690
Absolute Maximum Ratings(Note 1)
Power Supply Voltage (V CC ) ........................–0.5V to+4.0V
Input Voltage (VIN) ...........................................–0.5V to V
CC
Output Current (IOUT)
Continuous ............................................................. 50mA
Surge .................................................................... 100mA
VT
Current
Source or sink current on VT pin......................... ±100mA
Input Current
Source or sink current on (IN, /IN) ........................ ±50mA
VREF Current
Source or sink current on VREF-AC, ........ ±1.5mANote 4
Soldering, (20 sec.) ................................................... 26C
Storage Temperature Range (T STORE ) ........ –65 to +150°C
Operating Ratings(Note 2)
Power Supply Voltage (VCC) ................. +2.375V to +3.60V
Operating Temperature Range (TA) ............ –40°C to +85°C
Package Thermal Resistance, Note 3
QFN(θJA)
Still-Air .............................................................................60°C/W
500lpfm ...........................................................................54°C/W
QFN(ψJB) .........................................................................33°C/W
TA= –40°C to +85°C
Symbol Parameter Condition Min Typ Max Units
VCC Power Supply Voltage 2.375 3.60 V
ICC Power Supply Current Max. VCC, no load 75 90 mA
VIH
Input HIGH Voltage IN, /IN, Note 6 V
CC–1.6 VCC V
VIL
Input LOW Voltage IN, /IN 0 VIH0.1 V
VIN
Input Voltage Swing IN, /IN; see Figure 1a 0.1 1.7 V
VDIFF_IN Differential Input Voltage IN, /IN; see Figure 1b 0.2 V
RIN
In to VT Resistance 40 50 60 ohms
VREF
-AC Output Reference Voltage VCC –1.3
VCC –1.2
VCC –1.1 V
IN to VT 1.28 V
DC ELECTRICAL CHARACTERISTICS(Note 5)
VCC = 3.3V ±10% or VCC = 2.5 ±5%; RL= 50ohms to VCC–2V; TA= –40°C to 85°C, unless otherwise stated.
Symbol Parameter Condition Min Typ Max Units
VOH
Output HIGH Voltage Q0, /Q0, Q1, /Q1 VCC–1.145 VCC–1.020 VCC –0.895 V
VOL
Output LOW Voltage Q0, /Q0, Q1, /Q1 V
CC–1.545 VCC–1.420 VCC –1.295 V
VOUT
Output Voltage Swing Q0, /Q0, Q1, /Q1; see Figure 1a 200 400 mV
VDIFF_OUT Differential Output Voltage Swing Q0, /Q0, Q1, /Q1; see Figure 1b 400 800 mV
Note 1. Permanent device damage may occur if absolute maximum ratings are exceeded. This is a stress rating only and functional operation is not
implied at conditions other than those detailed in the operational sections of this data sheet. Exposure to absolute maximum ratings condi-
tions for extended periods may affect device reliability.
Note 2. The data sheet limits are not guaranteed if the device is operated beyond the operating ratings.
Note 3. Thermal performance assumes exposed pad is soldered (or equivalent) to the device’s most negative potential on the PCB.
Note 4. Due to the limited drive capability, use for input of the same package only.
Note 5. ThecircuitisdesignedtomeettheDCspecicationsshownintheabovetableafterthermalequilibriumhasbeenestablished.
Note 6. VIH (min) not lower than 1.2V.
LVPECL DC ELECTRICAL CHARACTERISTICS(Note 5)

Produktspezifikationen

Marke: Microchip
Kategorie: Nicht kategorisiert
Modell: SY58013U

Brauchst du Hilfe?

Wenn Sie Hilfe mit Microchip SY58013U benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Microchip

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-