Microchip MIC5370 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Microchip MIC5370 (13 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/13
MIC5370/1
High-Performance Dual 150mA LDO
1.6mm x 1.6mm Thin MLF®
MLF and MicroLeadFrame are registered trademarks of Amkor Technology, Inc.
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 ( 408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
May 2011 M9999-052011-C
General Description
The MIC5370/1 is an advanced dual LDO ideal for
powering general purpose portable devices. The
MIC5370/1 provides two independently-controlled, high-
performance 150mA LDOs in a tiny 1.6mm x 1.6mm Thin
MLF® package.
Ideal for battery-powered applications, the MIC5370/1
offers 2% initial accuracy, low dropout voltage (155mV @
150mA) and low ground current (typically 32μA per LDO).
The MIC5370/1 can also be put into a zero-off-mode
current state, drawing virtually no current when disabled.
When the MIC5371 is disabled an internal resistive load is
automatically applied to the output to discharge the output
capacitor. This LDO offers fast transient response and
high PSRR while consuming a minimum operating current.
The MIC5370/1 is available in fixed output voltages in a
lead-free (RoHS-compliant) 6-pin 1.6mm x 1.6mm Thin
MLF® package.
Data sheets and support documentation can be found on
Micrel’s web site at: www.micrel.com.
Features
• 2.5V to 5.5V input voltage range
• Two 150mA output current LDOs
• High output accuracy
– ±2% initial accuracy
• Low quiescent current – 32µA per LDO
• Stable with 1µF ceramic output capacitors
• Independent enable pins
• Low dropout voltage – 155mV at 150mA
• Thermal-shutdown protection
• Current-limit protection
• Output discharge circuit – MIC5371
• 6-pin 1.6mm x 1.6mm Thin MLF ® package
Applications
• Camera phones
• Mobile phones
• GPS, PMP, PDAs and handhelds
• Portable electronics
___________________________________________________________________________________________________________
Typical Application
MIC5370/1-xxYMT
VIN
EN1
EN2 1µF
1µF
VOUT1
VOUT2
1µF
VBAT
GND
I/O
VCORE
Camera DSP Power Supply Circuit
Micrel, Inc. MIC5370/1
May 2011 2 M9999-052011-C
Block Diagrams
VIN
EN1
GND
VOUT1
VOUT2
LDO1
ENABLE
REFERENCE
LDO2
EN2
MIC5370 Block Diagram
VIN
EN1
GND
VOUT1
VOUT2
LDO1
ENABLE
REFERENCE
LDO2
EN2
AUTO
DISCHARGE
MIC5371 Block Diagram
Micrel, Inc. MIC5370/1
May 2011 3 M9999-052011-C
Ordering Information
Part Number Manufacturing
Part Number
Marking
Code Voltage
Junction
Temperature
Range
Package Lead
Finish
MIC5370-3.3/3.3YMT MIC5370-SSYMT 8SS 3.3V/3.3V –40°C to +125°C 6-Pin 1.6mm × 1.6mm
Thin MLF® Pb-Free
MIC5370-3.3/3.0YMT MIC5370-SPYMT SP8 3.3V/3.0V –40°C to +125°C 6-Pin 1.6mm × 1.6mm
Thin MLF® Pb-Free
MIC5370-3.3/2.8YMT MIC5370-SMYMT SM8 3.3V/2.8V –40°C to +125°C 6-Pin 1.6mm × 1.6mm
Thin MLF® Pb-Free
MIC5370-3.3/2.6YMT MIC5370-SKYMT S8K 3.3V/2.6V –40°C to +125°C 6-Pin 1.6mm × 1.6mm
Thin MLF® Pb-Free
MIC5370-3.3/1.8YMT MIC5370-SGYMT SG8 3.3V/1.8V –40°C to +125°C 6-Pin 1.6mm × 1.6mm
Thin MLF® Pb-Free
MIC5370-3.0/3.0YMT MIC5370-PPYMT P8P 3.0V/3.0V –40°C to +125°C 6-Pin 1.6mm × 1.6mm
Thin MLF® Pb-Free
MIC5370-3.0/2.8YMT MIC5370-PMYMT PM8 3.0V/2.8V –40°C to +125°C 6-Pin 1.6mm × 1.6mm
Thin MLF® Pb-Free
MIC5370-3.0/2.6YMT MIC5370-PKYMT P8K 3.0V/2.6V –40°C to +125°C 6-Pin 1.6mm × 1.6mm
Thin MLF® Pb-Free
MIC5370-3.0/1.8YMT MIC5370-PGYMT PG8 3.0V/1.8V –40°C to +125°C 6-Pin 1.6mm × 1.6mm
Thin MLF® Pb-Free
MIC5370-2.8/2.8YMT MIC5370-MMYMT MM8 2.8V/2.8V –40°C to +125°C 6-Pin 1.6mm × 1.6mm
Thin MLF® Pb-Free
MIC5370-2.8/2.6YMT MIC5370-MKYMT M8K 2.8V/2.6V –40°C to +125°C 6-Pin 1.6mm × 1.6mm
Thin MLF® Pb-Free
MIC5370-2.8/1.8YMT MIC5370-MGYMT MG8 2.8V/1.8V –40°C to +125°C 6-Pin 1.6mm × 1.6mm
Thin MLF® Pb-Free
MIC5370-2.8/1.5YMT MIC5370-MFYMT MF8 2.8V/1.5V –40°C to +125°C 6-Pin 1.6mm × 1.6mm
Thin MLF® Pb-Free
MIC5370-2.8/1.2YMT MIC5370-M4YMT J48 2.8V/1.2V –40°C to +125°C 6-Pin 1.6mm × 1.6mm
Thin MLF® Pb-Free
MIC5370-1.8/1.2YMT MIC5370-G4YMT 8G4 1.8V/1.2V –40°C to +125°C 6-Pin 1.6mm × 1.6mm
Thin MLF® Pb-Free
MIC5370-1.2/1.0YMT MIC5370-4CYMT 84C 1.2V/1.0V –40°C to +125°C 6-Pin 1.6mm × 1.6mm
Thin MLF® Pb-Free
MIC5371-3.3/3.3YMT* MIC5371-SSYMT 9SS 3.3V/3.3V –40°C to +125°C 6-Pin 1.6mm × 1.6mm
Thin MLF® Pb-Free
MIC5371-3.3/3.0YMT* MIC5371-SPYMT 9SP 3.3V/3.0V –40°C to +125°C 6-Pin 1.6mm × 1.6mm
Thin MLF® Pb-Free
MIC5371-3.3/2.8YMT* MIC5371-SMYMT 9SM 3.3V/2.8V –40°C to +125°C 6-Pin 1.6mm × 1.6mm
Thin MLF® Pb-Free
MIC5371-3.3/1.8YMT* MIC5371-SGYMT 9SG 3.3V/1.8V –40°C to +125°C 6-Pin 1.6mm × 1.6mm
Thin MLF® Pb-Free
MIC5371-3.0/3.0YMT* MIC5371-PPYMT 9PP 3.0V/3.0V –40°C to +125°C 6-Pin 1.6mm × 1.6mm
Thin MLF® Pb-Free


Produktspezifikationen

Marke: Microchip
Kategorie: Nicht kategorisiert
Modell: MIC5370

Brauchst du Hilfe?

Wenn Sie Hilfe mit Microchip MIC5370 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Microchip

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-